Page 1
ASSEMBLY INSTRUCTIONS
Description: Tristan Dining Chair
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
H1
H2
H3
H4
H5
(H1)x1
(H2)x4
(H3)x5
(H4)x5
(H5)x1
Short Bolts Ø5/16"*2"
Long Bolts Ø5/16"*3-1/2"
Lock Washers Ø5/16
Flat Washers Ø5/16
Allen Wrench Ø5/16
Page 2
Step 2. Attach the front legs (P3) to the seat cushion (P2) as shown below.
P2
P3
Step 3. Securely tighten all bolts with Allen wrench(H5). Turn the assembled chair to an upright position, make
sure the chair is level, aligned properly. Assembly is complete. Failure to follow these instructions may cause
the bolts to misalign during assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Loading...