Martin MAC 401 CT, MAC 401 DUAL specifications

Speciﬁcations MAC 401 Dual

Tegan and Sara World Tour Photos: Lindsey Byrnes

Physical

Length: 221 mm (8.7 in.) Width: 505 mm (19.9 in.) Height: 527 mm (20.7 in.) Weight: 21 kg (46.3 lbs.) incl. 2 head modules,

excl. brackets

Dynamic Effects

Color mixing: RGB or HSV Red or hue: 0 - 100% Green or saturation: 0 - 100% Blue or value: 0 - 100% Color temperature control: Variable 10 000 - 2000 K Electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white,

variable-speed color wheel rotation effect and random color

Pre-programmed effects: Two super imposable chase/pulse/ﬂip/ ﬂicker/strobe/static effects with variable intensity, x-fading and ‘pixel wheel’ rotation speed

Strobe effect: Electronic, with pulse and random effects

Electronic dimming: 0 - 100%, four dimming curve options Zoom: 17° - 49° Pan: 630° with two speed settings Tilt: 300° with two speed settings

Optics

Light source: 36 Osram multi-color LED high power emitters

Connections

AC power input: Neutrik PowerCon DMX data in/out: 5-pin locking XLR, RJ-45

Electrical

AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 386 W (one RGB/zoom LED module

installed) Maximum total power consumption: 766 W (two RGB/zoom LED modules

installed) Power supply unit: Electronic switch mode Main fuses: 10 AT (slow blow

Thermal

Cooling: Filtered forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state: 80° C (176° F) Total heat dissipation (calculated, +/- 10%),

one module installed: 1312 BTU/hr Total heat dissipation (calculated, +/- 10%),

two modules installed: 2604 BTU/hr

Approvals

EU safety: EN 60598-1, EN 60598-2-17 EU EMC: EN 61000-6-1:2007, EN 61000-6-3:2007

US safety: UL 1573 Canadian safety: CAN/CSA-E598-2-17-98

) x 2

MAC 401 Dual

MAC 401 CT Zoom

™

Control and Programming

Control: DMX Color control modes: RGB or HSV DMX channels: 13/17/21/25/33 depending on control

mode & pixel grouping Setting and addressing: Control panel with LED display Protocol: USITT DMX512/1990 Transceiver: RS-485

Construction

Color: Black Housing: High-impact ﬂame-retardant

thermoplastic and die-cast aluminum Protection rating: IP20

Installation

Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Minimum distance to combustible materials: 200 mm (7.9 in.) Minimum distance to illuminated surfaces: 200 mm (7.9 in.) Minimum distance to persons and objects

in beam zone: 1 m (3.3 ft.)

Included Items

Two Omega clamp attachment brackets with 1/4-turn fasteners: P/N 91602001

User manual: P/N 35000229 Neutrik PowerCon NAC3FCA

male input connector: P/N 05342804 2 x 10 AT main fuses (installed): P/N 05021029

Accessories

MAC 401 Dual Color Frame Kit: P/N 91610102 MAC 401 Dual RGB Zoom Module: P/N 91611325 MAC 401 Dual Double Flightcase: P/N 91510150 G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005 Quick trigger clamp: P/N 91602007 Safety wire, universal,

safe working load 50 kg (110.2 lbs.): P/N 91604003

Ordering Information

MAC 401 Dual, in cardboard box: P/N 90231200 MAC 401 CT Zoom Module: P/N 91611349 MAC 401 CT Zoom Fixture in Cardboard Box: P/N 90231210

Martin Professional A/S Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com

Founded in 1987 and headquartered in Aarhus, Denmark, Martin lighting solutions are industry standard on tours and events, theatres, nightclubs, and major television studios around the world, as well as indoor and outdoor architecture and commercial applications. We maintain a presence in the USA, UK, Germany, Denmark, France, Italy and Singapore with associated companies in Japan, the Middle East, Hong Kong and Argentina. We operate the industry’s most complete and capable distributor network with local partners in nearly 100 countries. Martin’s parent company, Schouw & Co, is an industrial conglomerate with 2009 revenue of approximately 1.5 billion USD. For more information please visit www.martin.com

Progressive visual expression!

Individual LED segment control of color and intensity allows users to create fresh, unique effects for increased design ﬂexibility.

The Martin MAC 401 Dual is a creatively fresh LED moving washlight and pixel head that adds a whole new level of visual expres-

ows and the messy multi-color lens looks of traditional LED ﬁxtures. LEDs are calibrated at the factory for excellent color consistency across ﬁxtures.

sion to any show. Wash, pixels or beams, the MAC 401 Dual lets you decide.

