Marshall Electronics V-LCD651STX-HDI-JM, V-LCD651STX-3GSDI-AB User manual

Marshall Electronics

Model No. V-LCD651STX-HDA

Model No.V-LCD651STX-HDI

Model No.V-LCD651STX-3GSDI

6.5” High Resolution Super Transflective Field Monitor

Operating Instructions

2

Product Overview.................................................................................................................................................................. 4

Features ................................................................................................................................................................................. 4

Installation and Initial Setup ................................................................................................................................................5

Front and Side Monitor Features......................................................................................................................................... 6

Rear Monitor Features .......................................................................................................................................................... 7

Compatible Input Formats.................................................................................................................................................... 8

On Screen Menu .................................................................................................................................................................... 9

MAIN MENU AND NAVIGATION .........................................................................................................................................10

VIDEO CONFIGURATION SUBMENU ............................................................................................................................ 10

MARKER CONFIGURATION SUBMENU ....................................................................................................................... 14

FILTER CONFIGURATION SUBMENU...............................................................

SYSTEM CONFIGURATION SUBMENU ........................................................................................................................ 18

FUNCTION PRESETS SUBMENU .................................................................................................................................. 19

SYSTEM INFORMATION SUBMENU ............................................................................................................................. 20

Specifications ...................................................................................................................................................................... 21

Dimensions .......................................................................................................................................................................... 22

Maintenance......................................................................................................................................................................... 23

Warranty............................................................................................................................................................................... 23

............................................................ 17

3

Product Overview

The V-LCD651STX monitor series is a 6.5” high-definition Super Transflective LCD series of monitors featuring our
completely digital TFT-MegaPixel active matrix LCD platform. With built-in focus assist and false color filters, this monitor
is ideal as a light-weight high resolution viewfinder or focus-assist monitor. Our proprietary digital signal processing
features 10-bit A/D conversion of all analog signals, with 4X over-sampling and 5-line super-adaptive 2D comb filtering of
composite signals. De-interlacing is performed using our HyperProcess algorithm with motion adaptive interpolation. Multi­format compatibility accommodates virtually all video formats including NTSC/PAL, 480i/p, 720p, 1080i/p. The HDMI
model in the series (V-LCD651STX-HDI) accepts digital HDMI video as well as standard VESA formats. The 3G-SDI
model in the series (V-LCD651STX-3GSDI) acts as a triple-rate SDI input accepting SDI, HD-SDI and 3G-SDI input
formats. Adjustable color temperature enables the most precise color representation possible. Advanced features
include aspect ratio settings, a variety of screen markers, underscan mode, blue-only mode, monochrome mode, H/V
delay, User Pixel-to-Pixel mode, and HDMI Input Format selection(HDMI model only).

Features

■

igh-Resolution 6.5” Panel

H

The V-LCD651STX-HDA features an all-digital TFT­MegaPixel active matrix LCD system with 2.4 million
pixels. The LCD panel features a brightness of 650
cd/m2 and a contrast ratio of 500:1 making the display
ideal in a variety of environments and lighting
conditions.

■

Super Transflective

The V-LCD651STX-HDA can be used in locations
with high intensity ambient light. This monitor
performs very well in sunlight, or indoors under direct
studio lighting.

■

Multi-Format Compatibility

The V-LCD651STX accommodates many video
standards with Composite Video and YPbPr inputs.
Accepted formats include NTSC/PAL, 480i/p, 576i/p,
720p and1080i. The HDMI version of the V­LCD651STX accepts digital video inputs and
standard VESA formats. The 3G-SDI version
includes a triple-rate SDI input, accepting SDI, HD­SDI and 3G-SDI inputs up to 1080p60.

■

End-to-End Digital Signal Processing

Analog input signals are digitized using an advanced
10-bit process with 4x over-sampling, 5-line super­adaptive 2D comb filtering and exacting color space
conversion. Video is scaled to fit on the screen in the
highest possible resolution using a state-of-the-art
LSI that incorporates precision gamma correction and
our HyperProcess motion adaptive interpolation for
interlaced images.

■

Focus-Assist, False Color Filter, and other

Advanced Features

Focus-Assist, False Color filter, Aspect ratio settings,
underscan mode, blue-only mode, monochrome
mode, and H/V delay are a few of the advanced
features which make the V-LCD651STX at home in

4

any broadcast environment. Pixel-to-Pixel mode also
allows native display of any incoming image format.

■

Flexible Screen Markers

A variety of screen markers in 4:3, 16:9, and full
screen modes allow accurate monitoring of the
different aspect ratios used in broadcast
environments. You also have the option of creating
your own screen markers with the User option.

■

User-Definable Function Buttons

Four user-definable function buttons on the front­panel allow quick access to numerous settings and
features including focus-assist, false color filter,
aspect ratio, screen markers, monochrome mode,
color temperature, delay mode, and more.

■

User-Interchangeable Battery Adapters

Several battery adapter options accommodate a wide
variety of professional batteries and camcorder batteries

Installation and Initial Setup

■

Carefully unpack the V-LCD651STX monitor and verify that the following items are included:

• V-LCD651STX Monitor

• V-PS12-5V-XLR Power Supply with 4-Pin Female XLR Connector

• Operating Instructions

Unpacking

Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,
immediately call Marshall Electronics Customer Service at [phone]. If you are not located within the continental
United States, call [phone].

5

Front and Side Monitor Features

Power Button

Use the power button to toggle between ON and
STANDBY modes. In the STANDBY state, the LED
on the button will illuminate bright green. In the ON
state, the LED will dimly illuminate green.

Input Select Button

Use the Input button to select VIDEO, YPbPr, and
HDMI inputs. Each press of the button will cycle the
input in order. Video standards and formats
(NTSC/PAL, etc.) are automatically detected.

User-Definable Function Buttons

Four user-definable function buttons can be used for
direct access to various settings. Functions are
assigned using the on-screen menu.

Menu Navigation Buttons

Use the Menu, ▲, ▼, and Select buttons to display
and navigate the on-screen menu.

Image Adjustment Knobs

Use the image adjustment knobs to adjust
brightness, color saturation, and contrast of the
image. The status of each image adjustment
parameter is shown on the bottom left of the screen,
with values ranging from 0 to 100. Default value is

50. Tint will adjust the hue of Composite inputs only.

Power Switch

Use the hard power switch to supply power to the
monitor, and choose the input from which the
monitor draws power. The upper switch position
uses the battery adapter, the lower switch position
uses the XLR input, and the center position is OFF.
Battery life can be preserved by setting this switch to
the OFF position when the monitor is not in use.

Service Connector

This connector is for upgrading of the V­LCD651STX monitor. Please contact Marshall
Electronics for more information.

6

Rear Monitor Features

Component and Composite Input and Output

The V-LCD651STX has HD component (YPbPr),
composite as well as active loop-through outputs for
each analog input. See page 8 for supported video
formats. The BNC inputs are internally terminated
with 75 ohms.

Module Slot

This area is intended for the Marshall Electronics
modules, which are factory installed.

HDMI connector on
th

e V-LCD651STX-

HDMI model.

.

3G-SDI connector on
the V-LCD651STX­3GSDI model.

Power Input

Connect 12VDC to the 4-Pin XLR power input
connector. Power can be supplied from the included
power supply, or from a variety of DC sources
supplying at least 1 Amp at 12 Volts.

IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:

Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC

Battery Adapter

The V-LCD651STX-HDI can be powered from a
variety of batteries. Several user-interchangeable
battery adapters are available. See page 18 for
available adapters.

¼-20 Mounting Hole

Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices

7

Compatible Input Formats

The following standards are supported by the V-LCD651STX monitors:

Composite (CVBS)

NTSC, PAL

Component (YPbPr)

480i60, 576i50

7
720p ( 60 / 59.94 / 50)
1080p (30, 29.97, 25, 24, 24 sF, 23.98, 23.98 sF)

1080i (60 / 59.94 / 50) ,

HDMI and 3GSDI Inputs

V-LCD651STX-3GSDI – V-LCD651STX monitor with Triple-Rate SDI Input / Output

1080i (60 / 59.94 / 50)

V-LCD651STX-HDI – V-LCD651STX monitor with HDMI Input

20p (30, 29.97, 25)

SD-SDI –
480i 59.94, 576i 50
HD-SDI –
720p (60 / 59.94 / 50 / 30 / 29.97 / 25)

1080p (30 / 29.97/ 25 / 24 / 24sF/ 23.98 / 23.98sF)

3G-SDI – YCbCr (4:2:2) 10 Bit – Level A and B
1080p (60 / 59.94 / 50)

YCbCr/RGB (4:4:4) 10 Bit – Level A and B
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 29.97sF / 25 / 25sF / 24 / 24sF / 23.98 / 23.98sF)

HDMI Video–
720p (60 / 59.94 / 50 / 30 / 29.97 / 25)

1080i (60 / 59.94 / 50)

1080p (30 / 29.97/ 25 / 24 / 24sF/ 23.98 / 23.98sF)
1080p (60 / 59.94 / 50)

VESA –
640 x 480 (60 Hz / 72 Hz / 75 Hz)

800 x 600 (56 Hz / 60 Hz / 72 Hz / 75 Hz)
1024 x 768 (60 Hz / 70 Hz / 75 Hz)
1280 x 1024 (60 Hz / 75 Hz)

8

On Screen Menu

Video Configuration

Marker Configuration

RGB Bias and Gain
Check Field
Ratio
Pixel-to-Pixel
H/V Delay *
Underscan *
NTSC Black Level **
Markers

Center Marker

16:9 Markers

R, G, B Bias (0-100) / R, G, B Gain (0-100)
Off, Mono, Blue, Green, Red
4:3, 16:9
Off, Centered, User
Off, H & V Delay, V Delay, H Delay
Off, On

7.5 IRE
Off, On

Off, On

Off, 4:3, 13:9, 14:9, 1.85:1, 2.35:1, 95% Safe,
93% Safe, 90%Safe, 88% Safe, 85% Safe, 80%
Safe, User

Filter Configuration

Main Menu

System Configuration

Function Presets

System Information

* HDMI model only
** Disabled when using HDMI
*** Level Sensor Accessory needed.

4:3 Markers

Marker Background

False Colors

Peaking Filter

Mosquito Filter
Input Format OSD
Curtrain Color
Splash Screen
Freeze Input
Manufacturer Default
HDMI Color Space*
HDMI Aspect Ratio*

Function on F1

Function on F2

Function on F3

Function on F4

System

Keypad

Module

Accessory

Off, 95% Safe, 93% Safe, 90% Safe, 88% Safe,
85% Safe, 80% Safe, User

0%, 25%, 50%, 75%, 100%

Off, On

Off, On

Off, On

5 sec, Off, On

Blue, Green, Black

On, Off

On, Off

Select

Auto, YCbCr, RGB

Manual, Auto

R

atio, Check Field, Level Sensor***, Mosquito
Filter, Peaking Filter, False Colors, Freeze Input,
Aspect Markers, Center Marker, Marker Enable,
Underscan, H/V Delay, Pixel-to-Pixel

Ratio, Check Field, Level Sensor***, Mosquito
Filter, Peaking Filter, False Colors, Freeze Input,
Aspect Markers, Center Marker, Marker Enable,
Underscan, H/V Delay, Pixel-to-Pixel

