Martel Electronics T100 Data sheet

T100 SERIES SINGLE-FUNCTION CALIBRATORS

VOLTAGE, FREQUENCY, MILLIAMP, THERMOCOUPLE & RTD

This line of calibrators is designed to give the technician excellent accuracy in a family of rugged,

easy to use instruments. The T100 Series consists of 3 Process Signal calibrators (mA, Volts,

Frequency) and 2 Temperature calibrators (T/C, RTD). Operation of these calibrators is made easy

through the use of a sealed membrane keypad with simple controls. The outputs are set through the

use of step and ramp keys which allows both large and small output changes to be made with ease.

Each unit includes test leads, carrying case, 9V battery, NIST Certificate, and instruction manual.

• High Accuracy/Source and Read Capability

• Rugged, Dust Tight, Water Resistant Case

• Easy Operation

• Powered by a Common 9 Volt Battery

SPECIFICATIONS

T100 Milliamp T110 Voltage T120 Thermocouple T130 RTD T150 Frequency

RANGES 0.00 to 24.00 mA 0.0 to 100.0 mV J: -100 to 1000°C Pt 385: -200 to 850°C 0-100.0 kHz

25.0% to 125.0% 0.00 to 10.00 V K: -100 to 1200°C Pt 392: -200 to 850°C 0-1000.0 Hz
T: -100 to 400°C Ni 120: -80 to 320°C 0-1000.0 CPM
E: -100 to 950°C JIS 392: -200 to 850°C
Selectable °C or °F Selectable °C or °F

OPERATING MODES Source, Simulate, Read or Source — — —

Read, Read/Power

RESOLUTION — — 1°C or °F 1°C or °F —

ACCURACY ±0.025% FS ±0.025% FS ±1°C above 0°C ±1°C ± 0.01% F.S.

±1 LSD ±1 LSD ±2°C below 0°C ± 1 LSD

TEMPERATURE STABILITY 0.01% F.S./°C 0.01% F.S./°C 0.01% F.S./°C ±0.01% F.S./°C 0.005% F.S./°C

LOOP POWER 24V DC — — — —

STEP SIZE 4 mA (0, 4, 8, 12, 10 mV or 1 V 100°C/100°F 100°C/100°F 10% of range

16, 20 and 24) (10 per range)

SCROLL SIZE 0.01 mA 0.1 mV or .01 V 1°C/1°F 1°C/1°F 0.1% of Range

LOAD CAPACITY 1000 Ohms Min. ± 1 mA — — 5 mA (1 Kohm

load min)

EXCITATION RANGE — — — 0.125 mA to 2 mA —

continuous DC

OUTPUT SIGNAL — — — — 5V p-p

square wave

INPUT SIGNAL — — — — 1V to 100V p-p

OPERATING TEMPERATURE 0 to 50°C

STORAGE TEMPERATURE -20 to 60°C

WEIGHT 12 oz.

SIZE 1.43 x 3.15 x 5.7 in.

ORDERING INFORMATION

T-100 Milliamp calibrator $ 499

T-110 Voltage calibrator 549

T-120 Thermocouple calibrator 549

T-130 RTD calibrator 549

T-150 Frequency calibrator 549

Information subject to change without notice. Prices in USD. V044.6