Page 1
OR-185-3GSDI
18.5” Master Confidence Monitor
User Manual
Page 2
OR-185-3GSDI
Table of Contents
1. Introduction ............................................................................................................................................... 4
2. Product Overview ..................................................................................................................................... 4
3. Features ................................................................................................................................................... 6
4. Specifications ........................................................................................................................................... 7
5. Installation and Connections .................................................................................................................... 9
5.1 Installation and Connect ................................................................................................................ 9
5.2 Video Input Connectors ................................................................................................................. 9
5.3 Audio Input & Output ...................................................................................................................... 9
5.4 Power Input .................................................................................................................................. 10
5.5 Optional Inputs (GPI, RJ-45 Remote / Service Port) ................................................................... 10
6. Dimensions ............................................................................................................................................. 11
7. Navigation Menu .................................................................................................................................... 12
7.1 Input Configuration Submenu ...................................................................................................... 12
7.2 Picture Configuration Submenu ................................................................................................... 13
7.3 Color Configuration Submenu ...................................................................................................... 13
7.4 Screen Configuration Submenu ................................................................................................... 14
7.5 Marker Configuration Submenu ................................................................................................... 14
7.6 Audio Configuration Submenu ..................................................................................................... 15
7.7 Audio Utility Configuration Submenu ........................................................................................... 15
7.8 Waveform Configuration Submenu .............................................................................................. 16
7.9 Vectorscope Configuration Submenu .......................................................................................... 17
7.10 ClipGuide Configuration Submenu .............................................................................................. 17
7.11 User Assign Configuration Submenu ........................................................................................... 18
7.12 Remote Configuration Submenu .................................................................................................. 19
7.13 SDI Configuration Submenu ........................................................................................................ 20
7.14 IMD Configuration Submenu ........................................................................................................ 20
7.15 Setup Configuration Submenu ..................................................................................................... 21
8. Color Calibration ..................................................................................................................................... 22
9. Firmware Updates .................................................................................................................................. 22
10. Monitor Care ....................................................................................................................................... 23
11. Warranty ............................................................................................................................................. 23
2 User Manual v1.0
Page 3
OR-185-3GSDI
IMPORTANT SAFETY INSTRUCTIONS:
The OR-185-3GSDI HD High Resolution Monitor has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic
equipment, this unit should be used with care. P l ease read and follow the safety instructions to protect
yourself from possible injury and to minimize the ri sk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and co nnection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
3 User Manual v1.0
Page 4
OR-185-3GSDI
1. Introduction
The OR-185-3GSDI High Resolution Monitor is an 18.5” Master confidence monitor for broadcast control rooms, transfer
facilities, and other production c ontr ol and ed iting ar e as, T he O R-185-3G S DI i nclud es a wide vari et y of product i on tools us ed by
video professionals including real-time Waveform, Vectorscope, Histogram, Audio Level Meters, Audio Phase Monitor and Audio
Peak Alarm, along with 3D monitoring and analysis functions.
The OR-185-3GSDI uses a 1920 x 1080 Full HD panel t hat can display h igh-qualit y images from any source or aspect ratio. All
OR-185-3GSDI screens are color mat ched at the factory and can be auto-adjusted in the field using an optional color probe
system (Konica Minolta CA-310 Color Analyzer).
The OR-185-3GSDI includes t wo auto-sensing 3G-SDI inputs, along with DVI-I, VGA, and ana log inputs. This unit can be used
as a portable stand-alone monitor equipped with f ront panel ster eo speaker s, integr ated carr ying hand le, and desk top stand. An
optional rack mount kit with tilt c apability is also available.
2. Product Overview
Front Panel
1. Standby Switch Button with Indicator
Operation Mode Button: Push to Power On and LED will turn Green. Press again for S tandby Mode and LED will turn Red.
2. Tri-Color Tally Light
30mm Tri-Color Tally Lamp (Red, Green, Yellow) is controlled via the Remote Connector located on the rear panel.
3. User-Definable Function Keys
Nine user-definable function butt ons can be used for quick access to various sett ings. Functions are assigned using the onscreen menu.
