Marshall Electronics CV505-MB, CV505-M User Manual
1920x1080p@50/60 or 59.94
CV505-MB/M Quick Start Guide
LCDracks.com
Full-HD (3G/HD-SDI) 2.5MP Mini-Broadcast
POV Camera with 3.7mm 2MP Lens
Precautions
Do not use the camera if fume s, smoke or a strange odor is emi tted
!
WARNING
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
from the unit, or if it seems to no t function correctly. Discon nect the
power source immediatel y and consult your supplier.
Always follow the instru ctions in the installatio n guide when
applying power. Fire and equi pment damage can occur if pow er
is applied incorrec tly. For the correct power supply, refer to the
Do not install or operate i n small, unventilated areas. He at build up
To prevent damage, do not drop th e camera or subjec t it to strong
shock or vibration.
If installed close to a TV, radio transmit ter, magnet, electric motor
interfere with or disto rt the image.
Whether or not the camera is use d outdoors, never point it to ward
the sun. Use caution when ope rating the camera in the vicinit y of spot
Do not use the camera in ex treme environments whe re high
temperatures or high hu midity exists. Use th e camera under
conditions where tempe ratures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is b elow 90%.
Features
· 2.5 Megapixel 1/3-inch CMOS Sensor
· 3.7mm Megapixel M12 Prime Lens installed (interchangeable)
· CV505-MB: 1920x1080p59.94/29.97, 1920x1080i59.94,
1280x720p59.94/29.97fps
· CV505-M: 1920x1080p60/50/30/25, 1920x1080i60/50,
1280x720p60/50/30/25fps
· 3G/HD-SDI (BNC) & HDMI (full size v1.3) built into rear panel
· Lemo-style (I/O) connector contains
· Audio Mic Stereo (TRS) input embedding
w/ 2.5V power supply (embeds 3G/HD-SDI & HDMI)
· OSD Menu Joystick, RS-485 connectable (Pelco/Visca)
· 12VDC
Rear Panel Video/Power Connection Specifications
CV505
Image Sensor 1/3” Progressive CMOS (Approx. 2.1 mega)
】
【1
3G/HD-SDI
【3】
HDMI
【4】
【
】
2
SDI Out
【1】
MAIN I/O
【2】
POWER LED
I/O
【3】
【4】
HDMI
OSD Control
MAIN I/O
RS-485
AUDIO
12VDC
How to Change a Fixed Focal Lens
1. Please check whether lens mount type is a M12 mount.
2. Spring washer is to be inserted between a lens and a mount.
3. Go to the camera setup and set the LENS mode as ESC.
Fixed Focal Lens
M12 mount
Scanning System 16:9 Progressive
Sync. System Internal
Sensor
Effective Pixel 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Horizontal Resolution 1,000TVL
Optics Lens Fixed HD lens
Back Light Compensation
Exposure Auto / Manual
White Balance
Functions
Day & Night System AGC / TDN
Electronic Shutter
Functions
SDI (BNC)
Video
Output
HDMI (HDMI Type A)
Audio
MIC Input
Input
Control RS-485
Operation Temperature -10℃ ~ 50℃
Power Input 12VDC (7VDC to 15VDC)
General
Power consumption Max 6W
Dimensions
Net Weight
WDR/BLC
HLC (High Light compensation)
Auto (3,000°K~8,000°K)
ATW (1,900°K~11,000°K)
Manual
NTSC: 1/30~1/30000
PAL: 1/25~1/30000
DSS ( ~X64)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
720p@25/30
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75Ω, Unbalanced Generator (Single-Ended)
1.3 compliant (Embedded Audio)
HDMI
1920x1080i@50/60 or 59.94
1920x1080p@25/30 or 29.97
1280x720p@50/60 or 59.94
1280x720p@25/30
Mic Level (1Vrms). 2.5V Mic bias
Bit Depth: 16,20,24,32Bits. 48KHz sample rates
Gain : -12dB ~ 59.5dB
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
36(W) x 36(H) x 45(D)mm
Approx. 140g (With Lens)
Dimensions
36mm
36mm
Spring Washer
SPECIFICATIONS
(ICR)
60.0mm
Marshall Electronics
HD-SDI 1080p Camera Setup: CV505-M, CV505-MB
the range of 1,900K to 11,000K.
This level is threshold for switching day to night. It is same as the exposure gain level.
HALF: The camera will correct the blurness due to vibra ons caused by hand shake.
