Martel Electronics BetaGauge PI Pro Specifications

Calibration Technology Starts Here

Precision Digital Pressure Test Gauge The BetaGauge PI PRO

Digital Test Gauge takes the concept of an analog Test Gauge, and brings

Single-handed

it to a new level. The NEW BetaGauge P. I. PRO combines the accuracy of

digital technology with the simplicity of an analog gauge and achieves performance,

ease-of- use, and a feature set unmatched in the pressure measurement world.

process

The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new

validation

BetaGauge P. I. PRO Digital Pressure Test Gauge apart, just as you’ve come to expect from Martel Electronics!

purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the

environmental integrity of the gauge in a lighter and smaller yet more rugged form factor.

Setup of the BetaGauge P. I. PRO is fast and straightforward, through a menu-driven display, that is simple enough to allow the gauge to be used anywhere in the world. Ease-of-use, performance, and features set the

The BetaGauge P. I. PRO first and foremost, provides 0.05% of full scale accuracy

of pressure in any one of seventeen (17) ranges. Readings may be displayed in

any one of 18 standard engineering units, or in 1 custom unit you define, to

eliminate tedious conversion calculations.

The 5-1/2 digit, 0.65" high digital display and companion percent-of-

range bar graph provide an easy to read display, even from a distance. A

number of features provide additional ease of use. The reading sample

rate can be user adjusted to match the type of measurement required. A

power saving mode maximizes battery life to 2,000 hours. Other features

include MIN/MAX function, Auto Power Off and backlight control.

Continued on back

General Features

Accuracy of ±0.05% of F. S. (± 0.04% of Reading for Reference Class Verse)

Temperature compensated accuracy over 0 to 50 °C

17 standard pressure ranges available

BetaGauge PI PRO

(Shown with

optional pump)

Data logging

Displays in 18 standard or 1 custom engineering unit

Displays ambient temperature in °C or °F

Large, back-lit, 5-1/2 digit display with 0.65" high digits and 20 segment bar graph

Adjustable TARE zeros large system offsets

User-conﬁgurable sample rate maximizes measurement performance and battery life

User-conﬁgurable damping smooths readings from pulsating/plant air sources

Auto Shut-off for extended battery life

Low battery indicator

CSA intrinsically safe, Class 1, Div. 2 Groups A, B, C & D; ATEX approved; CE approved

Available with optional 24 V external power input

Rubber boot standard on all stand-alone bottom mount gauges

For more information:

- Call us toll free at 800-821-0023 or 603-434-1433

Fax us at 603-434-1653

- Email us at sales@martelcorp.com and ask for a BetaGauge PI Data Sheet

- Or go to our website,

www.martelcalibrators.com and click on BetaGauge PI PRO

- Online product comparison

Specifications

Input Pressure Ranges

10” H20*/20 mBAR; 1 psi*/70 mBAR; 15 psi/1 BAR, 30 psi/2 BAR; 100 psi/7 BAR; 300 psi/20 BAR; 500 psi/30 BAR;

,000 psi/70 BAR; 2,000 psi/140 BAR; 3,000 psi/200 BAR;

1 5,000 psi/300 BAR; 10,000 psi/700 BAR; 15,000 psi/1035 BAR;

-15 to +15 psi*; -15 to +30 psi*

Absolute Ranges

15 psia, 30 psia, 100 psia, 300 psia

Accuracy

±0.05 % FS positive pressure ±0.1 % FS for 1.0 psi

Temperature Compensation

0 °C to +50 °C (32 °F to +122 °F) to rated accuracy

Standard Engineering Units

PSI, Bar, Kg/cm2, inH2O (4 °C, 20 °C or 60 °F), ft H2O (4 °C, 20 °C or 60 °F), cmH2O (4 °C and 20 °C), mH2O (4 °C and 20 °C), Kpa, mBAR, inHg, mmHg, TORR

Media Compatibility

liquids and gases compatible with 316 stainless steel; except for ranges marked * above

Environmental

Operating Temperature -10 °C to +55 °C Storage -20 °C to +70 °C (-4 °F to +158 °F)

Mechanical

Dimensions 4.375" x 5.0" x 1.50" Input Port 1/4" male NPT

Display

5 Digits, 0.65" (16.53 mm) height Bar Graph 0 to 100% in 20 segments

Power

Battery three (3), size AA alkaline batteries Battery Life 1,500 hours without backlight;

Low Battery Indicator displayed icon near the end of

Includes: manual, batteries

MECP500 kit

Pump Kits shown with optional BetaGauge PI PRO Digital Test Gauge.

