MAC 2000 Beam XB™ / MAC 2000 Beam
Convert any MAC 2000 Wash XB or MAC 2000 Wash into a powerful beam fixture
™
Get the most out of your gear!
Compact yet loaded
Despite a surprisingly compact size, the MAC 2000 Beam
XB includes all the proven features of the MAC 2000 Wash
XB including full color mixing, color wheel, smooth dimming, strobe, variable CTO, and zoom (wash effect).
Seamless color mixing plus color wheel
The MAC 2000 Beam XB’s color mixing system offers a
broad spectrum of colors. A four-position (plus open) color
wheel is interchangeable, allowing designers to customize
shades and complement perfectly the fixture’s CMY color
mixing system.
Indochine
Stade de France
Lighting Designer:
Olivier Payen
Rental Company: Arpege
Easily convert two of the most advanced wash
lights on the market - the Martin MAC 2000
Wash XB and MAC 2000 Wash - into a
powerful beam fixture with an inexpensive
conversion kit that installs in minutes.
Ideal for any large scale event where both beam and wash
effects are required such as stadium and arena shows, the
conversion kit gets the most out of your gear, eliminating
the need to invest in a completely new fixture.
Simple, inexpensive upgrade
The MAC 2000 Beam XB upgrade kit consists of a new
front lens module with micro-Fresnel lens and a set of four
beam effect gobos/apertures. The kit installs in less than 5
minutes and also works with the MAC 2000 Wash.
Components can be easily uninstalled and the fixture returned to a standard Wash configuration at any time.
Super bright
The 1500 W MAC 2000 Beam XB delivers a fat, tight and
amazingly bright hard-edge beam, perfect for big beam
effects and long throws. Even at very narrow beam angles,
output is outstanding with very high intensity.
An electronic ballast offers hot-lamp re-strike and the
advantage of flicker-free light.
High efficacy and efficient optics
The extremely high output from the MAC 2000 Beam XB is
made possible by a combination of high efficacy and very
efficient optics. If users require the fixture to match the
power output of existing 1200 W fixtures, a reduced 1200
W mode can be employed, saving energy and increasing
lamp life.
Smooth dimming and strobe
The fixture allows for very smooth fading via a combined
dimmer/shutter. Mechanical dimming is from 0 to 100%,
and the shutter offers rapid strobe effects up to 10 Hz with
instant open and blackout. In addition to mechanical dimming, an optional dimming wheel can replace the color
wheel.
Color temperature flexibility
A continuously variable color correction system adds the
flexibility to gradually and smoothly increase or decrease
color temperature. It is also useful when working alongside
tungsten halogen or for smoothing out color temperature
inconsistencies when working alongside older lamps.
Beam effect gobos
A gobo wheel with 4 static beam effect gobos/apertures
plus open allows for wider or tighter beam effects as well as
multiple beams or cone looks.
Zoom option wash effect
With a motorized zoom option, the fixture generates a wash
effect instead of a hard-edge beam. The wash effect can be
zoomed from tight to wide.
Proven reliability
The MAC 2000 Beam XB keeps the same optical train,
effects and form as the MAC 2000 Wash XB, guaranteeing
advantages such as proven reliability.
Easy to use and maintain
The MAC 2000 Beam XB is constructed of rugged, modular components for easy maintenance. It has an auto-ranging switch-mode for worldwide use and features the no
hassle reliability that has made the MAC 2000 series a
market leader.
Specifications
Physical
Length: 408 mm (16.1 in.)
Width: 490 mm (19.3 in.)
Height: 764 mm (30.1 in.), head straight up
Weight: 36.6 kg (80.7 lbs.)
Lamp
Type: 1500 W short-arc discharge
Fitted as standard: Osram HTI 1500 W/D7/60 SharXS
Color temperature: 6000 K
CRI (Color rendering index): >90
Average lifetime: 750 hours
Hot restrike: Yes
Socket: Double-ended SFc 10-4 with key
Ballast: Electronic
Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Color correction: 0 - 178 mireds, continuously variable
Color wheel: 4 interchangeable filters (incl. UV
transmitter), full and split colors, continuous rotation
Beam effects: Wheel with 4 interchangeable beam
effect gobos plus open
Mechanical dimmer: 0 - 100%
Shutter: Strobe effect up to 10 Hz, pulse effects,
instant open and blackout
Zoom: Motorized
Hyper mode: Narrow beam with diffuser removed
Pan: 540°
Tilt: 267°
Construction
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
Installation
Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible
Orientation: Any
Connections
AC power input: 3 m (9.8 ft.) integral cable without
power plug
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 200-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic
switch-mode
Main fuse: 15 AT (x 2)
Thermal
Cooling: Filtered forced air (temperature-regulated)
Maximum ambient temperature (Ta max.):
40° C (104° F)
Maximum surface temperature, steady state,
Ta=40° C (104° F): 175° C (347° F)
Total heat dissipation (calculated, +/- 10% at 230 V,
50 Hz): 6120 BTU/hr.
The MAC 2000 Wash XB Beam Upgrade
Kit contains the following items:
MAC 2000 XB Beam front lens assembly: P/N 55204010
Small Aperture Ø18 beam effect gobo: P/N 43006015
Cone beam effect gobo: P/N 43006012
Medium Aperture Ø28 beam effect gobo: P/N 43006014
Three Dots beam effect gobo: P/N 43006013
Warning label (min. distance to illuminated surfaces):
P/N 33150093
Accessories
GE CSR1500/S/DE/60S Staybright lamp: P/N 97010332
Philips MSR Gold 1510 SA/DE lamp: P/N 97010345
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
T-shaped omega bracket with quarter-turn fasteners:
P/N 91602008
Quick trigger clamp: P/N 91602007
MAC 2000 double flightcase: P/N 91510017
Ordering Information
Beam Kit for MAC 2000 Wash and XB: P/N 91610103
Control and Programming
DMX channels: 19/21
Setting and addressing: Control panel with
LED display
16-bit control: Pan & tilt
Movement control options: Tracking and vector
Approvals
EU safety: EN 60598-2-17
EU EMC: EN 55 015, EN 55 103-1, EN 61 547
US safety: UL 1573
Canadian safety: CAN/CSA E60598-1, CAN/CSA
E598-2-17
Protocol: USITT DMX512/1990
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link
Included Items
Osram HTI 1500 W/D7/60 SharXS lamp (installed):
P/N 97010322
30 mm (1.2 in.) aperture ring: P/N 23807480
40 mm (1.6 in.) aperture ring: P/N 23807460
45 mm (1.8 in.) aperture ring: P/N 23807470
Two Omega clamp attachment brackets with
1/4-turn fasteners: P/N 91602001
Martin Professional A/S Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Founded in 1987 and headquartered in Aarhus, Denmark, Martin lighting solutions are industry standard on tours and events, theatres, nightclubs, and major television studios around the world, as well as indoor and outdoor
architecture and commercial applications. We maintain a presence in the USA, UK, Germany, Denmark, France, Italy and Singapore with associated companies in Japan, the Middle East, Hong Kong and Argentina. We operate the
industry’s most complete and capable distributor network with local partners in nearly 100 countries. Martin’s parent company, Schouw & Co, is an industrial conglomerate with 2009 revenue of approximately 1.5 billion USD.
For more information please visit www.martin.com
©2010 Martin Professional A/S Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...