V-MD1012
Dual 10.1” Rack Mount Monitor with Modular Input / Output
User Manual
V-MD1012
Table of Contents
1. Introduction, Installation and Setup ......................................................................................................... 3
2. Product Overview & Features ................................................................................................................. 4
3. Dimensions ............................................................................................................................................ 8
4. Navigation Menu .................................................................................................................................... 9
4.1 Scaling Configuration Submenu ................................................................................................... 9
4.2 Color Configuration Submenu .................................................................................................... 11
4.3 Markers Configuration Submenu ................................................................................................ 13
4.4 Filter Configuration Submenu ..................................................................................................... 14
4.5 Audio Configuration Submenu .................................................................................................... 17
4.6 Signal Analysis Configuration Submenu ..................................................................................... 17
4.7 User Settings Configuration Submenu ....................................................................................... 18
4.8 System Configuration Submenu ................................................................................................. 19
5. Monitor Care ........................................................................................................................................ 21
6. Warranty ............................................................................................................................................... 21
IMPORTANT SAFETY INSTRUCTIONS:
The V-MD1012 Dual Monitor with HDMI I/O and MD Slots has been tes ted for conf ormance to safet y
regulations and req uirements, and has been c ertified for international us e. However, like all el ectronic
equipment, this unit should be used with care. Pleas e read and follo w the safety instructi ons to protect
yourself from possible injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circ ul ati on and do not use near water .
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
2 User Manual v1.0
V-MD1012
1. Introduction, Installation and Setup
Introduction
The V-MD1012 is a dual 10.1” rack mount monitor with modular slots and HDMI I/O. This monitor offers a high resolution 1920 x
1200 LED backlit panel. Standard features include markers, 4 user-configurable front panel function buttons, RGB gain and bias
control.
Installation
This monitor can be mounted with any standard 19” equipment rack. The attached rack ears can be angled to provide the user
control over the viewing ang le. Adequate ventilat ion is required w hen installed to prevent po ssible damage to the monitor’s internal
components.
Package Contents
Carefully unpack the V-MD1012 monitor and verify that the following items are included:
• 1x - V-MD1012 Dual 10.1” Monitor
• 1x – 12V Power Supply
Connections, Power-On and Initial Setup
Plug the power supply into an AC power source (100-240 V @ 50/60 Hz ). Attac h the p ow er conne ctor t o t he b ac k of th e moni tor .
Connect the required cables for video signal input and output. (Power must be applied to the V-MD1012 to activate the loopthough output.) The monitor de faults to ‘ON ’ when power is su pplied. Video is automatically detected a nd displayed on the screen.
3 User Manual v1.0
V-MD1012
2. Product Overview & Feat ures
Top and Front Panel Features
1. Power Button
The Power Button will turn the Display ON and OFF. The LED button will dim when the power is ON. The LED is at full power in
the OFF state.
2. Input Select Button
Use the Input Select Button to select between the On-Board HDMI Input or the Module Input (when available).
3. User-Definable Function Buttons
Four user-definable fun ction button s can be us ed for direct access to various settings. Functions are assigned using the onscreen
menu or by highlighting a function and selecting that function button.
4. Menu Navigation Buttons
Use the Menu, ↑, ↓, and Select buttons to display and navigate the on-screen menu. See MAIN MENU AND NAVIGATION for
details on using the Menu.
5. Image Adjustment Knobs
Use the Image Adjustment Knobs to adjust image color saturation, brightness and contrast. The status of each adjustme nt is
shown on the bottom left screen, with values ranging from 0 to 100. Pressing a knob once displays the current value. Pressing a
knob twice resets the value to the default settings.
6. User Control Knob
The User Control Knob can be customized to control multiple functions. Functions can be changed in the main menu.
7. Stereo Headphone Jack
The 1/8” Headphone Jack can receive two channels of embedded HDMI or SDI Audio and will provide an Audio Signal.
