Marshall Electronics CV610-U3W-V2 Installation Guide

CV610-U3-V2
Quick Installation Guide
Connecting
1. Open the box, take out the camera body and the accessories from the box.
2. Check the items with the list of “What’s in the box”.
3. Before you connect the camera:
Please check your power outlet type and status. The power cord head supplied is Type A. If it doesn’t  your wall power outlet, a suitable power adaptor (Not included) is needed. Make sure your computer has USB3.0 equipped and the computer has been turned on. If you want to control the camera via virtual COM port, provided successfully. Install the video viewer / third party video client soware for using the camera.
4. Insert power cord into the power adaptor. The power adaptor Input Voltage is 100-240V AC adapve.
Output Voltage is 12V
5. Insert the 12V DC head into the camera DC Power Port. The ca
6. Use supplied USB3.0 cable to connect the USB3.0 port on the camera and
7. The camera can be found and recognized by the computer automa .
Connect the power cord to wall AC power outlet. *Use only the AC power adaptor (JEITA type4) supplied with the unit. Do not use any other AC power adaptor.
turned on and operang camera inalizing right away. The power LED indicator will turn green color.
USB3.0 port on your Notebook /PC/Mac.
USB3.0 driver is not needed. Follow the user
DC, 2A.
the COM port driver needs to be installed
mera can be
guide for details. You will have the video ready to use.
CV610-U3-V2 PTZ Camera
Power Adapter & Power Cord
IR Remote Controller
(Requires 3V CR-2025 Battery)
USB 3.0 Cable (1.5m)
Camera Breakout Cable
User Manual
Mounting
In most cases of using the USB3.0 camera, the camera will be placed upright on table top. You don’t need to mount it. If you want to install it with wall mount or ceiling mount, you need to purchase mounng bracket (Not included).
Ceiling Mounng:
Ceiling Mount Bracket
CV610-U3-CM
Wall Mounng:
Wall Mount Bracket
CV610-U3-WM
Use Tripod:
This camera can be mounted on any type of tripod with standard ¼ inch screw.
www.marshall-usa.com
Loading...