Marshall Electronics
Model No. VSW-1000
Presentation Switcher
(HDMI/DVI/VGA/Composite/Component Input & HDMI Output)
Broadcast A/V Division
Operating Instructions
V.1.0
VSW-1000 / IntroductIon
Table of Contents
1. Introduction
2. Features
The VSW-1000 Presentation Switcher offers the highest compatibility among composite,
component, DVI, VGA, HDMI and S-Video to CVBS, VGA (Optional) & HDMI in the market. This
unique device supports analog and digital conversion and scaling. With the embedded advanced
deinterlacer for interlaced video inputs, such as component, composite and S-Video, can be further
improved. VSW-1000 supports the insertion of stereo analog audio and S/PDIF inputs into HDMI
output. With this advanced feature, users can combine asynchronous video and audio sources into
the state-of-art HDMI compliant A/V signal for further long range lossless transmission and high
standard A/V experience!
The VSW-1000 is designed to ease format conversion among the available video formats to
common VGA, CVBS and HDMI outputs. With the VSW-1000, bothersome video format issues will
not create bottlenecks in your applications and the handy audio support can make input video and
audio HDMI ready. With IR remote control and push button controls, the VSW-1000 offers easy
conversion, routing and scaling of videos as needed.
2 3
1. Introduction ..................................................................... 3
2. Features ........................................................................... 3
3. Package Contents ........................................................... 3
4. Specifications .................................................................. 4
5. Connection Diagram ....................................................... 5
6. Panel Descriptions .......................................................... 6
7. IR Remote Control ........................................................... 7
8. OSD Menu ....................................................................... 8
9. Software Procedures ....................................................... 9
10. Warranty ........................................................................ 11
www.LCDracks.com
IMPORTANT SAFETY INSTRUCTIONS:
•Follow all instructions and warnings marked on this unit.
•Do not attempt to service this unit yourself, except where explained in this manual.
•Provide proper ventilation and air circulation and do not use near water.
•Keep objects that might damage the device and assure that the placement of this unit is on a stable
surface.
•Use only the power adapter and power cords and connection cables designed for this unit.
•Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
The VSW-1000 Presentation Switcher has been tested for conformance to safety
regulations and requirements, and has been certied for international use. However like
all electronic equipments, the VSW-1000 should be used with care. Please read and
follow instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
• Supports IR remote control
• Software control through RS-232 control port
• Supports OSD control interface
• Input Video bandwidth HDMI: 225MHz; DVI/ VGA: 165MHz; Component: 74.25MHz
• S/PDIF & Stereo input supported
• Deinterlacing
• Supports noise reduction and video enhancement features (only for HDMI output)
• Over / Under scan adjustment (only for HDMI output)
• Video H/V mirror (only for HDMI output)
• Active video area adjustment
• RS-232rmware
• Output scalable up to 4K (2K supported)
• 8-CH audio down-mix to 2-CH
• Multiple video formats supported
3. Package Contents
1. 1x Case VSW-1000 and 1x 5V/2A
2. 1x IR receiver
3. 1x IR remote
4. 1x Installation software CD
5. 1x User Manual
6. 2x Rack Mount Ears
4 5
Marshall Electronics
4. Specifi cations
www.LCDracks.com
VSW-1000 / connectIon dIaGraM
Model Name VSW-1000 / Video Switcher
Input Video Bandwidth HDMI:225 MHz
DVI/VGA:165 MHz
Component: 74.25MHz
Output Video Bandwidth 297MHz
Audio Support HDMI: bypass to HDMI output/ SPDIF output/ stereo output
SPDIF: bypass to HDMI output or SPDIF output
Stereo: bypass to HDMI output or stereo output
ESD Protection [1] Human body model - ±19kV [air-gap discharge]
& ±12kV [contact discharge]
[2] Core chipset - ±2kV
PCB stack-up 4-layer board [impedance control - differential 100W; single 50W
Firmware Update Feasible via RS232 Port
CEC Channel ByPass
Input TMDS Signal 1.2 Volts [peak-to-peak]
Input DDC Signal 5 Volts [peak-to-peak, TTL]
Input 2xYPbPr&L-R + 2xS-Video + 2xCVBS&L-R +
1x VGA + 1xDVI + 1xStereo + 1xSPDIF + 4xHDMI
Output 2x HDMI + 1xVGA(Optional) + 1xCVBS + 2xRCA
Y,Pb,Pr 3xRCA(Video) + 2xRCA(Audio) [female]
S-Video 9 pin S-Video [female]
CVBS 1xRCA (Video) + 2xRCA (Audio) [female]
VGA connector HD-15 [15-pin D-sub female]
HDMI connector HDMI [19-pin female]
RS-232 connector 9-Pin D-sub female
Mechanical
Housing Metal enclosure
Dimensions [L x W x H] 17.25”W × 1.8“H × 4.8”D
Weight 3.6 lb (1.64 kg)
Power Supply 5V 2A DC
Power Consumption 10W
Operating Temperature 0~40°C [32~104°F]
Storage Temperature -20~60°C [-4~140°F]
Relative Humidity 20~90% RH [no condensation]
5. Connection Diagram
Monitor
LaptopSet-top box 1
Set-top box 2
Camera
PC
Game Console
HDMI Game ConsoleBlu-ray Player Media Player
Loading...