Page 1
Important safety instructions：
• Please read carefully all instructions bef or e as s e mbling.
Pre-assembly：
Bolts
φ1/4*3/5
Bolts
φ1/4*1-2/5
ASSEMBLY INSTRUC
Auden Accent Cha
• Do not discard any content until assembly is complete d t o avoid acci dent al ly discard ing
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
• Remove all parts and hardware from box along with any protective packaging.
Parts List
Item Description QTY
P1 Chair Top 1
P2
P3
P4 Left Support Bar 1
P5
U-shaped
Support Bar
Right Support
Bar
Middle Support
Bar
DRAWING
1
1
2
Hardware List
Item Description QTY
H1 Allen Wrench 1
H2
H3
DRAWING
12
2
Page 2
Step 1. Assemble the chair on a flat, soft surface suc h as carpet or cloth to prevent scrat
bar(P3&P4)
to the U-Shaped Support Bar(P2), Using Allen wrench(H1) to t ight e n bolt s(H
Step 2.Attach Middle Support Bar(P5) t o U-s hap ed Suppor t Bar( P2) with bolt (H3), t i ght en
wrench(H1) as illustration below.
Page 3
Step 4. Place accent chair upr ight on a level surface. Adjust levelers (as drawing) as nec
Thank you for your purchase
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL
SHOULD BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO P RE VE NT DAM
CHECK TO ENSURE THAT ALL HARDWARE IS KEPT TIGHTE
Step 3.Attach assembled U-shaped Sup port Ba r(P2 ) t o Chair Top(P1）with bolt(H2),tigh
wrench(H1) as illustration below.
H1
Page 4
Page 5
Page 6
Loading...