4. User-Defined Rotary Encoder
The Rotary Encoder may be assigned to one of several functions on the User Ass i gn menu. Available functions are: Bri ghtness
/ Contrast / Chroma (Saturation) / Sharpness.
5. Audio Control
Mute / Volume / Balance / 3.5mm stereo headphone jack.
6. 3W+3W Stereo Speakers
7. Attached Tilting Stand
8. Tilt Handle
4 User Manual v1.0
Page 5
Rear Panel
OR-185-3GSDI
1. Main Power Switch
This switch is the Main power switch. When using the AC power or an external DC sup ply, this switch will control the On/Off
status of the monitor. When using AC power, both switches must be on.
2. AC Power Input and AC On/Off Switch
Connect to 100 ~ 220 VAC power source. The switch will turn the internal power supply on and off. When using an external
24vDC supply, this switch will have n o effect.
3. GPI Input – Parallel Remote Connector
RJ-45 User Assignable Connector f or 7 user-assignable GPI inputs.
4. 3.5mm Stereo Audio Line Input and Output Jacks
Stereo line level input plus outputs for monitoring analog or embedded audio channels. The desired audio monitor channels are
selected in the audio onscreen menu. The output level is controlled there as well.
5. 3G-HD-SDI Digital Video Input Connectors
Dual auto-sensing BNC video inputs. Each input auto-detects 3G, HD and SD-SDI video signals.
6. Service Port
Proprietary connection used for firmware upgrades and to perform color calibration. An optional service m odule is required
(Marshall part number OR-SM)
5 User Manual v1.0
Page 6
OR-185-3GSDI
3. Features
High Resolution 18.5” Panel
The OR-185-3GSDI features an all-digital TFT-MegaPixel active matrix LCD system. The LCD panel features a brightness of 300
cd/m2 and a contrast ratio of 1000:1 making each display ideal in a variety of environments and lighting conditions.
Waveform Monitor Function
The built-in waveform monitor (which includes adjustable White and Black clip level indicators) can be displayed in various aspect
ratios, positions, and transpar ency options. The W aveform Monitor not on ly displays luminance, but can also warn the user for
out-of-range conditions such as ov erexposure or “blacker-than-black” errors with user-adjustable warning limits.
Real-Time Color Vectorscope
The built-in Vectorscope allows users to monitor color gamut range in real time. It displays in full color and can also be displayed
in various sizes, positions, and transparency options. The Vectorscope has adjustable gain from 1x to 5x.
ClipGuide
The ClipGuide function operat es with both the Waveform display and Monoc hrome/Color picture display. Both the upper and
lower ClipGuide levels are adj ustable to accurately display over-and-under exposures du ring different shooting c onditions. For
example, the upper ClipGuide limit ma y be set to 85 IRE and lo wer limit to 10 IRE. W ith thes e settin gs, an y exposures over th e
set limit of 85 IRE will display red on both the Wav eform and picture (if selected). Same is true for black s under 10 IRE.
Chroma Monitor Function
Included in the ClipGuide menu are settings for monitoring color gamut errors which can occur in color space conversion. Any
data exceeding these values will be displayed as yellow in the picture. The factory presets limits are 16 and 240 according to ITUR BT.709. During normal video prod uction, these values should not be exceeded.
Precision Audio Level Meters
De-embeds and displays up to 16 channels of audio using sixteen 64-segment tri-color Audio Meters with user-adjustable
reference levels. The Audio Level Meters provide numerical indicators and headroom levels, as well as peak hold function. Audio
Channel Loss Warning prevents errors during monitoring.
Precision White Balance with Color Temperature Adjustment
White balance adjustment is essent ial in orde r to render colors correctly. T o display color s correc tly, gra y scale sh ould maint ain
identical color temperature. The white balance for ORCHID monitors defaults to D65 (6500K) so the user does not need to adjust
white balance. LCD monitors have color-matching issues because white balance can be affected by a change in luminance level.
This unique color management system solves this problem. The ORCHID operating system includes an Automatic White Balance
function that allows a “One Button” calibration procedure when used with a Minolta CA-310 color probe. All ORCHID Series LCD
panels are calibrated at the factory to ensure color conformity between screens.
