Martin MH8 User manual

RUSH MH 8 Mini Profile

The RUSH MH 8 Mini Profile is Martin Professionals smallest moving head to date with super sharp optics which delivers a high output that punches above its class. High speed pan & tilt with separate color and gobo wheels allows designers maximum flexibility from the lounge bar to the high energy dance floor all within an affordable price bracket.

The MH 8 Mini Profile uses the latest 18W White LED Technology that delivers super sharp optics with over 800 Lumens via a 14 degree beam angle. 8 individual gobos and colors are available with electronic strobe/dimming, manual focus and high speed Pan and Tilt via DMX or Audio Trig. This compact moving head only weighs 4.5KG.

Super Sharp Optics

High Output 18W White LED

Separate Color and Gobo Wheel

F E A T U R E S

•Super Sharp Optics

•Gobo projection is crisp and flat which is class leading in this product category

•High Output

•Latest generation Osram 18W LED allows >800 Lumens which is class leading in this category.

•Separate Color and Gobo Wheel

•Allows designers maximum flexibility

T E C H N I C A L S P E C I F I C A T I O N S

Physical

Length: 157 mm (6.1 in.) Width: 237 mm (9.3 in.) Height: 327 mm (12.9 in.) Weight: 4.5 kg (9.9 lbs.)

Dynamic Effects

Color wheel: 8 colors plus open, variable and random rotation Gobo wheel: 8 static gobos plus open, variable and random rotation Strobe: Variable from 3 - 20 Hz, pulse effects and random strobe Electronic dimming: 0 - 100%, four dimming curve options

Pan: 540°

Tilt: 230°

Control and Programming

Control options: DMX, 4 stand-alone shows, master/slave DMX channels: 10

Stand-alone trigger: Auto, music DMX compliance: USITT DMX512/1990

Interface: Control panel with backlit LCD display

Optics

Light source: 18 W OSRAM LE UW Q8WP LED

Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle: 14°

Focus: Manual

*Figure obtained under manufacturer's test conditions

Construction

Color: Black

Housing: High-impact flame-retardant thermoplastic IP rating: IP 20

Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

	Installation
	Mounting points: Bracket for rigging clamp
	Location: Dry location only, must be fastened to surface or structure
	Orientation: Vertical (head down if suspended)
	Minimum distance to illuminated surfaces: 200 mm (8 in.)
	Minimum distance to combustible materials: 100 mm (4 in.)
	Minimum clearance around fans and vents: 100 mm (4 in.)
	Connections
	AC power input: IEC
	DMX data in/out: 3-pin and 5-pin locking XLR
	Electrical
	AC power: 100-240 V nominal, 50/60 Hz
	Power supply unit: Auto-ranging electronic switch mode
	Fuse: T 2.0 A
	Typical Power and Current
	120 V, 60 Hz: 52 W, 0.8 A
	230 V, 50 Hz: 50 W, 0.5 A
	Typical half-cycle RMS inrush current: 6.4 A
	Measurements made at nominal voltage with all LEDs at full intensity. Allow for a
	deviation of +/- 10%.	Thermal
	Cooling: Forced air (temperature-regulated, low noise)	Thermal
	Cooling: Forced air (temperature-regulated, low noise)
	Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 0° C (32° F)

Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 180 BTU/hr.

Approvals

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493

EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-4-2, EN 61547 US safety: UL 1573

US EMC: CFR Title 47 Part 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ (pending): RCM

Included Items

Power cable, 1.9 m (6.3 ft.) without mains plug Power cable, 1.9 m (6.3 ft.) with US plug Bracket for rigging clamp attachment

Accessories

Installation hardware:

G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005 Quick-trigger clamp: P/N 91602007

Safety cable, safe working load, 50 kg (110 lbs.): P/N 91604003