Martha stewart ROY2441450LEDCMQS User Manual

Safety Information

Open the protective cover

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed, including the following:

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b.Do not use seasonal products outdoors unless marked

suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

c. This seasonal product is not intended for permanent

installation or use.

d.Do not mount or place the product near gas or electric

heaters, fireplaces, candles, or other similar sources of heat.

e.Do not secure the wiring of the product with staples or

nails, or place on sharp hooks or nails. f. Do not let lamps rest on the supply cord or on any wire. g.Unplug the product when leaving the house, when

retiring for the night, or if left unattended. h.This is an electric product and not a toy! To avoid risk of

fire, burns, personal injury and electric shock it should not

be played with or placed where small children can reach it. i. Do not use this product for other than its intended use. j. Do not hang ornaments or other objects from cord, wire,

or light string. k.Do not close doors or windows on the product or

extensions cords as this may damage the wire insulation. l. Do not cover the product with cloth, paper, or any material

that is not a part of the product when in use. m.This product has a polarized plug (one blade is wider than

the other) as a feature to reduce the risk of electric shock.

This plug will fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician. Do not use

with an extension cord unless plug can be fully inserted.

Do not alter or replace the plug. n.This product is equipped with push-in type lamps. Do not

twist lamps. o.This product employs overload protection (fuse). A blown

fuse indicates an overload or short-circuit situation. If the

fuse blows, unplug the product from the outlet. Also

unplug any additional strings or products that may be

attached to the product. Replace the fuse as per the user

servicing instructions (follow product marking for proper

fuse rating) and check the product. p.Read and follow all instructions that are on the product or provide with the product.

SAVE THESE INSTRUCTIONS

Christmas Tree

Model: ROY2441450LEDCMQS

100S

50S

100S

50S

Sku # 1000 048 865

Do Not Tamper Internal Parts

Control box

Do Not Tamper Internal Parts

To Be Plugged

Adaptor

Into Wall

Outlet

Safety Information

Package Contents

Part Description Quantity

A Tree top, tag 3 1 B Tree center, tag 2 1 C Tree bottom, tag 1 1 D Tree stand 1

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet. Step 2. Unfold the legs of the tree stand (D) and lay the stand on the floor. Step 3. Slide the locking disk of the tree stand (D) down until it snaps into place.

Assembling the tree This tree assmebles with Quick Set® technology

---Set up and light up your tree in less than 10 minutes!

Step 1.Remove the protective caps from the tree bottom (C) and insert the pole into the tree stand (D). Step 2.Remove the protective caps from the tree center (B) and insert the pole into the tree bottom (C) . Step 3.Insert the tree top (A) into the tree center (B). Step 4.Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges. Step 5.Insert the adaptor into the wall outlet. All your lights should now be lit. Step 6.When finished shaping the branches, slightly upsweep all branch tips for a uniform look.

Section 3

Section 2

Section 1