Ratio, Check Field, Level Sensor***, Mosquito
Filter, Peaking Filter, False Colors, Freeze Input,
Aspect Markers, Center Marker, Marker Enable,
Underscan, H/V Delay, Pixel-to-Pixel

Ratio, Check Field, Level Sensor***, Mosquito
Filter, Peaking Filter, False Colors, Freeze Input,
Aspect Markers, Center Marker, Marker Enable,
Underscan, H/V Delay, Pixel-to-Pixel

vx.xx

vx.xx

vx.xx

x.xx

v

9

RGB Bias and Gain

MAIN MENU AND NAVIGATION

Access the main menu by pushing and holding the MENU button on the front panel of the monitor.

•Step through menu items using the ▲ and ▼ buttons.

•Choose a submenu or select a menu item by pressing SELECT.

•Return to the previous menu by pressing MENU.

•Exit the main menu by pressing MENU. The menu will automatically time out after 15 seconds.

Main Menu

VIDEO CONFIGURATION SUBMENU

■

B Bias and Gain

RG

Select this submenu to fine-tune the monitor’s color balance (R, G, B). This should only be done by someone
experienced with video engineering, as this will alter the overall color shading of the screen. The purpose is to allow
color matching to other types of monitors and/or displays. Note: The Color Temperature preset will automatically
switch to USER when Color Bias settings are adjusted. It is normal for color bias adjustments to be very subtle.

When selecting the RGB Bias and Gain submenu, gain adjustment indicators will appear at the top of the screen, and
bias adjustment indicators will appear at the bottom of the screen:

Video Configuration Submenu

10

Use the ▲ and ▼ buttons to select each individual bias or gain control. Press SELECT to begin adjusting the control. Use
the ▲ and ▼ buttons to increase or decrease the value.

Alternately, the image adjustment knobs (Brightness, Color, Tint, Contrast) can be used to easily adjust the bias and gain
settings as shown below. The knobs affect whichever row of controls (gain or bias) is currently selected.

■

Che

ck Field

RED GREEN BLUE ALL

Use the check field modes for monitor calibration or to analyze individual color components of an image. In
Monochrome mode, all color is disabled and only a grayscale image is shown. In Blue, Green, and Red check field
modes, only the selected color will be shown.

Use the following procedure when calibrating the monitor to SMPTE color bars with the following procedure:

1. Allow the monitor to warm up for at least 5-10 minutes.

2. Display SMPTE split-field color bars on the monitor using an external source.

3. Enable Monochrome mode.

4. Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the Brightness knob until
there is no visible difference between the super black and black bars, but the gray bar is still visible.

5. Adjust the Contrast knob until an even grayscale appears along the top bars.

6. Disable Monochrome mode.

7. Enable Blue Check Field mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness.

8. Composite NTSC only: Adjust the Tint knob until the third bar from the left (cyan) and the third bar from the right (magenta) appear to
match in brightness.

9. Disable Blue Check Field mode.

■

pect Ratio Settings

As

Use to switch between 4:3 and 16:9 aspect ratios.

As the V-LCD651STX-HDA monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are
automatically scaled to fit the screen:

• In 4:3 mode, images are scaled to fill the entire 4:3 screen (1024x 768). With a 16:9 source, image will be
stretched vertical to fill the screen.

• In 16:9 mode, images are scaled to a 16:9 portion of the screen (1024 x 576), with a black letter-box added top
and bottom.

11

Full Screen

16:9 Mode

Note: The aspect ratio setting is ignored when Pixel-to-Pixel mode is enabled.

■

Pixel-to-Pixel Mode

Use this setting to enable Pixel-to-Pixel mode. You have the option of viewing the center 1024 x 768 (Centered Pixel­to-Pixel mode) or selecting any 1024 x 768 area on the screen (User Pixel-to-Pixel mode). The User Pixel-to-Pixel
option is not available when the incoming image is 1024 x 768 or lower - only the Centered Pixel-to-Pixel mode can be
used in this case.

