Martin Jem Hazer Pro User Manual
user manual
P/N 35010039-C
READ AND SAVE THESE INSTRUCTIONS
2 Dimensions
Dimensions
All dimensions are in millimeters
© 2013-2014 Martin Professional™ ApS. Information subject to change without notice. Martin
Professional and all affiliated companies disclaim liability for any injury, damage, direct or
indirect loss, consequential or economic loss or any other loss occasioned by the use of,
inability to use or reliance on the information contained in this document. The Martin logo, the
Martin name, the Harman name and all other trademarks in this document pertaining to
services or products by Martin Professional or its affiliates and subsidiaries are trademarks
owned or licensed by Martin Professional or its affiliates or subsidiaries.
Contents 3
Contents
Dimensions ................................................................................................................................ 2
Contents ..................................................................................................................................... 3
Safety information ...................................................................................................................... 5
Product overview ....................................................................................................................... 8
Product description ................................................................................................................ 8
Features at a glance ............................................................................................................... 8
Product details ....................................................................................................................... 9
Quick Start ............................................................................................................................... 10
Setting up ............................................................................................................................. 10
Making haze ......................................................................................................................... 10
Switching off ......................................................................................................................... 10
Installation and setting up ........................................................................................................ 11
Location ............................................................................................................................... 11
AC power.............................................................................................................................. 11
Setting up ............................................................................................................................. 12
Final checks ......................................................................................................................... 12
Turning on the power ........................................................................................................... 12
Turning off the power ........................................................................................................... 12
Control settings ........................................................................................................................ 13
Overview .............................................................................................................................. 13
Quick access buttons .......................................................................................................... 13
Setting Run mode ................................................................................................................. 14
Setting Haze density ............................................................................................................. 14
Setting Fan speed ................................................................................................................ 14
Auto Fan Mode ..................................................................................................................... 14
Setting the Timer .................................................................................................................. 14
Setting the DMX base address ............................................................................................. 15
Setting the master-slave link mode ...................................................................................... 15
Aux option ............................................................................................................................ 15
PSI option ............................................................................................................................. 15
Priming the machine after fluid out....................................................................................... 15
Resetting options to factory settings .................................................................................... 15
Remote control ........................................................................................................................ 18
Overview .............................................................................................................................. 18
Functions .............................................................................................................................. 18
Connection ........................................................................................................................... 18
DMX control ............................................................................................................................. 19
Overview .............................................................................................................................. 19
Connection ........................................................................................................................... 19
DMX functions ...................................................................................................................... 19
RDM operation ..................................................................................................................... 20
Haze fluid types ........................................................................................................................ 21
Basic service ........................................................................................................................... 22
Cleaning ............................................................................................................................... 22
Fuse replacement................................................................................................................. 22
Troubleshooting ....................................................................................................................... 23
Status messages ...................................................................................................................... 24
Resetting the machine after fluid out .................................................................................... 24
4
Contents
Specifications .......................................................................................................................... 25
Safety information 5
Safety information
The following symbols are used to identify important safety information:
Caution! Safety
hazard. Risk of
personal injury.
Caution! Burn
hazard. Hot
surface. Do not
touch.
Danger!
Hazardous
voltage. Contact
will cause electric
shock.
Caution! Fire
hazard.
Warning! This product is not for household use. It presents risks of injury due
to electric shock, burns, falls and respiratory problems!
Read this manual before operating the machine, follow the safety precautions
listed below, and observe all warnings in this manual and printed on the
machine. Use the system only as described in this manual and in accordance
with local laws and regulations.
If you have questions about how to operate the machine safely, or if you have
followed the instructions in this manual and the machine is malfunctioning,
please contact Martin Service.
Preventing electric shocks
• Always ground (earth) the machine electrically.
• Use only a source of AC power that complies with local building and
electrical codes, and that has both overload and ground-fault protection.
• Before connecting the haze machine to power, check that the voltage
indicated on the machine’s serial label matches your local AC power
voltage. If your AC power voltage does not match, do not use the
machine. Contact Martin Service for assistance.
• Before using the machine, check that all power distribution equipment
and cables are in perfect condition and rated for the current
requirements of all connected devices.
• If the machine or any cables connected to it are in any way damaged,
defective, wet, or show signs of overheating, stop using the machine and
contact Martin Service for assistance. If the supply cord is damaged, it
must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
• Disconnect the machine from AC power before servicing and when not
in use.
• This system is not waterproof and should not be exposed to wet outdoor
conditions. Do not immerse in water or any other liquid. Do not expose to
high-pressure water jets.
