Martin Ego 01, Ego 02, Ego 03 User Manual

Ego 01
Ego 02
Ego 03

Logo Projector

user manual

Measurements are expressed in millimeters.

324

305

© 2002-2004 Martin Professional A/S, Denmark.

All rights reserved. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from Martin Professional A/S, Denmark.

Printed in Denmark.

P/N 35000109, Rev. G

150

248

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Ego 01 / Logo Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ego 02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ego 03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

AC power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Installing a plug on the mains lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Overhead mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operation from the floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Linking multiple Egos for simultaneous control . . . . . . . . . . . . . . . . . . . . . . . . 9

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Setting the trig mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Adjusting the effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Focusing the Ego . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Selecting the gobo on an Ego 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Operation with the optional remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Basic service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Lamp maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Gobo replacement or removal (Ego 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Firmware updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

3

I

NTRODUCTION

Thank you for selecting a Martin Ego. The Ego series features 250 watt
flower effects with sharp projection quality optics in a moulded composite­plastic casing. They incorporate a 250-watt halogen lamp and a precise
focus adjustment that produces crisp projections.

Variable behavior tuning, by adjusting the dynamic, allows you to modify
the aggressiveness of the effect in relationship to the music - relaxed,
intermediate or quick. The Ego operates in either automatic or music­activated trigger mode.

A convenient handle and lens protection ring make for easy transport and
handling. A remote control is also available that enables the simultaneous
control of multiple Ego fixtures.

1

EGO 01 / LOGO PROJECTOR

The Ego 01 provides a flower effect with a range of gobos and colors on a
single effect wheel. In addition to variable behavior tuning, effect wheel
and mirror dish rotation speeds are controllable.

The Logo Projector is the same as the Ego 01, but it is primarily used to
project images around a specific theme.

EGO 02

The Ego 02 features an overlapping color wheel system offering more
than 200 color combinations and a manually selectable image effect
(etched gobo or textured glass gobo pattern). An interchangeable gobo
slot is available so that you can incorporate your own custom patterns or
accessories. In addition to variable behavior tuning, the rotation speeds of
the color wheels and mirror dish are also controllable.

4 Ego user manual

EGO 03

The Ego 03 is a kaleidoscopic effect with a range of gobo and color
combinations on a single effect wheel that are projected onto a series of
mirrored tunnels. In addition to variable behavior tuning, effect wheel and
mirrored-tunnel rotation speeds are controllable.

SAFETY INFORMATION

Warning! This product is not for household use. It presents risks of

lethal or severe injury due to fire and heat, electric shock, and
falls.

Read this manual before powering or installing the fixture, follow the
safety precautions listed below and observe all warnings in this manual
and printed on the fixture. If you have questions about how to operate the
fixture safely, please contact a Martin distributor for assistance. Refer any
service operation not described in this manual to a qualified technician.
Do not modify the fixture or install other than genuine Martin accessories
and upgrade kits.

Avoiding electric shocks

• Disconnect the fixture from AC power before removing or installing the
lamp, fuses, or any part, and when not in use.

• Always ground (earth) the fixture electrically.

• Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.

• Do not expose the fixture to rain or moisture.

• Refer all service to a qualified technician.

• Never operate the fixture with missing or damaged lenses and/or covers.

Protecting yourself and others from burns and fire

• Never attempt to bypass the thermostatic switch or fuses. Always replace
defective fuses with ones of the specified type and rating.

• Ensure that the air flow through fans and vents is free and unobstructed.

• Keep all combustible materials (for example fabric, wood, paper) at least

0.1 meters (4 inches) away from the fixture. Keep flammable materials
well away from the fixture.

• Do not illuminate surfaces within 0.3 meters (12 inches) of the fixture.

Introduction 5

• Provide a minimum clearance of 0.1 meters (4 inches) around fans and air
vents.

• Replace the lamp if it becomes defective or worn out, or before usage
exceeds the maximum service life. When replacing the lamp, allow the
fixture to cool for at least 5 minutes before opening the fixture or removing
the lamp. It can take up to 15 minutes for the fixture to cool completely.

• Never place filters or other materials over the lens or mirror drum.

• The exterior of the fixture can become hot. Allow the fixture to cool for at
least 5 minutes before handling.

• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C
(104° F).

• Do not stare directly into the light.

• Never operate the fixture without all lenses and covers installed: an
unshielded lamp emits dangerous UV radiation that can cause burns and
eye damage.

Preventing injuries due to falls

• When suspending the fixture above ground level, verify that the structure
can hold at least 10 times the weight of all installed devices.

• Verify that all external covers and rigging hardware are securely fastened
and use an approved means of secondary attachment such as a safety
cable.

• Block access below the work area whenever installing or removing the
fixture.

UNPACKING

The packing material is carefully designed to protect the fixture during
shipment - always use it to transport the fixture.

The Ego comes with the following:

• 3-meter, 3-wire IEC power cable

• User manual

6 Ego user manual