Page 1
G A L L E R Y
RUSH MH 4 Beam
This compact beam moving head for smaller venues blasts an intense
and narrow beam for spectacular mid-air looks and effects. It houses
a fixed gobo wheel and color wheel with a multitude of effects
possible from a dimmer and strobe, 6-facet prism and focus.
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Dynamic Effects
Control and Programming
Lamp
Optics
Construction
Installation
Connections
Electrical
Typical Power and Current
Thermal
Length: 319 mm (12.6 in.)
Width: 255 mm (10.1 in.)
Height: 481 mm (19.0 in.)
Weight: 14 kg (30.9 lbs.)
Color wheel: 14 colors plus open, continuous and stepped scrolling, rotation with
variable direction and speed
Static gobo wheel: 17 gobos plus open, continuous and stepped scrolling, rotation
with variable direction and speed
Shutter: Strobe effect, pulse effects, instant open and blackout
Prism: 6-facet, indexing and rotation with variable direction and speed
Focus: Motorized
Dimmer:
0 - 100% continuous dimming
Pan: 540°
Tilt:
270°
Control system:
DMX
DMX channels: 13
Setting and addressing: Control panel with LCD display
DMX compliance: USITT DMX512/1990
16-bit control: Dimming, pan and tilt
Pan and tilt speed: Adjustable via onboard control panel and DMX
Position correction system: Available for pan and tilt
Osram HRI 132 W lamp models:
Approved lamp: Osram Sirius HRI 132 W
Color temperature: 8800 K
CRI (Color rendering index): 62
Average lifetime: 6000 hours*
*Manufacturer's figure:
Beam angle: 3°
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Minimum distance to illuminated surfaces: 6.5 m (21 ft. 4 in.)
Mounting points: Two quarter-turn brackets for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
AC power input: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 234 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
110 V, 60 Hz: 2.2 A, 234 W, PF 0.996
230 V, 50 Hz: 1.1 A, 231 W, PF 0.996
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Page 2
Approvals
Included Items
Accessories
Related Items
Ordering Information
Total heat dissipation (calculated, +/- 10%): 800 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
US EMC: 47 CFR Part 15 Class A
US safety: UL 1573
Canadian safety: CSA C22.2 No. 166
Power cable, 1.5 m, without mains plug
Two Omega clamp attachment brackets with 1/4-turn fasteners
Cables, 16 A, for connection to power in chains:
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 3 m (9 ft. 11 in.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 1.4 m (4 ft. 8 in.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 2.25 m (7 ft. 5 in.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input
connector, 3.25 m (10 ft. 8 in.): P/N 11541511
Power connectors:
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N
05342805
Installation hardware:
Half-coupler clamp: P/N 91602005
G-clamp (suspension with yoke vertically downwards only): P/N 91602003
Quick-trigger clamp (suspension with yoke vertically downwards only): P/N 91602007
RUSH™ Software Uploader 1: P/N 91611399
RUSH MH 4 Beam™ in cardboard box: P/N 90280030
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...