• Do not spill fluid over or inside the machine. If fluid is spilled, disconnect
AC power and clean with a damp cloth. If fluid is spilled onto electronic
parts, take the system out of service and contact Martin for advice.
6 Safety information
• Do not remove the covers or attempt to repair a faulty machine. Refer any
service not described in this manual to Martin.
• Do not operate the machine if any parts are damaged, defective or
missing.
• Moisture and electricity do not mix. Do not aim haze output at electrical
connections or devices.
Preventing burns and fire
• The haze produced by the machine is hot enough to cause burns when it
leaves the nozzle, and very hot droplets of fluid escape occasionally.
Keep people and objects at least 60cm (24 inches) away from the haze
output nozzle.
• Do not touch the haze output nozzle during or after use – it becomes
extremely hot and remains hot for several hours after the machine has
been shut down.
• Haze output contains glycol, a flammable alcohol that burns with an
almost invisible blue flame. Do not point haze output at sources of
ignition such as open flames or pyrotechnic effects.
• Do not attempt to bypass thermostatic switches, fluid sensors or fuses.
• Replace fuses only with ones of the type and rating specified in this
manual for the machine.
• Provide a minimum free space of 100mm (4 inches) around the machine.
• Provide a minimum free space of 500mm (20 inches) around fans and air
vents and ensure free and unobstructed air flow to and around the
machine.
• Keep the machine at least 60cm (24 inches) away from combustible and
heat-sensitive materials.
• Do not operate the machine if the ambient temperature (Ta) is below 5°
C (41° F) or above 40° C (104° F).
• Do not operate the machine if the relative air humidity exceeds 80%.
Preventing injuries
• Ensure that the surface on which the machine is located or installed can
safely hold the weight of the machine.
• Do not install the machine over areas where people are present.
• This appliance is not intended for use by persons (including children)
with reduced physical sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
• Haze machines can cause condensation. Do not point the output at
smooth floors. Floors and surfaces may become slippery. Check these
frequently and wipe dry as necessary to avoid any danger of slipping.
• Ensure at least 2m visibility in areas where haze is being produced.
• Haze fluid contains food-grade glycols in solution but may present health
risks if swallowed. Do not drink it. Store it securely. If eye contact occurs,
rinse with water. If fluid is swallowed, give water and obtain medical
advice.
Safety information 7
Preventing breathing problems
• A haze machine can operate safely only with the haze fluid it is designed
for. Use the machine only with fluids specified under “Haze fluid options”
on page 21 or you may cause the release of toxic gases, presenting a
severe health hazard. You will also probably damage the machine.
• Do not create dense haze in confined or poorly ventilated areas.
• Do not expose people with health problems (including allergic and/or
respiratory conditions such as asthma) to haze output.
• Do not point haze output directly at a person’s face or at face height.
8 Product overvie
w
Product overview
Product description
The Jem Hazer Pro™ is a top of the range haze machine from Martin Professional
designed for the highly demanding professional market. Its ability to produce
exceptionally fine atmospheric haze in a short period of time makes it an ideal
choice for rental houses, shows, theatres, TV studios, clubs, bars, cruise ships,
theme parks and more.
Robust yet small and lightweight, the Jem Hazer Pro™ is capable of dispersing
an even, continuous haze with superior optical clarity and reflectivity, the perfect
small-particle haze for highlighting today’s highly defined light beams. A highquality air pump system ensures smooth distribution while a unique mixing
channel allows the haze to optimize before being expelled.
Congratulations on your purchase of the Jem Hazer Pro™ from Martin. Details of
the full range of Martin products are available on our website at www.martin.com.
Features at a glance
• Finest haze production in its class
• Small particle, even haze
• Continuous output
• Water-based fluid with long hang time
• Low noise
• Lightweight
• Variable haze and fan controls with 1% increments
• 2.5 liter fluid capacity
• Sealed fluid system for transportation
• Advanced Pump Technology (APT)
• Battery powered automatic shutdown sequence prevents clogging
• RDM ready
• On-board DMX 3-pin and 5-pin
• User-friendly on-board control panel
• Optional Flying Kit and Digital Remote Control
Use only Martin C-Plus Haze Fluid™. Use of other fluid will
void warranty.
Product overvie
w
9
Product details
Digital control
panel
Warning, high
temperature vapour and
surfaces!
Power inlet
connector
Main powe
r
switch
Digital remote
plug
A
VR program
upload socket
and status LEDs
5 pin DMX
input and
link
3 pin DMX
input and
link
Fluid tank
Haze output
port
Loading...