Martel Electronics T140 User Manual

Models

T140-10" H2O
T140-1 PSI

T140-200" H

2

O

T140-30 PSI
T140-100 PSI
T140-300 PSI
T140-3000 PSI

Hand-held

Pressure Calibrator

OPERATING INSTRUCTIONS

1. General Description

The T140 is designed to be an accurate, easy
to use pressure calibrator/manometer for a
variety of pressure measuring applications. Its
two port differential design allows the unit to be
used in both gage and differential measure­ments providing a high degree of versatility. The
T140 is capable of storing maximum and
minimum pressure readings along with a hold
function to freeze a reading if desired.

1.1 Customer Service

Corporate Office:

www.martelcorp.com

e-mail: [e-mail]

Tel: [phone]

Fax: [phone]

Martel Electronics

3 Corporate Park Drive

Derry, NH 03038

1.2 Installation

Remove the Packing List and verify that all
equipment has been received. If there are any
questions about the shipment, please call
Martel at 1-800-821-0023.

When you receive the shipment, inspect the
container and equipment for any signs of
damage. Note any evidence of rough handling
in transit. Immediately report any damage to the
shipping agent.

NOTE: The carrier will not honor any claims
unless all shipping material is saved for their
examination. After examining and removing
contents, save packing material and carton in
the event reshipment is necessary.

1

2

1.3 Safety information

Symbols Used

The following table lists the International
Electrical Symbols. Some or all of these
symbols may be used on the instrument or in
this manual.

Symbol Description

AC (Alternating Current)

AC-DC

Battery

CE Complies with European Union
Directives

DC

Double Insulated

Electric Shock

Fuse

PE Ground

Hot Surface (Burn Hazard)

Read the User’s Manual
(Important Information)

Off