Bias Adjustment
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit
Product Overview
Features
Electrical Specifications
Mechanical Specifications
Digital Screen Formats and Frame Rates
Operational Setup
Connectors
Switch Settings, Adjustments and Indicators
Pixel to Pixel Function
Menu Functions
Warranty
1
2
3
4
5
6
7
8
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
www.LCDRacks.com
Email: sales@lcdracks.com
V-R82DP-HDSDI
V-R82DP-HDSDI
Users Guide
Users Guide
Marshall Electronics warranties to the first consumer, that this V-R82DP-HDSDI Dual 8.4-inch LCD rack mounted monitor set will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with
a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction,
voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the
duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing
area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
11
Warranty
8
Switch Settings, Adjustments and Indicators
Dry Erase Label
Power On/Off switch
Illuminates red when
system power is
present
Illuminates Green
when monitor is ON
Note: Tapping any active
input signal toggles BLUE
GUN On/Off. Signal selection
is active when Blue Gun is
on. Tap active selection to
turn off.
Pixel to Pixel On/Off
Lights when active
Blue Gun, On/Off
Lights when active
Screen aspect ratio switch 4:3 or 16:9 selector and indicators
4:3 Aspect 16:9 Aspect
9
10
Input 1: 525i/60Hz 4x3
Tally Indicators
Illuminate when active
Image Adjustment Controls
Note: Tint only functions when NTSC
Video or S-Video are selected
As the native LCD display is 800 pixels wide by 600 pixels high, it is necessary to change the size of the image to fill the whole screen. Pixel to Pixel mode bypasses
the enlargement or scaling function and displays the native incoming format.
For 625/525- based images, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect) display.
For 720P/1080i/1080P based images, pixel to pixel will appear as an enlargement displaying the center 800x600 pixel grouping.
Turn On/Off with Menu button.
Use Up (P-P), Dn (Blue), and Select (Ratio) for menu navigation functions.
Color Temperature – Select D65 or User. User mode will automatically be turned on if Gain or Bias are adjusted.
Adj Color Gain – Select to adjust RGB gains. Adj Color Bias – Select to adjust RGB bias
OSD – Toggle OSD on/off. Version Number – Display only
Gain Adjustment
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit
Chart legend: Left Line = Increase of gain
Center Line = D65 (Default)
Right Line = Decrease of gain
Chart legend: Right Line = Increase of Bias
Center Line = D65 (Default)
Left Line = Decrease of Bias
OSD Adjustment
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to toggle OSD On/Off
9
Pixel to Pixel Function
11
10
Menu Functions
• TFT-MegaPixel ™ totally digital end to end signal processing
• One HDSDI/SDI (SMPTE259M/292M) (ITR-U601) input per screen
• Reclocked HDSDI/SDI output of on screen video
• ColorMatch Conversion™ D65 and SMPTE/EBU color space emulation of CRT
• User control for gain and bias of Red, Green, and Blue colors
• HyperProcess™ motion interpolation of interlace images
• On screen display of input status, formats, and menu functions
• Pixel to Pixel native resolution display
• Ready to mount – all brackets are factory installed
• Lightweight – 75% lighter than CRT models
• Direct access for screen adjustments and selections.
• Settings memory restores active state with power off/on cycle
• Easy to use front panel selection of inputs
• Blue Gun for adjustment to SMPTE color bars
• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications
• Unique 180 degree tilt adjustment
• Dry erase label for each screen
1
Product Overview
The Rack mounted and tiltable V-R82DP-HDSDI represents leading edge technology in LCD imaging for broadcast and
professional video applications featuring High Resolution, 1.44 megapixel, TFT screens with completely digital signal processing. All video formats are scaled to fi t on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel
interpolations with precision Gamma correction.
2
Features
All signal types and frame rates are automatically detected
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)
• 720 x 486P (Progressive 30P)
• 720 x 576P (Progressive 25P)
• 720 x 1280 – 23.97P, 24P, 25P, 50P, 59.94P, 60P (Progressive)
• 1035 x 1920 - 59.94i, 60i (Interlaced)
• 1080 x 1920 – 50i, 59.94i, 60i / 23.973Psf, 24Psf, 25Psf, 29.97Psf, 30Psf
Psf=Progressive or Segmented Frame formats
V-PS12-5V-1
Universal power supply
(U.L. class 2)
3
Electrical Specifications
Number of Screens 2
Screen Aspect 4:3 / 16:9 switchable from front panel
Display (Viewing Area) 8.4 Inch diagonal (170.4mm W x 127.8mm H)
Viewing Angles
160 with protective screen and treatment (130 H x 120 V native)
Resolution (RGB Dots) 800H×RGBx600V (1.44 million pixels)
Dot Pitch .213mm square pixel
Contrast Ratio 500:1
Pixel Response 10ms rise / 25ms fall
Brightness (in cd/m²) 500 cd/m²
Backlight Field Replaceable CCFL (50,000 hour half life)
LCD Screen Treatments Anti Reflection, Anti Glare, Hard Coat
Estimated MTBF 5 years of 24/7/365 operation
System NTSC / PAL auto recognition
Inputs per display HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
Active Outputs 1 HDSDI/SDI per screen (BNC)
Color temperature
D65 (6500 Kelvin)
Color Gamut SMPTE-C/EBU
Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required 10.4 to 16.8 VDC
Power Consumption Approx. 30 watt nominal
Operating temperature
32 F to 120 F (0 C to 50 C)
Storage temperature
-4 F to 120 F (-20 C to 50 C)
Compliance
Œ, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEE / Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
3
2
V-R82DP-HDSDI
V-R82DP-HDSDI
Users Guide
Users Guide
Marshall Electronics
Dimensions 19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)
V-R102DP-HDSDI Weight 5.5 lbs (2.4 kg)
V-PS12-5V-1 Power Supply Weight 1 lbs (0.45kg)
4
Mechanical Specifications
6
Operational Setup
1. Unpack the V-R82DP-HDSDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If
you are not located within the continental united states call +1 310-333-0606.
2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is require d
when installed to prevent possible damage to the V-R82DP-HDSDI internal components.
3. Connect required cables for signal input and output. Please note that power must be applied to the V-R82DP-HDSDI for all
outputs to be activated. All BNC connectors should be rated for 75Ω.
4. Plug the V-PS12-5V-1 power supply into the A.C. source
5. Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.
6. Turn on the V-R82DP-HDSDI by depressing the power switch located on the front of the unit.
7
Connectors
* Tally lamps active when connected to ground
Monitor 2
HDSDI In
Channel 1 and 2
12 VDC from
V-PS12-5V-1 power
supply
Left Pin - Pos
Right Pin- Neg
Pin1-M2Yel
Pin2-M2Red
Pin3-M2Grn
Pin4-
Pin5-Gnd
Pin6Pin7Pin8-
Pin9Pin10Pin11-M1Yel
Pin12-M1Red
Pin13-M1Grn
Pin14Pin15-Gnd
Tally IN
DB-15 Female
5
Digital Screen Formats and Frame Rates
Monitor 1
HDSDI In
Channel 1 and 2
Loading...