Marshall Electronics V-R82DP-2SDI User Manual

V-R82DP-2SDI

Users Guide

7

Version 2009-0512

Switch Settings, Adjustments and Indicators

Tally Indicators

Illuminate when active

Input 1: NTSC 525 4x3

Note: Tapping any active
input signal toggles BLUE
GUN On/Off. Signal selection
is active when Blue Gun is
on. Tap active selection to
turn off.

Dry Erase Label

Power On/Off switch

Illuminates red

when system power is present

Illuminates Green

when monitor is ON

SDI signal selector switches

Illuminates when active. Signal

format will be displayed via OSD

Pixel to Pixel On/Off

Lights when active

Blue Gun, On/Off

Lights when active

8

Pixel to Pixel Function (Under scan)

As the native LCD display is 800 pixels wide by 600 pixels high, it is necessary to change the size of the image to fill the whole screen. Pixel to Pixel mode bypasses
the enlargement or scaling function and displays the native incoming format.
For 525-NTSC based images, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect) display.
For 625-PAL based images, pixel to pixel will appear as a 576x640 (4:3 aspect) or 576x720 (16:9 aspect) display.

Screen aspect ratio switch 4:3 or 16:9 selector and indicators

4:3 Aspect 16:9 Aspect

Image Adjustment Controls

Note: Tint only functions when NTSC

Video or S-Video are selected

Marshall Electronics

1910 East Maple Ave.

El Segundo, CA 90245

Tel.: [phone] • 310-333-0606

Fax: [phone]

www.LCDRacks.com

Email: [e-mail]

V-R82DP-2SDI

Users Guide

9

Menu Functions

Turn On/Off with Menu button.
Use Up (P-P), Dn (Blue), and Select (Ratio) for menu navigation functions.

Color Temperature – Select D65 or User. User mode will automatically be turned on if Gain or Bias are adjusted.
Adj Color Gain – Select to adjust RGB gains. Adj Color Bias – Select to adjust RGB bias
OSD – Toggle OSD on/off. Version Number – Display only

Gain Adjustment

Press Up (P-P), Dn (B lue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit

Bias Adjustment

Press Up (P-P), Dn (B lue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit

OSD Adjustment

Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to toggle OSD On/Off

10

Warranty

Marshall Electronics warranties to the first consumer, that this V-R82DP-2SDI Dual 8.4-inch LCD rack mounted monitor set will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided
with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construc­tion, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to
extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active view­ing area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.

Due to constant effort to improve products and product features, specifications may change without notice.

Chart legend: Left Line = Increase of gain
Center Line = D65 (Default)
Right Line = Decrease of gain

Chart legend: Right Line = Increase of Bias
Center Line = D65 (Default)
Left Line = Decrease of Bias

Product Overview

Features

Electrical Specifications

Mechanical Specifications

Operational Setup

Connectors

Switch Settings, Adjustments and Indicators

Pixel to Pixel Function (under scan)

Menu Functions

Warranty

1

2

3

4

5

6

7

8

9

10

1

V-R82DP-2SDI

Users Guide

Product Overview

4

Mechanical Specifications

The Rack mounted and tiltable V-R82DP-2SDI represents leading edge technology in LCD imaging for broadcast
and professional video applications featuring High Resolution, 1.44 megapixel, TFT screens with completely digi­tal signal processing. All video formats are scaled to fi t on screen in the highest resolution using a state of the art
LSI that incorporates 4x4 pixel interpolations with precision Gamma correction.

2

Features

• TFT-MegaPixel ™ totally digital end to end signal processing

• 2 SDI (SMPTE259M) (ITR-U601) inputs per screen

• Switched SDI output of on screen video is reclocked

• ColorMatch Conversion™ D65 and SMPTE/EBU color space emulation of CRT

• User control for gain and bias of Red, Green, and Blue colors

• HyperProcess™ motion interpolation of interlace images

• On screen display of input status, formats, and menu functions

• Pixel to Pixel native resolution display

• Ready to mount – all brackets are factory installed

• Lightweight – 75% lighter than CRT models

• Direct access for screen adjustments and selections.

• Settings memory restores active state with power off/on cycle

• Easy to use front panel selection of inputs

• Blue Gun for adjustment to SMPTE color bars

• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)

• Three LEDs (Red, Green, Amber) produce 7 different tally indications

• Unique 180 degree tilt adjustment

• Dry erase label for each screen

V-PS12-5V-1

Universal power supply

(U.L. class 2)

Dimensions 19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)
V-R102DP-HDSDI Weight 5.5 lbs (2.4 kg)
V-PS12-5V-1 Power Supply Weight 1 lbs (0.45kg)

5

Operational Setup

1. Unpack the V-R82DP-2SDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If
you are not located within the continental united states call [phone].

2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required
when installed to prevent possible damage to the V-R82DP-2SDI internal components.

3. Connect required cables for signal input and output.
Please note that power must be applied to the V-R82DP-2SDI for all outputs to be activated.
All BNC connectors should be rated for 75Ω.

4. Plug the V-PS12-5V-1 power supply into the A.C. source

5. Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.

6. Turn on the V-R82DP-2SDI by depressing the power switch located on the front of the unit.

3

Electrical Specifications

Number of Screens 2
Screen Aspect 4:3 / 16:9 switchable from front panel
Display (Viewing Area) 8.4 Inch diagonal (170.4mm w x 127.8mm h)
Viewing Angles

160  with protective screen and treatment (130  H x 120  V native)

Resolution (RGB Dots) 800H×RGBx600V (1.44 million pixels)
Dot Pitch .213mm square pixel
Contrast Ratio 500:1
Pixel Response 10ms rise / 25ms fall
Brightness (in cd/m²) 500 cd/m²
Backlight CCFL (Cold Cathode Fluorescent Lamp)
LCD Screen Treatments Anti Reflection, Anti Glare, Hard Coat

Video Format Standard definition only

System NTSC / PAL auto recognition
Inputs per display 2 SDI (SMPTE259M) (ITR-U601) per screen (BNC)
Active Outputs 1 SDI of on screen video (BNC)
Color temperature

D65 (6500  Kelvin)

Color Gamut SMPTE-C/EBU
Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required 10.4 to 16.8 VDC
Power Consumption Approx. 30 watt nominal
Operating temperature
Storage temperature
Compliance
RoHS WEE / Environmental

32  F to 120  F (0  C to 50  C)

-4  F to 120  F (-20  C to 50  C)
Œ, FCC-Class A, ANSI-63.4 (Certificates on file)
Do not dispose. Return to Manufacturer or Authorized Recycle Facility

6

Connectors

* Tally lamps active when connected to ground

Monitor 2

SDI In

Channel 1 and 2

Monitor 1

SDI In

Channel 1 and 2

Tally IN

DB-15 Female

Pin1-M1Grn
Pin2-M1Red
Pin3-M1Yel
Pin4-Gnd
Pin5-Gnd
Pin6­Pin7­Pin8-

12 VDC from

V-PS12-5V-1 power

supply

Left Pin - Pos

Right Pin- Neg

Pin9 -Gnd
Pin10-Gnd
Pin11-M2Grn
Pin12-M2Red
Pin13-M2Yel
Pin14-Gnd
Pin15-Gnd

V-R82DP-2SDI

2

Users Guide

Marshall Electronics

3