Select Color Temperature and Gamma Mode
Color temperature presets range between D65 and D93. User defined settings can be used as well. Gamma settings are
adjustable from 1.0 to 3.0 in 0.1 increments. The standard setting is 2.2.
Flexible Screen Markers
A variety of screen markers in 4:3, 16:9, and full sc reen modes allow accurate monit oring of the different aspect ratios used in
broadcast environments.
User-Definable Function Buttons
Nine User-Definable Function But tons and one R otary Encoder on the fr ont panel all ow quick ac cess to num erous set tings and
features including Input 1, Input 2, Option Input, Waveform, Vectorscope, Audio Bars, Aspect Ratio, Screen Markers,
Monochrome Mode, H/V Delay Mode, and more.
Audio Jack
Three 3.5mm AUDIO jacks are included. It is possible to utilize both the front panel headphone connector and rear panel speaker
connector simultaneously with individual volume cont rols. When menu mode is not used, the rotary encoder on th e front panel
may control the headphone and internal speaker volume.
6 User Manual v1.0
Page 7
OR-185-3GSDI
Type
TFT-LCD
Display Area
408.96 x 230.4, 18.5" (Diagonally)
Pixels
1920(H) x 1080(V), Full HD
Pixel Pitch
(mm)
Color Depth
16.7M (8bit), true color
Brightness
(cd/m²)
Contrast
Ratio
COMPOSITE
CVBS
S-VIDEO
Y/C
COMPONENT
YPbPr
RGB
Sync on Green
SMPTE-424M
3G (2.97 GB/s)
SMPTE-292
HD (1.485 GB/s)
SMPTE-259M
SD (270 MB/s)
DVI
1 x DVI-I
HDMI
N/A
SMPTE-424M
3G (2.97 GB/s)
SMPTE-292
HD (1.485 GB/s)
SMPTE-259M
SD (270 MB/s)
HDMI
N/A
YCBCR, 4:2:2, 10-bit
1080p (60/59.94/50)
1080p (30/29.97/25/24/23.98)
1080PsF (30/29.97/25/24/23.98)
1080p (30/29.97/25/24/23.98)
720p (60/59.94/50/30/29.97/25/24/23.98)
1080p (30/29.97/2524/23.98)
2048x1080p24, 2048x1080PsF24
1080p (30/29.97/25/24/23.98)
720p (60/59.94/50p/30/29.97/25/24/23.98)
1080i (60/59.94/50)
1080PsF (30/29.97/25/24/23.98)
4. Specifications
Panel
0.213 (H) x 0.213 (V)
300 (cd/m²)
1000:1
INPUT
OUTPUT
Supported
Formats
ANALOG
SDI
SDI
SDI
SMPTE 425M-AB
YCBCR, 4:2:2, 12-bit
YCBCR(RGB) 4:4:4,
10-bit
YCBCR(RGB) 4:4:4,
12-bit
3 x BNC, 1 x HD-15
2 x BNC
1 x BNC (Loop-through)
1080i (60/59.94/50)
1080i (60/59.94/50)
1080PsF (30/29.97/25/24/23.98)
1080i (60/59.94/50)
1080PsF (30/29.97/25/24/23.98)
SMPTE 274M YCBCR, 4:2:2, 10-bit
YCBCR(RGBA)
4:4:4:4, 10-bit
1080i (60/59.94/50)
1080PsF (30/29.97/25/24/23.98)
1080p (30/29.97/25/24/23.98)
7 User Manual v1.0
Page 8
OR-185-3GSDI
SMPTE 296M
YCBCR, 4:2:2, 10-bit
720p (60/59.94/50/30/29.97/25/24/23.98)
SMPTE 125M
525i (NTSC, 480i60)
ITU-R BT.601
625i (PAL, 575i50)
CVBS
NTSC, PAL, 480i60, 575i50
480i/480p/575i/576p/720p/1080i/1080p
640x480/800x600/1024x768/1280x1024
@60Hz
CE Video format
IT Video format (VGA
XGA, SXGA (VESA))
CE Video format
IT Video format
SXGA)
640x480/800x600/1024x768/1280x1024
@60Hz
480p (60/59/94)
1080p (60/59.94/30/29.97/25/24/23.98)
Power
100~240VAC@50~60Hz Or DC 24V
Power
Consumption
Temperature (°C)
0°C~40°C
Humidity (%)
30%~85% (Non-Condensing)
Temperature (°C)
-20°C~60°C
Humidity (%)
0%~90%
Weight
33 lbs.
