
RUSH MH 3 Beam
The RUSH MH 3 Beam is a powerful beam moving head that blasts an
intense and narrow long-throw beam for spectacular mid-
air looks
and effects. It houses a fixed gobo wheel and color wheel with a
multitude of effects possible from a dimmer, strobe effect, 8-facet
prism and focus.
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Dynamic Effects
Control and Programming
Lamp
Optics
Construction
Installation
Powerful beam moving head
Sharp, narrow long-throw beam
Mechanical dimming and strobe
Length: 418 mm (16.5 in.)
Width: 321 mm (12.7 in.)
Height: 489 mm (19.3 in.)
Weight: 20.5 kg (45.2 lbs.)
Color wheel: 14 colors plus open, rotation with variable direction and speed
Static gobo wheel: 17 gobos plus open, wheel rotation and shake
Pre-programmed effects: 31 pan and tilt macros, adjustable speed
Shutter: Strobe effect, pulse effects, instant open and blackout
Prism: 8-facet, indexing and rotation with variable direction and speed
Frost: Fade in/out
Zoom: Motorized
Focus: Motorized
Dimmer:
0 - 100%, four dimming curve options
Pan: 540°
Tilt:
Pan and tilt speed: Adjustable via onboard control panel and DMX
Control:
DMX
DMX channels: 19
Setting and addressing: Control panel with LCD display
DMX compliance: USITT DMX512/1990
Approved lamp: Philips MSD Platinum 5R
Color temperature: 8000 K
CRI (Color rendering index): 75
Average lifetime: 2000 hours
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Minimum distance to illuminated surfaces: 12 m (39 ft. 5 in.)
Mounting points: Two quarter-turn brackets for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Connections
Electrical
Typical Power and Current
Thermal
Approvals
Included Items
Related Items
Ordering Information
AC power input: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 350 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
110 V, 60 Hz: 3.1 A, 348 W, PF 0.990
230 V, 50 Hz: 1.6 A, 330 W, PF.0.917
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Total heat dissipation (calculated, +/- 10%): 1200 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety (pending): CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
Power cable, 1.5 m, without mains plug
Mounting brackets
RUSH™ Software Uploader 1: P/N 91611399
RUSH MH 3 Beam™ in cardboard box: P/N 90280010
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice