Atomic 3000 DMX
The Atomic 3000 DMX is a powerful and rugged, 3000 W high-
impact
strobe.
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Dynamic Effects
Control and Programming
Lamp
Construction
Installation
Connections
Electrical
Thermal
Approvals
Included Items
Accessories
Length: 425 mm (16.7 in.) without bracket
Width: 245 mm (9.6 in.) without bracket
Height: 240 mm (9.4 in.) without bracket
Weight: 7.5 kg (16.5 lbs.) without bracket
Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz
supply)
Blinder effect: Continuous with auto fade
Strobe intensity: Blackout - maximum
Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes,
blinder, single flash
Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
DMX channels: 1, 3, and 4 channel modes
Stand-alone control: Via N.O. or N.C. SPST switch
Stand-alone options: Selectable flash rate or blinder effect
Setting and addressing: DIP switch
DMX Compliance: USITT DMX512/1990
Receiver: RS-
Type: Xenon discharge
Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Housing: Steel
Finish: Electrostatic powder-coated
Color: Black
Minimum distance to combustible materials: 0.5 m (1.7 ft.)
Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)
Orientation: Any
Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket
Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG
DMX data in/out: 3-pin and 5-pin XLR sockets
AC power (MAX-7 model): 100-120 V nominal, 50/60 Hz
AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz
Peak current consumption: 33 A
Typical current consumption (MAX-15, high power mode): 8 A
Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
Power supply unit: Auto-ranging electronic switch-mode
AC mains power cable: 14 AWG or 2.5mm2
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum lamp socket temperature: 120° C (248° F)
EU safety: EN 60598-1, EN 60598-2-17
EU EMC: EN 50 081-1, EN 50 082-1
US safety: ANSI/UL 1573
Canadian safety: CSA C22.2 No. 166
MAX-15 Xenon lamp (installed, EU model): P/N 97010307
MAX-7 Xenon lamp (installed, US model): P/N 97010308
User manual: P/N 35000094
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Spare Parts
Ordering Information
Atomic Detonator: P/N 90760020
Atomic Colors for Atomic 3000: P/N 91611086
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
MAX-15 lamp for use with 200-240 V power: P/N 97010307
MAX-7 lamp for use with 100-120 V power: P/N 97010308
Main fuse (20 AT): P/N 05020040
Atomic 3000 DMX EU model (MAX-15 lamp, 200-240 V): P/N 90424200
Atomic 3000 DMX US model (MAX-7 lamp, 100-120 V): P/N 90424300
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice