Marshall Electronics
Tel.: 800-800-6608 • 310-333-0606
Email: sales@lcdracks.com
V-R104DP-HD Users Guide
1910 East Maple Ave.
El Segundo, CA 90245
Fax: 310-333-0688
www.LCDRacks.com
Product Overview
Features
Video - Screen Formats and Frame Rates
Electrical Specifications
Mechanical Specifications
Operational Setup
Connectors
Faceplate Cleaning
Optional Accessories
Switch Settings, Adjustments and Indicators
Menu Functions
Warranty
1
2
3
4
5
6
7
8
9
10
11
12
1
Product Overview
The V-R104DP-HD features our Completely Digital TFT-Megapixel™ high denition TFT/LCD system with 1.44 million pixels.
Analog signals are digitized using an advanced 10 bit process with 4x over sampling and adaptive 5 line comb lter plus exacting
color space conversion. Video is scaled to t on screen in the highest resolution using a state of the art LSI that incorporates 6x6 pixel
adaptive motion interpolation with precision Gamma correction. Additional features include Pixel-to-Pixel™ native resolution scaling,
setup memory, Underscan, H/V Delay, adjustable color temperature, and Blue Gun.
2
Features
• TFT-MegaPixel™ totally digital
• Multiple format acceptance for virtually any analog video signal
• Display PC Signals to XGA 1024x768
• ColorMatch Conversion™ with SMPTE/EBU color space emulation of CRT
• Color temperature preset for D65
• HyperProcess™ motion interpolation of interlace images
• On screen display of input status, formats, and menu functions
• Pixel to Pixel™ native resolution display
• Ready to mount – all brackets are factory installed
• Lightweight – 75% lighter than CRT models
• Settings memory restores active state with power off/on cycle
• Underscan plus H & V delay
• Blue only (Blue Gun) for adjustment to SMPTE color bars
• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications on each screen
• Dry erase label for each screen
3
Video - Screen Formats and Frame Rates
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)
• 480P (Progressive)
• 576P (Progressive)
• 720P-50P, 59.94P, 60P, 25P, 29.97P, 30P, 50P, 59.94P, 60P (Progressive)
• 1035i - 59.94i, 60i (Interlaced)
• 1080i x 1920 – 50i, 59.94i, 60i, 23.973P, 24P, 25P, 29.97P, 30P, 24psf, 23.97psf
4
Electrical Specifications
Screen Aspect 4:3/16:9 switchable
Display (Viewing Area) 10.4 Inch diagonal (211.2mm w x 158.4mm h)
Viewing Angles 130° H x 120° V
Resolution (RGB Dots) 800H×RGBx600V (1.44 million pixels)
Color Depth 262,000 Colors (6-Bit)
Dot Pitch .213mm square pixel
Contrast Ratio 350:1
Pixel Response 10ms rise/25ms fall
Brightness (in cd/m²) 500 cd/m²
Backlight Field Replaceable CCFL (50,000 hour half life)
LCD Screen Treatments Anti Reflection, Anti Glare, Hardcoat
Estimated MTBF 5 years of 24/7/365 operation
System NTSC/PAL with auto recognition
Inputs HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
YPrPb Component (3 BNC)
Composite Video PAL/NTSC auto detect (BNC)
S-Video (Y/C) (4 Pin Mini Din female)
XGA 15Pin HD-15 Female
DVI 27 (Pin DVI-I Female)
Active Outputs HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
Color temperature D65 and User Adjustment
Color Gamut SMPTE-C/EBU 80% CIE
Luma Linearity Typical +/- 3% with 5 IRE increments (0 to 10 IRE)
Power Required 10.8 to 13.2 VDC
Power Consumption Approx. 40 watt nominal
Operating temperature
Storage temperature
Compliance
RoHS WEE / Environmental
2
Tally (HD-15 Female)
YPrPb Component (3 BNC)
Composite Video PAL/NTSC auto detect
32° F to 120° F (0° C to 50° C)
-4 F to 120° F (-20° C to 50° C)
₠, FCC-Class A, ANSI-63.4 (Certificates on file)
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
V-R104DP-HD Users Guide
All signal types and frame rates are automatically detected
VGA/XGA Connector
PIN#
SIGNAL
PIN#
SIGNAL
1
RED 9 NC
2
GREEN
10
NC
3
BLUE
11
NC
4
NC
12
NC
5
GND
13
HSYNC
6
RED SHIELD
14
VSYNC
7
GREEN SHIELD
15
NC
8
BLUE SHIELD
DVI-I Connector
Pin#
Signal
Pin#
Signal
1
T.M.D.S DATA 2-
16
HOT PLUG DETECT
2
T.M.D.S DATA 2+
17
T.M.D.S DATA 0-
3
T.M.D.S DATA 2/4
SHIELD
18
T.M.D.S DATA 0+
4
T.M.D.S DATA 4-
19
T.M.D.S DATA 0/5
SHIELD
5
T.M.D.S DATA 4+
20
T.M.D.S DATA 5-
6
DDC CLOCK
21
T.M.D.S DATA 5+
7
DDC DATA
22
T.M.D.S CLOCK
SHIELD
8
ANALOG VERT. SYNC
23
T.M.D.S CLOCK+
9
T.M.D.S DATA 1-
24
T.M.D.S CLOCK-
10
T.M.D.S DATA 1+
11
T.M.D.S DATA 1/3
SHIELD
C1
ANALOG RED
12
T.M.D.S DATA 3-
C2
ANALOG GREEN
13
T.M.D.S DATA 3+
C3
ANALOG BLUE
14
+5V POWER
C4
ANALOG HORZ SYNC
15
GND
C5
ANALOG GROUND
5
Mechanical Specifications
Dimensions 19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)
V-R104DP-HD Weight 5.5 lbs (2.4 kg)
V-PS12-5V-XLR Power Supply Weight 1 lbs (0.45kg)
6
Operational Setup
1. Unpack the V-R104DP-HD and accompanying V-PS12-5V-XLR power supply. Physically inspect for any damage that may have
occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608.
If you are not located within the continental United States call +1 310-333-0606.
2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required when
installed to prevent possible damage to the V-R104DP-HD internal components.
3. Connect required cables for signal input and output. Please note that power must be applied to the V-R104DP-HD for all outputs
tobeactivated.AllBNCconnectorsshouldberatedfor75Ω.
4. Plug the
5. Attach twist lock power connection from
V-PS12-5V-XLR power supply into the A.C. source
V-PS12-5V-XLR power supply to the back of the unit.
6. Turn on each of the V-R104DP-HD screens by depressing the power switch located on the front of the unit for each screen.
Connectors
7
* HDSDI/SDI Inputs comply to SMPTE - 259M, 292M, SDI - 270Mbs, HDSDI - 1.485Gb/s
* Component Inputs comply to SMPTE274M, 294M,295M,296M
* Composite Video Inputs comply to SMPTE-170M
* Tally lamps active when connected to ground
S-Video Out
4 Pin Din (Female)
Pin1 - GND
Pin2 - GND
Pin3 - Yout
Pin4 - Cout
S-Video In
4 Pin Din (Female)
Pin1 - GND
Pin2 - GND
Pin3 - Yin
Pin4 - Cin
12 VDC from
V-PS12-5V-XLR
power supply
Tally IN
DB-15 Female
Pin1-Yellow
Pin2-Red
Pin3-Green
Pin4-
Pin5-Gnd
Pin6Pin7-
Active Outputs require power to be applied
All input signals appear as output signal
Analog output signals are buffered and amplied
Marshall Electronics
Marshall Electronics
3
Loading...