Marshall Electronics M-LYNX-19-RM, M-LYNX-15-WM User manual
Marshall Lynx LCD
Universal Monitors
User Manual
Marshall
Industrial Video/Security Div.
For more information, contact Marshall Electronics, Industrial Video & Security (800) 800-6608
www.mars-cam.com
Lynx LCD Monitor User Manual Lynx LCD Monitor User Manual
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CONTENTS
Caution:To reduce the risk of electric
shock, do not remove the back.
There are no user-serviceable
parts inside. Always refer
servicing to qualified personnel.
Graphic Symbol Explanation
The lightening flash symbol inside the triangle is intended to
alert the user to the presence of un-insulated and dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Important Safegaurds .....................................................4
Introduction ....................................................................6
Specifications ..................................................................7
Front Panel Components and Controls ........................12
Setting Up the Monitor ..................................................13
Audio/Video Inputs ........................................................19
The exclamation point within the triangle is intended to alert the
user to the presence of important operating and maintenance
!
Warning– To Prevent Fire or Shock Hazard, DO NOT
Expose this Monitor to Rain or Moisture
This product must be grounded.
Product specifications are subject to change without notice.
(servicing) instructions.
2
Troubleshooting .............................................................21
Remote Control Functions ............................................22
Lynx Monitors VGA Resolution Chart ..............................23
3
Lynx LCD Monitor User Manual
Lynx LCD Monitor User Manual
IMPORTANT SAFEGUARDS
Caution
Please comply with warning regarding power requirements. The power
source contains high voltage parts. If the cover is removed, it may cause
fire or electric shock. Do NOT remove the cover.
1. Read the Instructions: All safety and operating instructions should be read
before the monitor is operated.
2. Follow the Instructions: All operating and user instructions should be followed.
3. Cleaning: Unplug the monitor from the wall outlet before cleaning.
Do not use liquid aerosol cleaners. Use only a damp,
soft cloth.
4. Water and Moisture: Do not use the monitor in damp environments. For
example, do not operate the monitor in bathrooms,
sinks, laundry rooms, wet basements or near a
swimming pool. Lynx monitors are not recommended
for outdoor use.
5. Accessories: Always ensure that the monitor is placed on a solid,
steady surface/stand. To avoid any possible danger
and/or damage, do not place the monitor on an
unsteady stand, stool, or other surface that could
result in the monitor falling.
6. Ventilation: Slots and openings in the monitor’s cabinet are
provided for ventilation and ensure reliable operation
of the monitor and to protect it from over-heating.
These openings must never be blocked. The monitor
should never be placed near or over a radiator or
head register. This monitor should not be placed or
built in to a rack or bookshelf unless proper ventilation
is provided and supplier instructions have been
adhered to.
7. Object and Liquid Entry: Never push any kind of object into this monitor
through an opening as it may touch dangerous volt age points or short out parts that would result in fire
or electric shock. Never spill liquid of any kind into
the monitor.
8. Repair (Servicing): Do not attempt to repair this monitor yourself by
opening or removing covers. This may expose you to
dangerous voltage or other hazards. Refer to a qualified
service technician if servicing is necessary. If monitor is
opened by anyone other than a factory authorized
service center, the warranty is voided. If serial number is
removed or tampered with, the warranty is voided.
9. Parts Replacement: When part replacement is required, make sure it is
performed by a qualified technician and that the parts
are supported by the manufacturer.
10. Safety Check: Upon completion of any service or repair to the
monitor, ask the service technician to perform a
safety check to ensure that the monitor is in
proper operating condition.
11. Keep the Instructions: The safety and operating instructions should be
kept for future reference.
4
5
Lynx LCD Monitor User Manual
Lynx LCD Monitor User Manual
SPECIFICATIONS
INTRODUCTION
Thank you for purchasing the Marshall Lynx LCD Monitor. The Lynx Series of Universal
Monitors offers high performance features and excellent picture quality for use in a variety
of industrial/commercial applications.
The information contained in this instruction manual covers the installation and operation
of the monitors, and we encourage you to read it carefully. All the installation materials,
wire/cables must pass quality inspections in accordance with international electrical rules
and laws. When installing your monitor, remember to always adhere to local ordinances
and laws concerning wire and cable installation.
Note: A/V inputs/outputs as well as optimal resolution will vary by screen size. Refer to
Specifications section for more in-depth details.
Display Unit 15” 4:3 TFT/LCD
Video Input/Output 1-channel s-video input/output
2-channel multiple video BNC input/output
1-channel VGA input, 1 channel DVI input
1-channel YPbPr input.
Audio Input/Output 3-channels RCA input/output
Front Panel Controls Menu, Volume, Channel, and Stand-by Power
Power Input AC100V ~ 230V 50 ~60Hz
Power Consumption Max: 32W
Dimensions 358mm x 300mm x 68.5mm
(W x H x D)
Weight 9.9 lbs/4.5kg
Maximum Vertical Resolution Max 1080 lines
Video System NTSC/PAL
VGA/DVI connector Resolution: 1024 x 768
Speakers Max: 2 x 1.0W
Maximum Brightness 300cd/m
Maximum Contrast 450:1
Response Time 8ms
Viewing Angle 170º/150º
Operating Environment Temperature: 0º C ~ 40º C
Humidity: 10% ~ 85%
6
2
7
Loading...