Dimensions
(WxDxH, mm)
INPUT
3.5mm stereo jack
1 (Rear)
+4dBu(1.228mVrms)
3.5mm stereo jack
1 (Rear)
+4dBu(1.228mVrms)
3P XLR
N/A
3.5mm stereo jack
1 (Front)
6.3ø stereo jack
N/A
Speaker
Built-in (3W+3W Stereo Speaker)
ANALOG
COMPONENT
HDMI Sync CEA-861-E
HDMI Source CEA-861-E
DVI DDWG DVI 1.0
(IBM VGA), SGA,
(VGA, SGA, XGA,
IT Video format
CE Video format
N/A
N/A
480i (60/59.94)
576p50
575i50
720p (60/59.94/30/29.97/25/24/23.98)
1080i (60/59.94/50)
General
Audio
Approx. 40W(24V, 1.5A)
Operating
Storage
442 x 307 x 80
OUTPUT
Headphone
8 User Manual v1.0
Page 9
OR-185-3GSDI
5. Installation and Connections
5.1 Installation and Connect
Carefully unpack the OR-185-3GSDI and verify that the following items are present:
• OR-185-3GSDI with attached stand
• AC Power cord
Mounting
The OR-185-3GSDI is designed to be a tabletop production monitor. Attached stand and tilt handle are included.
Optional rack mount kit can be purchased.
Connections and Power
The OR-185-3GSDI uses a standard AC p ower outlet (100~220VAC) or a 24VDC 4-pin XLR power supply. Connect
the required cables for video signal input and output (must be powered for the active loop-outputs to be act ivated).
5.2 Video Input Connectors
BNC Video Input Connectors (3G, HD and SD-SDI video signals)
5.3 Audio Input & Output
Connect Speakers to Audio Output on Rear Panel
Connect 3.5mm Stereo Headphone Jack on Front Panel
9 User Manual v1.0
Page 10
OR-185-3GSDI
5.4 Power Input
After connecting the AC power, Switch under the button to the ON Position
5.5 Optional Inputs (GPI, RJ-45 Remote / Service Port)
RJ-45 connector for GPI Inputs
Service Port for firmware upgrades and LCD color balance calibration, please contact Marshall Electronics before using
this port.
10 User Manual v1.0
Page 11
OR-185-3GSDI
6. Dimensions
11 User Manual v1.0
Page 12
OR-185-3GSDI
ITEMS
OPTIONS
Input Configuration
Return
Input SDI
SDI 1, SDI 2
7. Navigation Menu
Main Menu:
a configuration from the main menu by turning the knob and pressing the menu button once to select. Edit c onfiguration by turning
knob to change levels, then press menu button again to confirm the changes. Repeat with each selection as needed.
Push the MENU control button on the monitor to adjust the function configurations. To change configurations, select
7.1 Input Configuration Submenu
12 User Manual v1.0
Page 13
OR-185-3GSDI
ITEMS
OPTIONS
Picture Configuration
Return
Brightness
Levels 0-100
Contrast
Levels 0-100
Chroma
Levels 0-100
Sharpness
Levels 0-100
Gamma
Levels 1.00 - 3.00 (increments of .05)
Reset to Default
Cancel, Reset Now
ITEMS
OPTIONS
Color Configuration
Return
Color Matrix
Auto, RGB, BT.601, BT.709
Color Temp
False Color MTF, False Color T G, CIE D65, JP D93, User ,
CAL D65, CAL D93
Red Bias
Levels -128 to +127
Green Bias
Levels -128 to +127
Blue Bias
Levels -128 to +127
Red Grain
Levels 0.500 to 1.992
Green Grain
Levels 0.500 to 1.992
Blue Grain
Levels 0.500 to 1.992
7.2 Picture Configuration Submenu
7.3 Color Configuration Submenu
13 User Manual v1.0
Page 14
OR-185-3GSDI
ITEMS
OPTIONS
Screen Configuration
Return
Scan
Normal, Overscan, Magnify, PXBYPX
Aspect
Auto, 4:3, 16:9, 1.85:1, 2.35:1, Payload
Mono/Color
RGB, Mono, Red, Green, Blue
HV Delay
Off, On
Shift H
Levels -128 to +127
Shift V
Levels -128 to +127
3D Review
Off, Left Eye, Right Eye, Blending, Luminance Diff, Chroma
Diff
Anaglyph
Off, Color, Half Color, Optimized, Gray
ITEMS
OPTIONS
Marker Configuration
Return
Marker
Off, On
Center
Off, On
Aspect
Off, 4:3, 16:9, 1.85:1, 2.35:1, 4:3 & 1. 85, 4:3 & 2.35
Safety Aspect
Off, 4:3, 16:9, User
Ratio
80% - 99%
Cross Hatch
Off, Small, Medium, Large
Marker Mat
Clear, Halftone, Black
Line Thickness
Levels 1-3
7.4 Screen Configuration Submenu
7.5 Marker Configuration Submenu
14 User Manual v1.0
Page 15
OR-185-3GSDI
ITEMS
OPTIONS
Audio Configuration
Return
Front Volume
Levels 0-40
Headroom Start
Levels -0dB to -60dB
Headroom End
Levels -0dB to -60dB
Left Channel
Channel Level 1-16
Right Channel
Channel Level 1-16
Load Channel Preset From
Preset Channel 1-8
Save Channel Preset To
Preset Channel 1-8
Channel Preset
Unlock, Lock
Source
Embedded, Audio In
ITEMS
OPTIONS
Audio Utility Configuration
Return
Level Meter
Off, On
Background
Off, On
Decay
Fast, Medium, Slow
Display Channels
Levels 1-16
Display Filter
All, Active
Columns
Dual, Quad, Vertical
7.6 Audio Configuration Submenu
7.7 Audio Utility Configuration Submenu
15 User Manual v1.0
Page 16
OR-185-3GSDI
Display Type
Overlap, Overlay
Audio Peak Log
Off, On
Log Speed
4S, 8S, 20S, 60S, 120S, 300S
Size
Small, Large
Position
Left Top, Left Bottom, Right Top, Right Bottom
Audio Phase Mon
Off, On x1, On x2, On x4, On x8
Display Persistency
1 Frame, 4 Frame, 8 Frame, 16 Frame
Size
Small, Medium, Large
Position
Left Top, Left Bottom, Right Top, R ight Bottom
Display Type
Overlap, Overlay
Audio Spectrum
Off, On
Decay
Slow, Medium, Fast
Size
Small, Medium
Position
Left Top, Left Bottom, Right Top, R ight Bottom
Display Type
Overlap, Overlay
ITEMS
OPTIONS
Waveform Configuration
Return
Layout
Normal, Deck, Quad
Waveform
Off, Y WFM, YCbCr WFM, GBR WFM
Size
Small, Medium, Large
Position
Left Top, Left Bottom, Right Top, R ight Bottom
Display Type
Overlap, Overlay
Y Over Limit
Levels -7.3 to 109.1%
Y Under Limit
Levels -7.3 to 109.1%
Graticule
Percent, Digital 8 Bit, Digital 0 Bit, mV
Histogram
Off, Y Only, RGB Overlay, RGB Parade
Position
Left Top, Left Bottom, Right Top, R ight Bottom
7.8 Waveform Configuration Submenu
16 User Manual v1.0
Page 17
OR-185-3GSDI
ITEMS
OPTIONS
Vectorscope Configuration
Return
Layout
Normal, Deck, Quad
Vectorscope
Off, On
Size
Small, Medium, Large
Position
Left Top, Left Bottom, Right Top, R ight Bottom
Display Type
Overlap, Overlay
Gain
Levels x1.00 to x4.98
ITEMS
OPTIONS
