Marshall Electronics V-LCD101MD-3G Instructions

Marshall Electronics

Model No.

10.1” Camera-Top Monitor with Modular Input/Output

V-LCD101MD

32

Operating Instructions

ICW 11-30-2016

Marshall Electronics, Inc.

20608 Madrona Ave

Torrance, CA 90503

Tel: [phone] • Fax: [phone]

www.LCDRacks.com • [e-mail]

1

This page intentionally left blank

Maintenance

■ Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-fiber cloth
can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are
coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint
resistant cleaning agents are recommended. Do not apply excessive pressure to the screen to avoid damaging the LCD.

Faceplate Dusting

■

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface, attracting
dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

Warranty

Marshall Electronics warranties to the first consumer that this V-LCD101MD LCD monitor will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no
proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth
above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or
cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered
normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall
Electronics reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by
our technicians. No sales personnel of the seller or any other person is authorized to make any warranties other than those
described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period
described above. Due to constant effort to improve products and product features, specifications may change without notice.

2

31

Table of Contents

Installation and Initial Setup____________________________________________________ 5
Top and Front Panel Features__________________________________________________ 6
Rear Panel Features_________________________________________________________ 7
Compatible Input Formats_____________________________________________________ 8
Main Menu and Navigation____________________________________________________ 9
Using the menu buttons_______________________________________________________ 9
Using the RotoMenu (BRIGHT) knob_____________________________________________9
Scaling Submenu___________________________________________________________ 10
Color Submenu____________________________________________________________ 13
Markers Submenu__________________________________________________________ 15
Filters Submenu____________________________________________________________ 17
Audio Submenu____________________________________________________________ 22
Signal Analysis Submenu____________________________________________________ 23
User Settings Submenu______________________________________________________ 24
System Submenu___________________________________________________________ 26
Specifications______________________________________________________________ 28
Dimensions_______________________________________________________________ 29
Maintenance_______________________________________________________________31
Warranty_________________________________________________________________ 31

30

3

This page intentionally left blank

Dimensions

4

29

Specifications

Installation and Initial Setup

■

Unpacking

■

■

■

PANEL

Screen Size 10.1” Diagonal
Display Area (h x v) 217.44 x 135.9 mm
Pixels 1920 x 1200
Viewing Angle(h x v) 170° x 170°
Brightness 800 cd/m2
Contrast Ratio 800:1

VIDEO INPUT/OUTPUT

HDMI Input / Output

CONNECTORS

HDMI Video Input
1 x HDMI Female Receptacle

HDMI Video Output (Active Loop-Through)
1 x HDMI Female Receptacle

Stereo Headphone Jack
1/8” (3.5mm) Female Jack

■

■

ELECTRICAL

Power Consumption 1.25A @ 12VDC (15 W)
Voltage Requirement 12 VDC

MECHANICAL

Weight (with rack ears): 2.10 lbs

Operating Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature -4°F to120°F (-20°C to
50°C)

See Dimensions for exact specifications.

Carefully unpack the V-LCD101MD monitor and verify that the following items are included:

• V-LCD101MD Monitor

• V-PS12V-5V-XLR Power Supply

• Operating Instructions

Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately
contact Marshall Electronics at [phone]. If you are not located within the continental United States, call +1 (310) 333-

0606.

■

Connections, Power-On and Initial Setup

Plug the power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the Power connector to the back of the monitor.
Connect the required cables for video signal input and output. (Power must be applied to the V-LCD101MD for the active loop­though output to be activated.) The monitor defaults to ‘ON’ when power is supplied. Video will automatically be detected and
displayed on the screen.

Power Input
4-Pin XLR
Pin 1 – “-“
Pin 4 – “+”

Optional Module Slot MD-3GE

.

1X BNC input
1x loop through

28

5