Martel Electronics BEZ-700-IP User Manual
BEZ 700-IP
When usedin conjunction with certain panel mounted 700 series instruments (purchased separately), this bezel offers the assembly an IP67 / NEMA 4X rating
from the front. The screw fixings allow for a quick and easy assembly of the module and bezel in the panel. A robust and attractive alloy construction gives the
product a professional finish. BEZ700-IP is ideally suited forapplications where the ingress of moisture or particles poses a problem.
IP67/NEMA 4X Rated Bezel
IP67 / NEMA 4X Rated
Screw Fixing
Glass Window
Robust Construction
Attractive Appearance
COMPATIBILITY
DPM 742-BL
DPM 750S-BL
LASCAR ELECTRONICS LTD.
MODULE HOUSE
WHITEPARISH
WILTSHIRE SP5 2SJ
UK
TEL: +44 (1794) 884567
FAX: +44 (1794) 884616
E-mail: sales@lascar.co.uk
DIMENSIONS All dimensions in mm (inches)
65.2 (2.57)
35.2 (1.39)
49.8 (1.96)
Panel Cut-out: 60.5 x 30.5mm (2.38" x 1.20")
Panel Thickness: 2mm (0.08") minimum
LASCAR ELECTRONICS INC.
3750 West 26th Street
Erie
PA 16506
USA
TEL: +1 (814) 835 0621
FAX: +1 (814) 838 8141
E-mail: us-sales@lascarelectronics.com
PO Box 770, Londonderry, NH 03053 1-800-821-0023
www.lascarelectronics.com
www.martelcorp.com
Specifications liable to change without prior warning BEZ 700-IP Issue 2 June/2002 M.C.
20.6 (0.81)
28.0 (1.10)
LASCAR ELECTRONICS (HK) LIMITED
FLAT C, 5/FL., LUCKY FTY. BLDG.
63-65 HUNG TO ROAD
KWUN TONG KOWLOON
HONG KONG
TEL: +852 2797 3219
FAX: +852 2343 6187
E-mail: b4lascar@samsongroup.com.hk
Page1of2
BEZ 700-IP
When used in conjunction with certain panel mounted 700 series instruments (purchased separately), this bezel offers the assembly an IP67 / NEMA 4X rating
from the front. The screw fixings allow for a quick and easy assembly of the module and bezel in the panel. A robust and attractive alloy construction gives the
product a professional finish. BEZ 700-IP is ideally suited forapplications where the ingress of moisture or particles poses a problem.
IP67 / NEMA 4X Rated
DIMENSIONS All dimensions in mm (inches)
IP67/NEMA 4X Rated Bezel
Screw Fixing
Glass Window
65.2 (2.57)
Robust Construction
Attractive Appearance
COMPATIBILITY
DPM 742-BL
DPM 750S-BL
LASCAR ELECTRONICS LTD.
MODULE HOUSE
WHITEPARISH
WILTSHIRE SP5 2SJ
UK
TEL: +44 (1794) 884567
FAX: +44 (1794) 884616
E-mail: sales@lascar.co.uk
35.2 (1.39)
Panel Cut-out: 60.5 x 30.5mm (2.38" x 1.20")
Panel Thickness: 2mm (0.08") minimum
LASCAR ELECTRONICS INC.
3750 West 26th Street
Erie
PA 16506
USA
TEL: +1 (814) 835 0621
FAX: +1 (814) 838 8141
E-mail: us-sales@lascarelectronics.com
49.8 (1.96)
20.6 (0.81)
28.0 (1.10)
LASCAR ELECTRONICS (HK) LIMITED
FLAT C, 5/FL., LUCKY FTY. BLDG.
63-65 HUNG TO ROAD
KWUN TONG KOWLOON
HONG KONG
TEL: +852 2797 3219
FAX: +852 2343 6187
E-mail: b4lascar@samsongroup.com.hk
PO Box 770, Londonderry, NH 03053 1-800-821-0023
www.lascarelectronics.com
www.martelcorp.com
Specifications liable to change without prior warning BEZ 700-IP Issue 2 June/2002 M.C.
Page1of2
MOUNTING METHOD
To ensure integrity of waterproofing, avoid overtightening nuts
retaining bezel clamp bracket, as this can distort the seal.
(add Silicone Grease)
Seal
Insulating
Washer
Panel
Instrument
Nut
Solder Tag
Shake-proof
Washer
2 31
Notes: On some panel instruments it may be easier to configure links and calibrate the product prior to fitting the instrument and BEZ 700-IP into the
panel. Always observe safety warnings on the Panel Instrument datasheet. Do not allow connections to touch the metal bezel, as this may adversely
affect product safety or stop the panel instrument from functioning correctly.
A solder tag is provided. However, it is the responsibility of the installer to ensure that any earth bonding complies with local regulations.
www.lascarelectronics.com
PO Box 770, Londonderry, NH 03053 1-800-821-0023
Page2of2
MOUNTING METHOD
Seal
(add Silicone Grease)
Insulating
Washer
Panel
Instrument
Nut
To ensure integrity of waterproofing, avoid overtightening nuts
retaining bezel clamp bracket, as this can distort the seal.
Solder Tag
Shake-proof
Washer
2 31
Notes: On some panel instruments it may be easier to configure links and calibrate the product prior to fitting the instrument and BEZ 700-IP into the
panel. Always observe safety warnings on the Panel Instrument datasheet. Do not allow connections to touch the metal bezel, as this may adversely
affect product safety or stop the panel instrument from functioning correctly.
A solder tag is provided. However, it is the responsibility of the installer to ensure that any earth bonding complies with local regulations.
www.lascarelectronics.com
PO Box 770, Londonderry, NH 03053 1-800-821-0023
Page2of2
Loading...