This Pixel-to-Pixel mode bypasses the monitor’s internal scaling function and displays incoming images in their native
resolution and aspect ratio, with a one-to-one mapping:

• For incoming formats smaller than the native resolution of the LCD panel (1024 x 768), the image will be
displayed in the center of the screen using only the necessary LCD pixels. For example, NTSC images will
occupy exactly 720 x 480 pixels. The surrounding pixels will be black.

• For incoming formats exceeding 1024 x 768 pixels, only the center 1024 x 768 of the incoming image will
displayed occupying the whole screen, with the remainder of the picture cropped. For example, 1080i formats will
both be cropped to 1024 x 768 and displayed full-screen.

Note: Pixel-to-Pixel mode disables aspect ratio control and H/V Delay.

The User Pixel-to-Pixel mode is enabled in the following way:

1. Toggle to the User option in the Pixel-to-Pixel section of the Video Configuration Menu. Press Select.

2. Using the BRIGHT and CONTRAST knobs, select the portion of the image you would like to view with scaling

turned off. The BRIGHT knob will move your selected area left and right, and the CONTRAST knob will move
your selected area up and down.

3. Press the BRIGHT or CONTRAST knob to confirm your selection. The selected portion of the screen will

utomatically fill the display area.

a

12

■

H/V Delay

Use this setting to enable one of three delay modes (H & V Delay, V Delay, H Delay):

• In H & V Delay mode, both horizontal sync and vertical sync are delayed, resulting in both horizontal and vertical
blanking periods being shown on the screen.

• In V Delay mode, vertical sync is delayed so that the vertical blanking period is displayed on screen.

• In H Delay mode, horizontal sync is delayed so that the horizontal blanking period is displayed on the screen.

■

Underscan

Use this setting to enable or disable Underscan mode:

• When Underscan is OFF, the active portion of the video signal is displayed on the screen, with 0% overscan.

• When Underscan is ON, the image size is slightly reduced. This allows the user to clearly view the edges of the
active video area.

■

NTSC Black Level

Set the NTSC Black Level according to the type of NTSC composite video input:

• 7.5 IRE: Use this setting for standard NTSC-M signals which use a 7.5 IRE setup (black level).

• 0 IRE: Use this setting for NTSC-J signals which have no setup, or a black level of 0 IRE.

Note: This setting is disabled for PAL composite input and all component/HDMI formats.

13

MARKER CONFIGURATION SUBMENU

■

Markers

Use this setting to enable or disable all on-screen markers. This setting affects the center marker, full screen markers,
16:9 markers and 4:3 markers.

■

Center Marker

Use this setting to display a center marker on the screen.

■

:9 Markers

16

Use these settings to superimpose one of 12 markers on the screen when in Full Screen mode or 16:9 mode.

• 4:3

• 13:9

• 14:9

• 1.85:1

• 2.35:1

• 95% Safe

• 93% Safe

• 90%Safe

• 88% Safe

• 85% Safe

• 80% Safe

Marker Configuration Submenu

• User

16:9 Marker Examples:

OFF (No Marker)

2.35:1 Aspect Ratio

4:3 Aspect Ratio Marker

9

0% Safe Area

14

■

4:3 Markers

Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the
aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.

• 95% Safe Area

• 93% Safe Area

• 90% Safe Area

• 88% Safe Area

• 85% Safe Area

• 80% Safe Area

4:3 Marker Examples:

OFF (No Marker)

90% Safe Area

User Markers

User markers enable the user to create their own safe areas on the screen.

. Choose the User option for your selected aspect ratio (4:3 or 16:9) in the Marker Configuration submenu and

1
press the SELECT button. You may also begin with an already predefined safe area (95%, 93%, 90%, etc.) and
make your adjustments from there by highlighting a particular safe area and pressing the SELECT button.