4 User Manual v1.0
V-MD1012
Rear Panel Features
1. Power Connector
Insert the included Power Supply Coax Cable. Optional DC sources supplying the appropriate voltage can be used as well.
2. HDMI Input and Output
The V-MD1012 has 2 HDMI Inputs and 2 Active Loop-Through Outputs. The HDMI Output is HDCP Compliant and will NOT
pass through HDCP protected content.
3. Module Slot
Use the Module Slot to install any of the compatible MD Series Modules. This functions as a second video input or output.
4. Upgrade Port
Use for upgrade / debugging purposes ONLY. Please contact Marshall Electronics before attempting to use this port.
5 User Manual v1.0
V-MD1012
Model Name
V-MD1012
Description
Dual 10.1” Rack Monitor
Panel
• Screen Size: Dual 10.1” Diagonal
• Viewing Angle: 85/85/85/85 (R/L/U/D)
Power Consumption
• Power Input: 12VDC
• No Reverse Polarity Protection
Loop-Through
• Yes
Cable Lengths
• SDI 300m/ HD 200m/ 3G 100m
Thermal Operating and Storage Temperature
• Operating Temp: 10C – 40C
• Storage Temp: 0C – 40C
Dimensions
• Vertical Hole Spacing: Pass (3RU)
• Rack Opening: Pass (17.7”)
Tally Pinout
1 Screen
• Pin 14 – Ground
Module and Format Compatibility
MD-3GE (Modular)
Specifications
• Backlight Feature: WLED
• Resolution: 1920x1200
• Contrast Ratio: 800:1
• Luminance: 800 cd/m2
• Contrast Ratio: 800:1
• Display Colors: 16.7M (8-Bit)
• Signal Interface: 8-Bit
• Wattage: 30W
• No Over Voltage Protection
• Horizontal Spacing: Pass (18.31”)
• Pin 1– Green
• Pin 2 – Red
• Pin 3 – Yellow
• Pin 4 – Ground
• Pin 5 – No Contact
Screen 2
• Pin 11 – Green
• Pin 12 – Red
• Pin 13 – Yellow
• 480i 59.94Hz
• 576i 50Hz
• 720p 25Hz
• 720p 29.97Hz
• 720p 30Hz
• 720p 50Hz
• 720p 59.94Hz
• 720p 60Hz
• 1080psf 23.98Hz
• 1080psf 24Hz
• 1080p 23.98Hz
• 1080p 24z
• 1080p 29.97Hz
• 1080i 50Hz
• 1080i 60Hz
• 3G – Level A 1080p 50Hz
• 3G – Level A 1080p 59.94Hz
• 3G – Level A 1080p 60Hz
6 User Manual v1.0
MDO-3G (Modular)
• 720p 50Hz
• 3G – Level A 1080p 60Hz
• 720p 59.94Hz
• 720p 60Hz
• 1080p 23.98Hz
• 1080p 24Hz
• 1080p 25Hz
• 1080p 29.97Hz
• 1080p 30Hz
• 1080i 50Hz
• 1080i 59.94Hz
• 1080i 60Hz
• 3G – Level A 1080p 50Hz
• 3G – Level A 1080p 59.94Hz
• 3G – Level A 1080p 60Hz
*MDO-3G module output is converted from HDMI input. HDCP protected will not be looped through.
HDMI Input (Board)
• 480p 59.94Hz
• 576p 50Hz
• 720p 25Hz
• 720p 29.97Hz
• 720p 30Hz
• 720p 50Hz
• 720p 59.94Hz
• 720p 60Hz
• 1080psf 23.98Hz
• 1080psf 24Hz
• 1080p 23.98Hz
• 1080p 24Hz
• 1080p 25Hz
• 1080p 29.97Hz
• 1080p 30Hz
• 1080i 50Hz
• 3G – Level A 1080p 50Hz
• 3G – Level A 1080p 59.94Hz
V-MD1012
7 User Manual v1.0
Loading...