Marshall Electronics OR-901-3GSDI User manual

OR-901-3GSDI Quick Start Guide

Marshall Electronics

Operating Notes

It is impossible review all of the functions of the OR-901-3GSDI in this quick start document. Below is a brief description of a few of the features.

User Marker:

This is for marking a particular area of the screen where a logo or titles may appear.

• In the main menu all marker selections must be OFF except for user marker.

• User Marker must be assigned to a Function Key.

• When selected follow screen prompts to adjust size and location.

G-Marker:

This will display a grid generated by the internal gyroscope as a “Monitor Level Assist”.

• Pressing the corresponding Function Key will turn the G-Marker ON and OFF.

• To calibrate the G-Marker to a known attitude, Press and HOLD the corresponding Function Key.

3-D Monitor Functions:

The Orchid OR-901-3GSDI includes several modes to assist the camera operator during 3-D production.

• The 3-D function requires a Single Link SBSH (Side by Side Half) formatted input.

• Anaglyph RED / CYAN glasses (model GL-ARC) are required to view 3-D Anaglyph images.

• There are five 3-D Review modes available from the SCREEN menu:

1. LEFT EYE

2. RIGHT EYE

3. BLENDING

4. LUMINANCE DIFFERENCE

5. CHROMA DIFFERENCE

• There are Four Anaglyph 3-D viewing modes available from the SCREEN menu:

1. COLOR

2. HALF COLOR,

3. OPTIMIZED,

4. GRAY

Marshall Electronics

OR-901-3GSDI

9” Camera Assist Field Monitor with Waveform, Vector Scope, Audio Meters, Audio Phase Display

And 3-D production modes

Warranty

Marshall Electronics warranties to the first consumer that this OR-901-3GSDI LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice

Marshall Electronics, Inc.

1910 East Maple Ave.

El Segundo, CA 90245

Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688

www.LCDRacks.com • sales@lcdracks.com

Quick Start Guide

OR-901-3GSDI Quick Start Guide

Marshall Electronics

OR-901-3GSDI Quick Start Guide

Marshall Electronics

For complete instructions, visit Marshall Electronics at www.lcdracks.com

Product Overview

The OR-901-3GSDI is a full featured camera top and field LCD monitor with dual 3G-SDI inputs. The OR-901-3GSDI has multiple analysis utilities such as Waveform Monitor, Vector Scope, Audio Level Meters and Audio Phase display to assist the videographer without the expense of multiple test instruments. Additionally the OR-901-3GSDI includes multiple modes to assist in the production of 3D content. The 960 x 540 resolution panel was chosen to allow monitoring of HD 1920 x 1080 video formats without scaling artifacts. The OR-901-3GSDI comes with a large external tally when used in view finder applications. The Light weight and slim profile provide great portability and ease of use.

Installation and Accessories

Carefully unpack the OR-901-3GSDI and verify that the following items are present:

• OR-901-3GSDI with attached stand and top carrying handle

• 12 volt AC/DC Power adaptor

• Regional power cord

• Quick Start Guide

• Spare “On Air” tally

• 1 pair GL-ARC 3-D glasses

4-pin XLR connector

-. PIN 1: GND

-. PIN 2: N.C.

-. PIN 3: N.C.

-. PIN 4: +12VDC

14.4V (Anton Bauer-Mount),

7.2V (Small battery mount). Operating voltage 7~30VDC

Function Keys

F-1 Through F-9 Available User Functions

INPUT 1 ASPECT AUDIO PRESET 4 WAVEFORM MON

INPUT 2 ZOOM AUDIO PRESET 5 VECTORSCOPE

GAMMA 1.0 HV DELAY AUDIO PRESET 6 CLIPGUIDE

GAMMA 1.8 MARKER AUDIO PRESET 7 TIMECODE

GAMMA 2.0 USER MARKER AUDIO PRESET 8 HISTOGRAM

GAMMA 2.2 G-MARKER AUDIO MUTE FALSE COLOR TG

GAMMA 2.4 AUDIO METER LAYOUT WFM FALSE COLOR MTF

GAMMA 2.6 AUDIO PEAK LOG LAYOUT WAV PEAKING COLOR

WHITEBALANCE D65 AUDIO MONITOR LAYOUT VS 3D REVIEW

WHITEBALANCE D93 AUDIO PRESET 1 LAYOUTALM 16 ANAGLYPH

MONO AUDIO PRESET 2 LAYOUT QUAD PEAKING COLOR

COLOR CHANNEL AUDIO PRESET 3 LAYOUT QUAD 2 FAN STOP

SCAN

OR-901-3GSDI Rear — Overview

Pin 1 Pin 8

OR-901-3GSDI Front — Overview

1 2 3 4 5

1. 3.5mm Headphone Jack

2. Speaker

3. User Assign Function Keys (9)

4. Roto Menu and Variable Level control

5. Power Switch and Indicator

F Key Default Function

1 2 3 4 5 6 7 8 9

INPUT 1

INPUT 2

SCAN

ASPECT

MARKER

ZOOM

WAVEFORM

VECTOR SCOPE

AUDIO LEVEL METERS

Rotary Knob Assignable Functions

BRIGHT SHARPNESS

CONTRAST VOLUME

SATURATION PEAKING

Note: When not in Menu mode pressing the Rotary knob will select between the six Rotary Functions.

Notes: 1. Internally pulled up with resister

1. 4-Pin XLR male Power Connector

2. Parallel Remote Connector (RJ-45 User Assignable Functions)

3. 3.5mm Stereo Line Output Jack

4. 3G/SD/HD-SDI Inputs (BNC)

5. Re-clocked 3G/SD/HD-SDI Output (BNC)

6. On Line Tally OFF / DIM / ON Switch

7. On Line Tally Indictor Storage Area

8. External Battery Connector (for use with optional battery mounts)

9. Service Port (for use with optional OR-SM service module to upgrade firmware and perform color calibration)

2. Fixed as Ground

Remote pin assign

PIN DEFAULT NOTE

1 RED TALLY 1

2 GREEN TALLY 1

3 BLUE TALLY 1

4 MARKER 1

5 GROUND 2

6 INPUT 1 1

7 INPUT 2 1

8 ASPECT 1