Martin Rush MH11 Beam User Manual

Page 1
G A L L E R Y
RUSH MH 11 Beam
The Martin RUSH MH 11 Beam is a high-intensity beam moving head designed for high end installations and rental applications. The RUSH MH 11 Beam utilizes the same 250W Platinum 11R lamp found in the Martin RUSH MH 7 Hybrid, but with refined beam optics that provide excellent intensity and sharp mid-air effects in a beam-only fixture. It also shares the same color temperature and palette with the RUSH MH 7 and MAC Axiom, for excellent color matching in a cost-
effective
beam-only fixture.
The high-
intensity lamp combined with class-leading optics in the MH
11 allows the fixture to achieve sharp, high
-output beam effects with a super-tight 2.6 degree beam angle. The fixture can produce a range of complex and precise mid-air looks utilizing 8 rotating and indexing gobos and an 8-
facet prism. The fixture has 13 selectable colors and
frost and motorized focus.
The fixture is a perfect fit for high-end live venue installations such as nightlife, houses of worship, and cruise ships. It also features a rugged industrial design for use in touring applications where Martin RUSH MH 7 and MAC Axiom fixtures are used.
Best-in-class optics for longer reach and greater impact
Feature-packed with a wealth of effects
Sturdy design built for the road
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Powerful 250 W Philips Platinum 11R lamp
Super tight 2.6° beam angle
8 rotating & indexing gobos
Ultra sharp, narrow long-throw beam
Mid
-air effects
10 selectable colors + CTO, CTB, UV
Frost effect
•8-facet circular prism
Motorized focus
3 + 5 pin XLR DMX connection
Neutrik TRUE 1 in and thru socket
Compact size—
L: 364 x W: 305 x H: 581 mm / L: 14.3 x W: 12.0 x H:
22.9 in
Low weight—
19.5 kg/43 lbs.
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Page 2
Physical
Dynamic Effects
Control and Programming
Lamp
Optics
Construction
Gobos
Installation
Connections
Electrical
Typical Power and Current
Thermal
Approvals
Included Items
Accessories
Length: 364 mm (14.4 in.)
Width: 305 mm (12.0 in.)
Height: 581 mm (22.9 in.)
Weight: 19.5 kg (43 lbs.)
Color wheel: 13 colors (incl. CTO and UV) + open, rotation with variable direction and speed
Rotating gobo wheel: 8 gobos + open, wheel rotation, gobo indexing, rotation and shake
Prism: 8-facet circular, indexing, rotation with variable direction and speed
Focus: Motorized, 16-bit coarse and fine control
Frost
Dimming: 0-
100%, coarse and fine control
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Pan: 660°
Tilt:
250°
Control options: DMX, stand-alone, RDM
DMX channels: 18 Setting and addressing: Control panel with backlit LCD display Pan and tilt speed: Adjustable via onboard control panel and DMX DMX compliance: USITT DMX512/1990 RDM compliance: ANSI E1.20
Approved lamp: Philips MSD Platinum 11R 250 W Color temperature: 6800 K +/- 250 K CRI (Color rendering index): 81 Average lifetime: 2000 hours*
*Under manufacturer's test conditions
Cutoff beam angle: 2.6°
Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Interchangeable rotating gobos
Permitted material: Steel or aluminum Diameter:
14 mm +/-0.2 mm (0.55 in. +/-0.008 in.) Max. image diameter: 13 mm (0.51 in.) Gobo thickness: 0.8 mm (0.031–0.032 in.)
Mounting points: Two quarter-turn omega brackets for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to illuminated surfaces: 10 m (33 ft.) Minimum distance to combustible materials: 200 mm (8 in.) Minimum clearance around fans and air vents: 200 mm (8 in.)
AC power in, thru: Neutrik TRUE1 DMX data in, thru: 3-pin and 5-pin locking XLR
AC power: 100-120 / 200-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode
120 V, 60 Hz: 380 W, 3.5 A, PF 0.9 230 V, 50 Hz: 370 W, 1.7 A, PF 0.9
Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.
Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1300 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3 US safety: UL 1573 US EMC: CFR Title 47 Part 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ (pending): RCM
Philips MSD Platinum 11R 250 W lamp (installed) Power cable, 1.5 m (4.9 ft.), without mains plug Two Omega clamp attachment brackets with 1/4-turn fasteners
Philips MSD Platinum 11R 250 W lamp: P/N 50481205
Cables, 16 A, for connection to power
Power input cable, H07RN-F, 2.5 mm²,
14 AWG, bare ends to Neutrik TRUE1 NAC3FX
­W (female), 1.5 m (4.9 ft.): P/N 91611797 Power input cable, H07RN-F, 2.5 mm²,
14 AWG, bare ends to Neutrik TRUE1 NAC3FX
-
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Page 3
Related Items
Ordering Information
W (female), 5 m (16.4 ft.): P/N 91611786 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female),
1.5 m (4.9 ft.): P/N 91610173 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cables, 16 A, for relaying power in chains
Power relay cable, H07RN-F, 2.5 mm²,
TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power relay cable, H07RN-F, 2.5 mm²,
TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power relay cable, H07RN-F, 2.5 mm²,
TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789 Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
DMX data link
DMX termination plug, 3-pin male XLR: P/N 91613017
Installation hardware
G-clamp (installation hanging vertically downwards only): P/N 91602003 Half-coupler clamp: P/N 91602005
RUSH® Software Uploader 2: P/N 91611770
RUSH® MH 11 Beam in cardboard box: P/N 90280130
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...