Page 1
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
H12
Page 2
Assembly Procedures:
Page 3
Step 4. Turn the assembled chair to an upright position. Attach the left arm (P5) and right arm (P6) to the
back frame (P3) as shown below. Securely tighten all bolts.
Step 5.
2). Insert wood plugs (H12) into the bolt holes, tap with rubber hammer or mallet until the wood plug edge
are even with wood surface.
Step 6. Place the back cushion (P1) to the seat (P2) and the back frame(P3) as shown. Assembly is
complete. Failure to follow these instructions may cause the bolts to misalign during assembly.
1). Screw the finial (P4) to the post top of back frame (P3) as shown below.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Loading...