0 °C to 50 °C, unless otherwise noted)

(

2,000 hours at slow sample rate; battery life can be displayed on bar graph to indicate the amount of time left

battery life

MECP10K kit

BetaGauge PI PRO

Continued from front

Password-protected ﬁeld calibration of the BetaGauge P. I. PRO may be initiated through the keypad. An RS232 port allows pressure reading data to be extracted directly from the gauge for off-line analysis. (Requires Martel RS232 cable (P/N C232SJ).) In addition to a ZERO function that compensates for sensor drift, large residual system pressures can be nulled using the TARE adjustment. This adjustment, when combined with the

bility to create custom engineering units for display, allows the BetaGauge

a P.I. PRO to be used in a variety of liquid level and volume measurements, easily reading units of interest, such as gallons in a tank, directly. Damping can be set to integrate readings to accommodate pulsating sources, such as plant air. An optional external 24 VDC power input is available for applications where the BetaGauge P. I. PRO will be permanently incorporated into a process line. A protective rubber boot is standard to help protect the BetaGauge P. I. from damage when dropped. The BetaGauge P. I. PRO is available in a self-contained calibration kit, including a hand pressure pump, and associated ﬁttings.

As with the original high accuracy BetaGauge P.I. PRO gauges, the BetaGauge PIR PRO takes the concept of a simple analog Test Gauge and combines it with the accuracy of digital technology. The new Reference Class gauges provide exceptional performance with ±0.04% of reading accuracy, especially when operated below 50% of their range.

The Reference Class BetaGauge PIR PRO digital test gauges are available in six ranges — 30 psi Compound, 30 psig, 100 psig, 500 psig, 1,000 psig, 3,000 psig, 5,000 psig, and 10,000 psig. Setup of the BetaGauge PIR PRO is fast and straightforward, through a menu-driven display, with minimal text and intuitive functions, that is simple enough to allow the gauge to be used anywhere in the world without the need for multilingual displays. Pressure readings are displayed in any one of 18 standard engineering units, or in user- defined custom units, eliminating tedious conversion calculations. Readings are displayed on a 5-1/2 digit, 0.65” high digital display and companion percent-of-range bar graph. Accuracy is temperature-compensated over a 0 to +50 °C range. The internal temperature sensor measurement can be displayed in degrees Celsius or Fahrenheit.

Order #

BetaGauge-PI

-xxx 10” H20*/20 mBAR, xxx = 010; 1 psi*/70 mBAR, xxx=001;

15.000 psi/1 BAR, xxx = 015; 30.000 psi/2 BAR, xxx = 030;

100.00 psi/7 BAR, xxx = 100; 300.00 psi/20 BAR, xxx = 300;

500.00 psi/30 BAR, xxx = 500; 1,000.00 psi/70 BAR, xxx = 01K; 2,000.0 psi/140 BAR, xxx = 02K; 3,000.0 psi/200 BAR, xxx = 03K; 5,000.0 psi/300 BAR, xxx = 05K; 10,000 psi/700 BAR, xxx = 10K; 15,000 psi/1035 BAR, xxx = 15K (Q4 2010); -15 to +15 psi*, xxx=015C;

-15 to +30 psi*, xxx=030C

-x Port Position Bottom (standard); x = __ (leave blank); Back (option); x = RM

-Kitx Kit (includes BetaGauge PI, case, rubber boot, pressure calibration hand

pump, hose and ﬁttings)

With MECP500 pneumatic test pump (500 psi and below); Kit5

With MECP10K hydraulic test pump (above 500 psi); Kit3

-24 OPTIONAL: External 24 VDC Power Input ATTENTION: All Rear Mount and 24 VDC External Input gauge configurations are supplied in the previous BetaGauge PI housing. Only the standard bottom mount configured gauges are supplied in the new BetaGauge PI PRO housing.

BetaGauge

PIR PRO

Reference Class

Martel Electronics Corporation Distributed by:

3 Corporate Park Drive, Unit 1 Derry, NH 03038 Phone: +1 (603) 434-1433 Fax: +1 (603) 434-1653 Copyright 2008 Martel Electronics; All trademarks are the property of their respective owners. 0807R1CD-PI