Dear users:
Thank you for purchasing Marshall’s M-CT710 HD LCD Monitor. This 7”
Pro HD LCD Monitor is designed to be used as an external video display,
allowing you to step back from the camera while still being able to frame
and capture the action without having to look through the camera’s built-in
viewnder. It employs advanced integrated circuits, high quality TFT LCD
modules, and low power consumption.
This monitor is designed to be small, easily operated, and portable, with
HDMI, Composite Video, Audio Input and HDMI Output. This monitor can
be powered by DSLR, Camcorder and AA batteries
Product Advanced Features:
• Zoom mode
• HDMI input and output. Video Input and Audio input
• Viewnder marked ranges:0%, 85%, 90%, 93%, 96%
• Cross the screen center mark
• 16:9 or 4:3 Aspect Ratio Setting
• Earphone stereo output.
• Speaker
• Brightness, Contrast, Hue, Saturation and Color Temperature Adjustment
• Field - Normal, Red, Green, Blue, Gray
• Supports , camcoder or AA batteries
• Removable Sunhood
• 2 Years warranty with registration (see registration form)
To ensure the best use of this product, please read this manual carefully
beforehand.
CAUTION
1. Please use the adapter attached in the accessory or another qualied
adapter.
2. Please do NOT expose this product to direct sunlight, heat, or humid
conditions.
3. Please keep away from strong light while using this product to ensure
the image effect and long-term use.
4. Please avoid heavy impact or drop onto the ground.
5. Please do NOT use chemical solutions to clean this product. Please
wipe with a clean, soft cloth to maintain the brightness of the surface.
6. Please do not take apart or repair the unit by yourself to avoid damage
the product.
The monitor can be powered by the enclosed DSLR, Camcorder equivalent
12V power abater or AA batteries or equivalent battery or by a 12V power
adapter. Please note the input polarity is Positive with respect to --○-+,
otherwise will damage the monitor!
3. Operating instruction
3.1 Menu operating instructions
Before setting the menu functions, please make sure the device is
connected correctly. Power switch is to ON position. The monitor
enters into working state. Please dial to OFF position when closing the
unit.
After selecting the optionals, press “►”or “◄” on the unit to conrm, then
using “▲” or “▼” to select or adjust the value of Analog Data. After conrm
the needed adjust parameters, using “►” or “◄” to adjust. If you need to
exit OSD menu, repress “MENU” button.
Brightness
To adjust brightness 0-100. Default value is 50.
Contrast
To adjust contrast 0-100. Default value is 50.
Marshall
Function
Color
Saturation
To adjust Saturation 0-100. Default value is 50.
Hue
To adjust Hue 0-100. Default value is 50.
Sharpness
To adjust the Sharpness.
Color temperature
To adjust the color temperature.
Pre set 9300, 6500, or User
User-R 0-255 Default value is 128.
User-G 0-255 Default value is 128.
User-B 0-255 Default value is 128.
System
Sound
To adjust the volume left and right arrows buttons on the front of the
monitor. Default value is 0.
5.1. Standard
Mini HDMI to HDMI cable
HDMI to HDMI cable
Hot shoe mount
battery
Battery Charger
User manual
5.2. Optional
BNC to RCA adapter
DC 12V power adapter
BNC cable
Sunhood
6. Troubleshooting
6.1. Only black and white or monochrome picture. Please check saturation,
brightness & contrast adjustment.
6.2. No picture after turning on the power. Check signal cable connecting,
make sure use the standard adapter is connected the monitor. If power is
supplied by battery, please check if the battery is fully charged.
6.3. The image color distortion or abnormal, e.g. lack some color. Please
check signal cable whether connected correctly or not. If the cable is
damaged or loosened, it will cause poor transfer, causing this malfunction.
Check “color” function menu “color temperature” adjustment, whether
adjustment misconduct under the “user” state.
If you are still experiencing problems, contact Marshall Electronics
technical support at: (800) 800-6608 or +1 (310) 333-0606