2. Use the BRIGHT, COLOR, TINT and CONTRAST knobs to move the LEFT, RIGHT, TOP and BOTTOM
borders of the safe area to your desired position. When you have reached the desired location for the borders,
press the MENU button. If you began the marker adjustment using one of the predefined safe areas and made
an adjustment, the marker selection will automatically convert to the User marker setting.

15

■

Marker Background

Use this setting to choose how selected markers are displayed on the screen. :

• 0% The marker is superimposed on the complete image.

• 25% Image area beyond the marker is shown at 25% intensity.

• 50% Image area beyond the marker is shown at 50% intensity.

• 75% Image area beyond the marker is shown at 75% intensity.

• 100% Image area beyond the marker is shown at 100% intensity (black).

Example (80% Marker in 4:3 Mode):

Normal Background Black Background

16

FILTER CONFIGURATION SUBMENU

■

False Colors

The V-LCD651STX has a false color filter to aid in the setting of camera exposure. As the camera Iris is adjusted,
elements of the image will change color based on the luminance or brightness values. This enables proper exposure to
be achieved without the use of costly, complicated external equipment. To best utilize this feature, you must
understand the color chart below and have a basic understanding of camera exposure. Normally, when shooting
subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The
false color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the
IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Over
exposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show
as DEEP-BLUE to DARK–BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is
used to indicate elements of the image that are approximately 45 IRE. This represents a ‘neutral’ or ‘mid-level’
exposure commonly used for objects (not people).

False Color Key

17

■

Peaking Filter (Focus assist)

The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, all
color will be removed from the display and a black-and-white image will remain. The internal processor will display
RED color on the screen where sharp edges appear. When the camera operator adjusts (racks) the focus control (on
the camera lens), different parts of the image will have RED colored edges. This indicates that the portion of the image
is sharp – or in focus. Final focus is achieved by racking the camera lens focus control back and forth until the desired
portion of the image has RED colored edges. Please note that this feature is most effective when the subject is
properly exposed and contains enough contrast to be processed.

■

quito Filter

Mos

Use this setting to filter out “Mosquito Noise” – an artifact that appears as specs around edges of objects. This artifact
is the result of video that has been compressed at some point. Video sources from DVD-Players, PDA’s, Digital Cable
Boxes, Camcorders, etc. often have this artifact.

SYSTEM CONFIGURATION SUBMENU

System Configuration Submenu

■

Input Format OSD

Use this option to enable on-screen display of input/format status in the upper-left corner of the screen.

■

Curtain Color

Use this option to change the curtain color on the monitor. This curtain color is what you see when there is no signal
input to the monitor.

■

Splash Screen

Use this option to enable or disable the Marshall Electronics Inc. splash screen seen when the monitor is first powered
on.

■

Freeze Input

se the Freeze function to “freeze” the current image on the screen. Select this menu item again (Unfreeze) to return

U
to the real-time video input.

■

Manufacturer Default

Select this menu item to reset all adjustments and menu settings to the factory default configuration.

18

■

HDMI Color Space (V-LCD651STX-HDI Model Only)

Use this setting to automatically detect (Auto) or select the color space (RGB or YCrCb) of incoming HDMI video. This

should match the color space of the video output settings on your playback device. Note that this option is disabled when
viewing VESA (Computer) formats.

■

HDMI Aspect Ratio (V-LCD651STX-HDI Model Only)

Use this setting to automatically detect (Auto) the proper Aspect Ratio settings of incoming HDMI video. Most HD

signals will display in the 16:9 aspect ratio. SD signals (480P/576P) will display in the 4:3 aspect ratio.

FUNCTION PRESETS SUBMENU

■

User-Definable Function Buttons

Use the Function on F1, F2, F3 and F4 menu items to define each function button on the front panel of the monitor.
The following options are available for each button:

• Ratio

• Check Field

• Level Sensor*

• Mosquito Filter

• Peaking Filter

• False Colors

• Freeze Input

• Aspect Markers

• Center Marker

• Markers

• Underscan

• H/V Delay

• Pixel-to-Pixel

• Level Sensor: Requires the Level Sensor accessory. Contact Marshall Electronics for more information.

