Martel Electronics TP-KIT Data sheet

Temperature Probes

A variety of temperature probe configura-

tions are available for use with all Martel

TP-K01 — Bead Probe

-50°C to 200°C/-58°F to +392°F Intended for general-purpose applications and difficult to reach measurements.

TP-K02 — Immersion Probe

-50°C to 700°C/-58°F to +1,292°F For measurements in liquid, air, or gels.

TP-K03 — Surface Probe

-50°C to 400°C/-58°F to +752°F For surface measurements on flat or curved surfaces.

TP-K04 — Piercing Probe

-50°C to 600°C/-58°F to +1,122°F For food service measurements of liquids and gels.

temperature meters and calibrators. All are

Type-K, and feature ±2.2°C/± 0.75% or

±3.9°F/± 0.75% accuracy.

Also available:

80029 — JKTE Thermocouple Wire Kit 80036 — RSNB Thermocouple Wire Kit TP-KIT—Probe Kit

TP-K05 — Surface Probe

-50°C to 400°C/-58°F to +752°F For surface measurements of flat or curved surfaces in hard to reach locations.

TP-K06 — Air & Gas Probe

-50°C to 800°C/-58°F to +1,504°F For measurements in air and other gases.

IBP-1 — RTD Probe

-100°C to 400°C/-212°F to 752°F PT-100 high-accuracy probe for critical calibration requirements. Supplied with Ro, A, B, and C coefficients, and a 9.5' cable with LEMO mating connector.

Martel Electronics, P.O. Box 770, Londonderry, NH 03053

Tel: 800-821-0023, E-mail: sales@martelcorp.com, Web: www.martelcorp.com

TP-KIT — Probe Kit

Contains one (1) each of TP-K01 through TP-K06 in foam-lined carrying case.