ClipGuide Configuration
Return
ClipGuide
Off, On
Mode
Luma (Y), Luma (Y) Mono, Chroma (C), Chroma (C) Mono,
Y & C, Y & C Mono
Display Type
Zebra, Fill
Y Upper Limit
Levels -7.3% to 109.1%
Y Lower Limit
Levels -7.3% to 109.1%
C Upper Limit
Levels 0-255
C Lower Limit
Levels 0-255
7.9 Vectorscope Configuration Submenu
7.10 ClipGuide Configuration Submenu
17 User Manual v1.0
Page 18
OR-185-3GSDI
• SDI 1
• Layout WFM
7.11 User Assign Configuration Submenu
F1, F2, F3, F4, F5, F6, F7 Custom Buttons
Use this setting to customize the F 1-F7 buttons on the monitor’s keypad. Choos e between the following options:
• SDI2
• Gamma 1.0
• Gamma 1.8
• Gamma 2.0
• Gamma 2.2
• Gamma 2.4
• Gamma 2.6
• Gamma 2.35
• White Bal D65
• White Bal D93
• Mono
• Color Channel
• Scan
• Aspect
• Magnify
• HV Delay
• Pixel by Pixel
• Marker
• User Marker
• Audio Meter
• Audio Peak Log
• Audio Phase Mon
• Audio Spectrum
• AudioPreset 1-8
• Audio Mute
• Layout Wav
• Layout VS
• Layout ALM16
• Layout Quad
• Layout Quad2
• Waveform Mon
• Vectroscope
• ClipGuide
• Timecode
• Histogram
• False Color TG
• False Color MTF
• 3D Review
• Anaglyph
• Hide All Util
• 3D Left Eye
• 3D Right Eye
• 3D Blending
• 3D Luma Diff
• 3D Chroma Diff
• Glyph Color
• Glyph 1/2 Color
• Glyph Optimized
• Glyph Gray
18 User Manual v1.0
Page 19
OR-185-3GSDI
• R Tally
• User Marker
7.12 Remote Configuration Submenu
PIN 1, PIN 2, PIN 3, PIN 4, PIN 5, PIN 6, PIN 7, PIN 8 remote control
Use this setting to customize the how pins 1 to 8 function. Choose between the following options:
• G Tally
• B Tally
• Left R TLY
• Left G TLY
• Left B TLY
• Right R TLY
• Right G TLY
• Right B TLY
• Power Save
• Neutral
• SDI 1
• SDI 2
• Gamma 1.0
• Gamma 1.8
• Gamma 2.0
• Gamma 2.2
• Gamma 2.4
• Gamma 2.6
• Gamma 2.35
• White Bal D65
• White Bal D93
• Mono
• Color Channel
• Scan
• Aspect
• Magnify
• HV Delay
• Red Only
• Blue Only Green Only
• Pixel by Pixel
• Marker
• Audio Meter
• Audio Peak Log
• Audio Phase Mon
• Audio Spectrum
• AudioPreset 1-8
• Audio Mute
• Layout WFM
• Layout Wav
• Layout VS
• Layout ALM16
• Layout Quad
• Layout Quad2
• Waveform Mon
• Vectroscope
• ClipGuide
• Timecode LTC
• Timecode VITC1
• Timecode VITC2
• Histogram
• False Color TG
• False Color MTF
• 3D Left Eye
• 3D Right Eye
• 3D Blending
• 3D Luma Diff
• 3D Chroma Diff
• Glyph Color
• Glyph 1/2 Color
• Glyph Optimized
• Glyph Gray
• Hide All Util
19 User Manual v1.0
Page 20
OR-185-3GSDI
ITEMS
OPTIONS
SDI Status Configuration
Return
Error Count
Reset Counter
Display
Off, On, Auto
ITEMS
OPTIONS
IMD Configuration
Return
IMD
Off, On
Color
White, Red, Blue, Green
Preset IMD
Camera 1, Camera 2, Monitor 1, Monitor 2, VTR 1, VTR 2,
Program, Preview, AUX, Record
Custom IMD
Camera 1, Camera 2, Monitor 1, Monitor 2, VTR 1, VTR 2,
Program, Preview, AUX, Record
Size
Small, Large
Position
Top, Bottom
7.13 SDI Configuration Submenu
7.14 IMD Configuration Submenu
20 User Manual v1.0
Page 21
OR-185-3GSDI
ITEMS
OPTIONS
Setup Configuration
Return
Format Display
Auto, On, Off
VPID Detect
Off, On
Timecode
Off, LTC, VITC1, VITC2
Size
Small, Large
Position
Top, Bottom
UserBit
Off, On
Power Save
Always On, 2 Min, 5 Min, 10 Min, 30 Min, 1 Hour, 2 Hour
Key Lock
Unlock, Lock
Picture Delay
N/A
Backlight
Levels Min or 26-100%
Reset to MFG Default
Cancel, Reset Now
Backup User Config
Cancel, Backup Now
Restore User Config
Cancel, Restore Now
7.15 Setup Configuration Submenu
21 User Manual v1.0
Page 22
OR-185-3GSDI
8. Color Calibration
Color Calibration:
• Allow both the unit to be calibrated and the Minolta® CA-310 to warm up for a minimum of 20 minutes.
