Page 1
G A L L E R Y
RUSH PAR 2 RGBW
Zoom
The RUSH PAR 2 RGBW Zoom is a bright single-lens LED PAR Can
with fully premixed color from 12 RGBW LEDs and a spectacular 10 –
60 ° zoom. It offers electronic dimming and strobe and comes with a
flexible bracket for floor or truss mounting.
Bright LED PAR Can
12x10 W RGBW LEDs
Single
-lens wash with fully premixed color
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Dynamic Effects
Control and Programming
Optics
Construction
Installation
•
Bright LED PAR Can
•
12x10 W RGBW LEDs
•
Single
-lens wash with fully premixed color
•
10° to 60° zoom
•
Electronic dimming and strobe
•
Temperature-controlled fan cooling
•
Flexible bracket – floor or truss-mounted
•5-
pin XLR
Length: 266 mm (10.5 in.)
Width: 287 mm (11.3 in.)
Height: 329 mm (13.0 in.)
Weight: 5.5 kg (12.2 lbs.)
Color mixing: RGBW
Color selection: 33 color presets plus full white, 'color wheel' effects
Electronic dimming: 0 - 100%
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Control options: DMX, stand-alone scene
DMX channels: 5/9
White balance control: RGB adjustment
DMX address setting: Control panel with LCD display
Stand-alone programming: Control panel with LCD display
Protocol: USITT DMX512/1990
Light source: 12 x 10 W RGBW Osram Ostar LEDs
Zoom range: 10° - 60°
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions:
Housing: Aluminum
Color(s): Black
Protection rating: IP20
Mounting: Adjustable bracket, surface or truss mount
Orientation: Any
Location: Indoor use only
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Page 2
Connections
Electrical
Typical Power and Current
Thermal
Approvals
Included Items
Accessories
Related Items
Ordering Information
AC power in/thru: Neutrik PowerCon
DMX data in/thru: 5-pin XLR
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 151 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
120 V, 60 Hz: 1.3 A, 151 W, PF 0.993
230 V, 50 Hz: 0.7 A, 148 W, PF 0.961
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a
deviation of +/- 10%.:
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C
Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 520 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety (pending): UL 1573
US EMC: 47 CFR Part 15 Class A
Canadian safety (pending): CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
Power cable 1.5 m
Mounting bracket
Gel Frame for RUSH PAR 2 (set of 10): P/N 46000106
Cables, 16 A, for connection to power in chains:
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 3 m (9.9 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 3.25 m (10.7 ft.): P/N 11541511
Power connectors:
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N
05342805
DMX link
DMX termination plug, 3-pin male XLR: P/N 91613017
Installation hardware:
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
RUSH Software Uploader 1™: P/N 91611399
RUSH PAR 2 RGBW Zoom™ in cardboard box: P/N 90480040
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...