Martel Electronics BetaGauge PIR Pro Specifications
BetaGauge PIR Reference Class
Digital Test Gauge
Features:
• The most accurate digital test guage available
with accuracy of ±0.04% of reading ±0.01% F. S.
• Temperature compensated accuracy over
0 to 50 °C
• Standard available pressure ranges — 30 PSI
Compound (C/V), 30 psi, 100 psi, 500 psi, 1000
psi, 3000 psi, 5,000 psi, 10,000 psi
• Displays in 20 standard or 1 custom
engineering unit
• Displays ambient temperature in °C or °F
• Large, back-lit, 5-1/2 digit display with 0.65" high
digits and 20 segment bar graph
• Rugged Zinc Aluminum Alloy High Pressure Cast
Housing
• MIN/MAX recall
• Adjustable TARE zeros large system offsets
• User-configurable sample rate maximizes
measurement
performance and battery life
• User-configurable damping smooths readings
from pulsating/plant air sources
• Auto Shut-off for extended battery life
• Low battery indicator
• CSA intrinsically safe, Class 1, Div. 2 Groups A,
B, C & D; ATEX approved; CE approved
• Available with optional 24 V external power input
• Rubber boot standard on all stand-alone bottom
mount gauges
The Reference Class BetaGauge PIR PRO digital
test gauges are available in six ranges — 30 psi
Compound, 30 psig, 100 psig, 500 psig, 1,000 psig,
3,000 psig, 5,000 psig, and 10,000 psig. Setup of the
BetaGauge PIR PRO is fast and straightforward,
through a menu-driven display, with minimal text and
intuitive functions, that is simple enough to allow the
gauge to be used anywhere in the world without the
need for multilingual displays. Pressure readings are
displayed in any one of 18 standard engineering
units, or in user-defined custom units, eliminating
tedious conversion calculations. Readings are
displayed on a 5-1/2 digit, 0.65” high digital display
and companion percent-of-range bar graph. Accuracy
is temperature-compensated over a 0 to +50
°C
range. The internal temperature sensor measurement
can be displayed in degrees Celsius or Fahrenheit.
As with the original high accuracy BetaGauge P.I.
PRO gauges, the BetaGauge PIR PRO takes the
concept of a simple analog Test Gauge and
combines it with the accuracy of digital technology.
The new Reference Class gauges provide
exceptional performance with 0.04% of reading
accuracy, especially when operated below 50% of
their range.
© Copyright 2007-2010 Martel Electronics Corporation
All trademarks are the property of their respective owners.
100128R1/OEMM
Martel Electronics Corporation
3 Corporate Drive
Unit 1
Derry, NH 03038 USA
Tel: +1 603-434-1433
Toll-free: 800-821-0023
Email: sales@martelcalibrators.com
Web: www.martelcalibrators.com
Specifications (0 °C to +50 °C, unless otherwise noted)
Mechanical
Dimensions
4.375" x 5.0" x 1.50"
Input Port
1/4" male NPT
Display
5 Digits, 0.65" (16.53 mm) height
Bar Graph – 0 to 100% in 20 segments
Power
Battery
three (3), size AA alkaline batteries
Battery Life
1,500 hours without backlight;
2,000 hours at slow sample rate;
battery life can be displayed on bar graph to
indicate the amount of time left
Low Battery Indicator
displayed icon near the end of battery life
Includes: manual, batteries
Input Ranges
30 PSI Compound (C/V), 30 psi, 100 psi, 500 psi,
1000 psi, 3000 psi, 5000 psi, 10,000 psi
Accuracy
±0.04% of reading, ±0.01% FS
Vacuum accuracy of the compound range is 0.1% of the
30 psi full scale. Vacuum measurement not calibrated
for other ranges.
Temperature Compensation
0 °C to +50 °C (32 °F to +122 °F) to rated accuracy
Standard Engineering Units
PSI, Bar, Kg/cm2, inH2O (4 °C, 20 °C or 60 °F),
ft H2O (4 °C, 20 °C or 60 °F), mmH2O, cmH2O (4 °C and
20 °C), mH2O (4 °C and 20 °C), Kpa, mBAR, inHg,
mmHg, TORR
Media Compatibility
liquids and gases compatible with 316 stainless
steel; 30 C/V range non-corrosive gases and liquids
Environmental
Operating Temperature
-10 °C to +55 °C
Storage
-20 °C to +70 °C (-4 °F to +158 °F)
Order #
Loading...