• Attach the CA-310 color probe to the update dongl e.
• With the unit turned on, insert the update dongl e into the service port at the rear of the device.
• Use the Rotary Menu navigation control and go to:
- Color Menu
- Color Temp
- Cal D65/D93 to calibrate both
- Cal D65 to calibrate only D65
- Cal D93 to calibrate only D93
• Press ENTER once to select and again to confirm.
• Follow the on-screen instructions.
Notes:
1. If color probe is not attached or you make a mis take and try to calibrate an incorrect screen, an error message will be
displayed and the screen will automatically default to the previous s ettings.
2. If the calibration process is interrupted, the screen settings will be corrupted and the c alibration process will need to be
repeated.
9. Firmware Updates
Firmware Updates: An optional OR-SM Service Module and internet connection are required to update the firmware.
1. Download the Orchid updater software package from the Marshall websit e.
2. Unzip files and save. Double-clic k the Orchid updater program and instal l new firmware.
3. Turn on the Orchid unit to be upgraded and connect to computer.
4. Insert the OR-SM module in the service port.
5. Run the Orchid update program, click update.
6. The Updater will check for available software, compare, and update if appl icable.
Notes:
• The update process will take approx i m ately 8 minutes.
• If the Orchid model is not automatically detected, the appropriate mod el wi l l need to be selected to update.
22 User Manual v1.0
Page 23
OR-185-3GSDI
10. Monitor Care
Screen Cleaning
Periodically clean the screen surfac e usi ng a mm onia-fr ee c l eaning wipes (Marshall Part No. V-HWPK). A clean micro-fiber cloth
can also be used with non-abrasive and am monia-f ree cle ani ng age nts. Do not use paper t o wels. Paper to wel fibers are co arse
and may scratch the surface of the polycarbonate f aceplate or leave streaks on the surface. Antistatic and fingerprint resi stant
cleaning agents are recommended. D o not apply excessive pressure to the screen to avoid damaging the LCD.
Faceplate Dusting
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface, attracting
dust particles. Neutralize static electricity effects by using the recom mended cleaning and polishing practice.
11. Warranty
Marshall Electronics, Inc. warrant ies to the first consumer that this OR-185-3GSDI HD High Resolution Monitor will, under
normal use, be free from defects in workma nship and mat erials, when r eceived in its or iginal cont ainer, for a perio d of one year
from the purchase date. This warrant y is extended to the first c onsumer only, and proof of purc hase is necessary to honor the
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics, Inc. reserves the right not to honor
the warranty set forth above. Therefore, labor an d parts may be charged to the consumer. T his warranty does not apply to the
product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty.
No sales personnel of the seller or any oth er perso n is auth orized t o make an y warranti es other than th ose descr ibed abov e, or
to extend the duration of any warranties on behalf of Marshall Electronics Inc., beyond the time period described above.
Note: Due to constant effort to improv e products and product features, specific ations may change without prior notice.
20608 Madrona Avenue, Torrance, CA 90503
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.lcdracks.com
support@marshall-usa.com
23 User Manual v1.0
Loading...