Martel Electronics MC-1000 Data sheet

High Accuracy Multi-Function Calibrator

The Martel MC-1000 Multi-Function Calibrator

MC-1000

provides the combination of a high accuracy

calibrator and common DMM functions. This single

instrument will calibrate virtually any process

device — read and source thermocouples, RTDs,

Ohms, Voltage, current, frequency, pressure — and

Features

±0.4 °C thermocouple/±0.3 °C RTD accuracy

±0.015% of reading electrical accuracy

Ten (10) T/C types and eight (8) RTD types, plus YSI 400

Read and source modes

Full function 4 to 20 mA read, source, simulate, and read/
power modes with ±0.015% of reading accuracy

Source or read 0 to 20 Volts (±0.015% of reading accuracy)

Measure 0 to 250 VDC or VAC

Direct keyboard entry enables quick output changes

Store up to nine (9) setpoints for each output function

test continuity as well. The MC-1000 is compatible

®

with 29 Fluke

the addition of a simple connector/adapter. The

MC-1000 features a simple user interface, large

display, and an RS232 interface.

700 Series pressure modules with

RTD function compatible with all pulsed transmitters

RS232 interface

Supplied in full rubber boot

Fluke® Pressure Modules

The MC-1000 is compatible 29 with Fluke 700 Series

pressure modules, available from Martel Electronics.

Please refer to the separate Pressure Modules data sheet

for ranges and model numbers. (Pressure modules require

accessory Model 700MA Module Adapter.)

Martel Electronics, P.O. Box 770, Londonderry, NH 03053

Tel: [phone], E-mail: [e-mail], Web: www.martelcorp.com

Specifications (23 °C ±5 °C unless otherwise noted)

Pressure Ranges Various ranges in 29 different pressure modules –

see separate Pressure Module data sheet

T/C Ranges J, K, T, E, R, S, N, B, L, U including – 10 to 75 mV
RTD Ranges Pt 385 (100, 200, 500, 1000 Ohms)

Pt 392, JIS, Ni120, Cu10, YSI400

Ohms Ranges 0 to 400.00 and 400.0 to 3,200.0
mA Range 0 to 24.000 mA
Voltage

(Low) Read 0-20.000 VDC
Source 0-20.000 VDC
(High) Read only 0-250 VDC or VAC

Frequency

Source Measure

CPM 2.0 - 1,000.0 0.0 - 1,000.0
Hz 0 - 1,000 0.0 - 1,000.0
kHz 1.0 -10.0 0.00 -10.00

Continuity 0 to 400.0 Ohms, audible tone when under 10 Ohms
Accuracy T/C Type J: ±0.3°C ±10 µV (±0.4°C total error)

RTD Pt 100: ±0.1°C ±.075 Ω (±0.3°C total error)
Ohms (400): ±0.1 Ω
Ohms (3,200): ±1.0 Ω

mA Compliance Up to 1,000 Ω load
Voltage Drive Capability 1 mA
RTD IEX-Range 0.01 mA to 3 mA
RTD Frequency Response 10 ms – works with all pulsed transmitters
Operating Temperature -10°C to 50°C
Storage Temperature -20°C to 70°C
Loop Power 4 AA alkaline batteries, 25 hours typical operating time
Size 7.5” x 4.0” x 1.5”
Accessories Included Test leads, 4 AA alkaline batteries,

NIST Certificate, and instruction manual

Optional Accessories Carrying Case, Model CC572

Pressure Module Adapter, Model 700MA

Need more performance and features in the field?

Try Martel’s MC-1200 Multi-Function Calibrator

Measure and source 13 T/C types, 13 RTD types,

Ohms, current, Voltage, frequency, and source pulse

trains. Calibrate transmitters with

the isolated mA/V read-back

circuit. Measure pressure with

Fluke® 700 Series pressure

modules. Drive 4-20 mA loops up

to 1000 Ohms with the built-in

24 V supply. Directly enter custom

RTD coefficients. Program

dedicated setpoints in all source

modes. Calibrate almost anything

with the highest accuracy in its

class — ±0.015% of reading!

©Copyright 2003 Martel Electronics All trademarks are the property of their respective owners. 0305R2/OEMM/

Need even more performance in a lab standard?

If your calibration needs extend to the laboratory, the

Martel M2001 Bench Calibrator provides all of the

performance, functionality, and ease of use of the

MC-1000 Multi-Function Calibrator, in a laboratory

standard. The M2001 sources and measures

thermocouples, RTDs, Ohms, pressure modules,

voltage, and current, with calibration accuracy to

±0.0025% of reading. The Martel M2001 is truly a

calibration laboratory in a box!