Broadcast A/V Division
V-LCD173HR
___________________________________________________________________________________
17.3” Professional LCD Rack Mount / Desktop Monitor
USER MANUAL
V-LCD173HR Manual
Marshall V-LCD173HR 2
Table of Contents
1. Introduction, Installation, and Setup.......................................................................................……………..…….....3
2. Panel Features................................................................................. .......................................…………..………....3
3. Navigation Main Menu……………………………….........................................……….……………..........................5
3.1 Main Menu……………….…………………………………………………..……………...…………………………5
3.2 Video Configuration……………….………………………………………………….…………………….…………5
3.3 Marker Configuration………………………………………………………..……….………….………………….…6
3.4 Display Configuration………………………………………………………….……………………….……………..7
3.5 Function Configuration………………………………………………………………………….…….…………..…..8
3.6 Audio Configuration………………………………………………………………………………………….……..…9
3.7 System Configuration…………………………………………………………………………………….………..….9
4. Specifications………………………………………………………………………………………………………….…...10
5. Dimensions…………....................................................................................……………………............................13
6. Monitor Care…………………………………………………………………………………………………………..……13
7. Warranty...............................................................................................................................………………..….....14
IMPORTANT SAFETY INSTRUCTIONS:
The V-LCD173HR 17. 3” LCD Monitor has been tested for conformance to safety regulations and requirements
and has been certified for international use. However, like all electronic equipment, the V-LCD173HR should be
used with care. Please read and follow the safety instructions to prote ct yourself from possible injury and to minimize
the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
V-LCD173HR Manual
Marshall V-LCD173HR 3
1. Introduction, Installation and Setup ____________ ___________ ___________ __________ __
■ Introduct ion and Installatio n
The V-LCD173HR 1 7 .3” LCD Monitor can be m ount e d in any standard EIA 19” equipment rack. T he attached rack ears can
be angled to provide the user control over the viewing angle. Adequate ventilation is required when installed to prevent possible
damage to the monitor’s internal components. Both VESA standard 75mm and 100mm hole pattern allow for custom mounting
installations.
■ Package Contents
• 1x V-LCD173HR 17.3” LCD Monitor
• 1x DC Adapter
• 1x TALLY Connector
NOT INCLUDED:
• Optional Marshall “V-ST15” base mount for desktop use
• (4) M4 screws needed to install “V-ST15” base mount
■ Connecti ons , Power-On, a nd Initial Se t up
Plug the power supply into an AC power source. Attach the power connector to the back of the monitor. Connect the required
cables for video signal input and output. (Power must be supplied to the V-LCD 173H R to activate the loop-though output.) The
monitor defaults to ‘ON’ when power is supplied. Choose the desired signal source by selecting the “SDI”, “HDMI” or “VIDEO”
button on the front bezel.
2. Panel Featur es ___________ __________ ___________ ___________ ___________ _______
Top and Front Panel Features
1 – Rack Mount E a rs: Use rack mount ears t o mount 6RU
racks or other display applications.
5 – Video Butt ons: Indicator lights up when signal
switches to VIDEO state.
2 – SDI Button: Indi c at or lights up when signal switches to
SDI state.
6 – Menu Naviga t ion Knob : Turn first for Volume,
Brightness, etc or press first for Main Menu.
V-LCD173HR Manual
Marshall V-LCD173HR 4
3 – HDMI Button : In dic at or lights u p when signal switches
to HDMI sta te.
7 – Headphone Jack: Standard 3.5mm stereo miniphone plug can be used.
4 – User-Definab le Function But t ons: Functions can be
customized by pressing any User button for 3-5 seconds.
These user-definable function buttons are assigned using
the on-screen direct access menu.
Default User Function Options:
F1: Aspect Ratio F2: Histogram F3: False Color
8 – Power But t on: Use the power button to switch the
screen ON and OFF.
Rear Panel Features
1 – USB Interf a c e : Onl y for program upgrades. NOT to be
used for non-professional use.
5 – Analog Audio “RCA” Con ne c tors: Left and right
audio inputs are active when “Video” is selected as the
video source. This audio may be monitored at the
headphone jack connection.
2 – Tally Input Connector: The LED tally can be
activated by connecting the corresponding pin to ground.
A variety of external devices can be used to perform the
contact closure. No additional power should be supplied to
the HD-15 port. See pinout guide next to connector.
6 – HDMI Digita l V ideo Conne c t ors: HDMI video input
and loop output. Embedded audio may be monitored at
the headphone jack connection and visually monitored
on-screen.
3 – Serial Digit al “BNC” Connectors: SDI input and loop
output are compatible with SDI, HDSDI and 3GSDI inputs.
Embedded audio may be monitored at the headphone jack
connection and visually monitored on-screen.
7 – 4-Pin Power Conne c tor:
To be used with 12-volt power supplies only.
Caution: 24 volt s 4-pin power supplies are NOT
compatible with this monitor. Please check label on
the power supply before connecting.
4 – Composite Analog “BNC” Connectors: Video input
and loop output are used for NTSC or PAL composite
(CVBS) video sources.
8 – VESA 75mm and 100mm Hole Patterns: VESA-
standard hole-patterns (75mm and 100mm) are
provided to accommodate a variety of custom
mounting options.
V-LCD173HR Manual
Marshall V-LCD173HR 5
3. Navigation Me nu_________ __________ ______________________________ __________ __
Main Menu: Push the MENU control button on the monitor to adjust the function configurations. To change configurations,
select a configuration from the main menu by turning the knob and pressing the menu button once to select. Edit configuration
by turning knob to change levels, then press menu button again to confirm the changes. Repeat with each selection as
needed.
3.1 Main Menu Navigat ion
Press the MENU knob on the monitor and function menus will pop-up on the screen. Rotate left or right
to select an option. Then press the knob again to open the selection. When an arrow pointer appears in
the menu, turn the Menu knob again to access the item or to confirm a selection.
3.2 Video Configuration Submenu
ITEMS
OPTIONS
Video Configuration
Exit
Brightness
0 – 100 (50 is default)
Contrast
0 – 100 (50 is default)
Saturation
0 – 100 (50 is default)
Sharpness
0 – 100 (0 is default)
Color Temp (White Bal)
6500K, 7300K, 9300K, User
Loading...