19

SYSTEM INFORMATION SUBMENU

■

System

This shows the System firmware version of your monitor.

■

Keypad

This shows the Keypad firmware version of your monitor.

■

Module

This shows your module version (HDMI or 3GSDI) and the firmware version of your module.

20

Specifications

■

PANEL

Screen Size 6.5” Diagonal
Display Area (h x v) 132.10 x 99.07 mm
Aspect Ratio 4:3 (16:9 / 4:3 Selectable)
Pixels 1024 x 768
Color Depth 18-bit (262,114 Colors)
Viewing Angle (h x v) 160° x 140° (CR >10)
Brightness 650 cd/m
Contrast Ratio 500:1
Dot Pitch (h x v) 0.043 x 0.129 mm
Pixel Pitch (h x v) 0.129 x 0.129 mm

■

VIDEO INPUT/OUTPUT

Video Input / Output
Supports SMPTE 170M, NTSC/PAL

YPBPR Input / Output
Supports SMPTE 260M, 274M, 296M

HDMI Input
HDMI 1.2, VESA Graphics Modes

■

CONNECTORS

Video Input

Video 1 x BNC Female (75 Ω)
YP

3 x BNC Female (75 Ω)

BPR

HDMI Input

HDMI 1 x HDMI (Type A) Female

Video Output (Active Loop-Through)

Video 1 x BNC Female (75 Ω)
YPBPR 3 x BNC Female (75 Ω)

Power Input

4-Pin Male XLR

Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC

.

2

■

E

LECTRICAL

Power Consumption 1.25 Amp (Max) @ 12VDC (16W Max)
Voltage Requirement 12VDC (7VDC-20VDC)
V-PS12-5V-XLR Power Supply:
Input 100V-240V, 1.5A, 50-60Hz
Output 12VDC, 5A, 60W Max

■

ATTERY ADAPTER

B

Field-Interchangeable Battery Adapter Options
(Sold Separately):

Marshall
Adapter

CM Canon 7.4 V Canon BP-970G

PM Panasonic 7.2 V Panasonic CGA-D54

JM JVC 7.2 V JVC BN-V438U

SB Sony BP 14.4 V Sony BP-460

SM Sony NP-Q 7.2 V Sony NP-QM91

SL Sony NP-F 7.2 V Sony NP-F970

Factory Configured Battery Adapter Options:

Marshall

Adapter

IDX V-Mount 14.4 V IDX E7S

AB Anton Bauer 14.4 V Anton Bauer Hytron 50

■

MECHANICAL

Dimensions (w x h x d): 6.96” x 6.03” x 1.95”

Additional Mounting: ¼”-20 Mounting Bracket

Weight (Monitor Only): 1.55 lbs
Operating Temperature 32° F to 122° F (0° C to 50° C)
Storage Temperature -4° F to158° F (-20° C to 70° C)

RoHs Do not dispose. Return to

Battery

Type

Battery

Type

Battery
Voltage

Battery
Voltage

Recommended

Battery

Recommended

Battery

Manufacturer or Authorized
Recycle Facility

21

Dimensions

22

Maintenance

■

Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro­fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the
screen to avoid damaging the LCD.

■

ceplate Dusting

Fa

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

Warranty

Marshall Electronics warranties to the first consumer that this V-LCD651STX series LCD monitor will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year from
the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or

construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the
periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel

failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any
other person is authorized to make any warranties other than those described above, or to extend the duration of any
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve
products and product features, specifications may change without notice.

23

2010-0512

Marshall Electronics, Inc.

1910 East Maple Ave.

l Segundo, CA 90245

Tel: [phone] • Fax: [phone]

www.LCDRacks.com

E

• [e-mail]

24