Bright and efﬁcient

The MAC 401 Dual is surprisingly powerful with up to Advanced wash characteristics combine with a host of other useful features like individual LED segment control for pixel mapping video content, fully blended colors, large face with distinct fat beam look, fast zoom and innovative double-sided design to offer designers all-new possibilities

6,600 lumens of output and excellent optical performance.

The LEDs are extremely efﬁcient and with a 50,000-hour

rated lifetime you can forget about those continuous lamp

replacements and enjoy the beneﬁt of a lower cost of own-

ership. for truly original visual designs.

Broad beam

The MAC 401 Dual will appeal to those designers who always strive to create a new and better experience for the audience. More than a traditional wash ﬁxture, the MAC 401 Dual is something radically new.

A better blend of colors

Thirty-six, new, multi-color, single-point source LEDs produce an outstanding color quality. The 401 Dual’s innovative color mixing system fully blends colors at the source

A unique large lens face produces a refreshingly novel

broad beam look. The distinctive wider beam has a brilliant

appearance mid-air, gives a fresh look to any show and has

become an LD favorite.

Speedy beam angle adjustments

The MAC 401’s beam angle is speedy to adjust via a fast

linear zoom. Spreads from hypermode tight to a wide wash

take less than 0.5 seconds. before they leave each lens so that individual source colors are not seen. This eliminates the problem of rainbow shad-

Silence, please

For television and theater settings, a silent mode option vir-

tually eliminates fan use for extended periods for noise-free

operation. And for television and ﬁlm, the LEDs give com-

pletely ﬂicker-free looks on camera.

Color Temperature (Kelvin)

2,000 3,000 4,000

The MAC 401 includes a variable CTC mode for color temperature changes from 2,000 – 10,000 K.

Multi-color, single-point source LEDs produce a broad range of outstanding colors that are fully blended before they leave each lens. The result is a better color blend with no rainbow shadows or sloppy multi-color lens looks.

5,000

6,000 7,000 8,000 9,000 10,000

High speed pan and tilt motors generate quick acceleration

with smooth, accurate movement. A special fast mode set-

ting boosts pan/tilt speed when needed.

Twice the creativity

No other ﬁxture offers the dual functionality of the MAC

401. The clever double-sided design allows for alternating effects and adds a whole new dimension to lighting design. The plug-in feature allows users to add modules to the back of the ﬁxture - other LED modules or special effect modules – for all-new creative possibilities and increased production value.

MAC 401 CT Zoom™

The MAC 401 CT Zoom is a color temperature variable white light source wash luminaire with fast zoom. The MAC 401 CT Zoom not only delivers more light than traditional RGB LED ﬁxtures, but projects a much better light quality, making it excellent for highlighting skin tones or textiles. It is also available as a module that easily ﬁts onto either side of any MAC 401 Dual, creating a white light or color plus white light source. Power consumption is much lower than traditional tungsten washlights.

Individual LED segment control

The MAC 401 Dual’s 36 lenses are grouped into four equal segments, each segment with individual color and intensity control for new looks like bow tie and half-and-half effects. Control all four LED segments together; top and bottom; left and right; or control each segment individually.

For further effects options, an accessory gel frame holder allows users to insert frost ﬁlters or other custom ﬁlters.

Built-in effects

A host of built-in effects allows for a variety of different looks fast. Overlay effects channels to create even more effects or control each LED segment individually to create your own.

Control options

For maximum control ﬂexibility, both RGB and Hue/Saturation control modes are provided.

P3 over Ethernet connectors are also included to future-protect ﬁxture compatibility with Martin’s P3-100 System Controller for video signal processing.

A powerful broad beam produces a refreshingly original mid-air look while a fast linear zoom generates beam angles from narrow to wide.

Firmware updates via DMX input make it easy to add new software features.

Energy efﬁcient

The MAC 401 Dual offers all the beneﬁts of LED technology like greater reliability, less maintenance and increased energy efﬁciency for a lower cost of ownership. Power consumption is only 386 W with all LEDs at full and because the LEDs only draw power when light is emitted and only at the level needed, the 401 Dual provides enormous energy savings over HID ﬁxtures that run continuously at full power regardless of light level.

Durable, user-friendly design

The MAC 401 Dual is robust for the rigors of the rental market yet lightweight enough to be used in a variety of

The MAC 401 Dual’s plug-n-play back panel allows users to add an LED module, such as the MAC 401 CT Zoom, or a special effect module to the ﬁxture’s reverse side for twice the design possibilities.

applications. A modular design makes for easy service and maintenance. And for even greater maintenance ease and savings, the MAC 401 Dual will support RDM feedback protocol as a future ﬁrmware release.

Thoroughly ﬁeld-tested, the 401 Dual is CE, ETL & CETL approved. A switch mode power supply guarantees complete worldwide compatibility.