SETUP SUB MENU SUB MENU DESCRIPTION
LENS
WB
CONTROL
AE CONTROL
(EXPOSURE)
BACK LIGHT
DAY/NIGHT
IMAGE
STABILIZER
AUDIO
IMAGE
CONTROL
DISPLAY
CONTROL
RESET Reset the camera se
EXIT Exit the setup.
ESC IRIS is fixed. Shu
DC IRIS Controls exposure automa
AUTO Color temperature is automa
ATW
PUSH
MANUAL
BRIGHTNESS 0~20 Adjust the screen brightness. The bright control func
AGC LIMIT 0~20
SHUTTER
DSS (SENS-UP) OFF, x2~64 When luminance condi
BACK LIGHT
ACE LOW, MIDDLE, HIGH Brightness correc
ECLIPSE
AUTO
COLOR The camera keeps color mode constantly.
NIGHT The camera keeps black/white mode constantly.
RANGE 10%, 20%, 30%
FILTER LOW, MIDDLE, HIGH Select the level of correc
AUTO C OFF, HALF, FULL
AUDIO LEVEL 0~143 Enabled when AUDIO AGC is set OFF. Adjust the audio level manually.
AUDIO AGC OFF, ON Automa
AGC MAX 0~119 Enabled when AUDIO AGC is set ON. Set the maximum level of AUDIO AGC.
SAMPLE BITS 16, 20, 24, 32 BITS Select the bit depth of audio.
COLOR LEVEL 0~20 Adjust the color level value for a fine color tune.
SHARPNES
FRAME RATE Change video output format.
CAM VERSION Display the firmware version of the camera.
CAM TITLE The camera
BAUDRATE Set the baudrate of RS-485 communica
LANGUAGE Select the menu language.
S 0~20 Adjust the sharpness of the image. As you increase this value, the picture outline becomes stronger a
MIRROR Video output is rotated horizontally.
FLIP Video output is rotated ver
D-ZOOM 1.0X ~ 16.0X Enlarge digitally the video output up to 16X.
DEFOG
DNR OFF, LOW, MIDDLE, HIGH This feature will reduce the video noise at low ambient light.
MOTION This feature will observe the object movement by mo
SHADING This feature will correct the inconsistent brightness level in the image.
GAMMA This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).
PRIVACY Mask an area you want to hide on the screen with sub menu.
CAM ID 0~255 Select the camera ID number for RS-485 communica
COLOR TEMPERATURE Select color temperature from LOW, MIDDLE, or HIGH.
RED GAIN Adjust the Red tone level manually. Adjust the red tone of the image (0~20).
BLUE GAIN Adjust the Blue tone level manually. Adjust the Blue tone of the image (0~20).
AUTO Shu
MANUAL Shu
FLICKERLESS Use this func
WDR Enable user to view both object and background more clearly when background is too bright. (LOW, MIDDLE, HIGH).
BLC Enable a back light compensa
SPOT Enables a user to select a desired area on a picture and view that area more clearly when background is too bright.
LEVEL Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).
COLOR Select the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)
ANTI-SAT.
AGC LEVEL
AGC MARGIN Set the margin between Day →Night switching level and Night →Day switching level.
DWELL TIME Select the checking
AUTO This feature will help increase visibility in extreme weather condi
MAN
UAL Set the level of defoging func
Con
nuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within
Color temperature will be manually adjusted by pushing the OSD bu
obtain the op
A func
on which controls the amplifica on/gain process automa cally if the illumina on falls under the usable level. Camera raises up gain to
selected gain limit when dark condi
er controls exposure automa cally when IRIS is manual. Shu er control has the exposure control priority
er speed is fixed. The exposure control priority is given to other resources.
Adjust the an
by the IR or light in Night mode.
The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumina
This func
The image will be digitally zoomed in to compensate the shi
OFF: Disable the auto centering func
FULL: The camera will correct the blurness due to vibra
on will reduce image blurriness due to vibra ons caused by hand shake or Pan/Tilt opera on.
cally adjusts the MIC gain as the input signal becomes overly loud or very weak.
er controls exposure automa cally if shu er is set as auto.
mum result.
on when you experience picture flicker, this happens when there is a conflict with the installed ligh ng frequency.
-satura on level manually. This feature will reduce the satura on phenomenon in which part of the camera receiving the light affected
tle can be entered and it will appear over the video output.
cally.
cally adjusted to 3,000°K ~ 8,000°K
on. Place the white paper in front of the camera when OSD bu on is pressed to
on adjusts gain and iris, to keep a brightness level.
ons.
on is low, DSS can adjust the picture quality by maintaining the light level. Minimum slow shu er limit is down to x64.
on feature.
on of the dark image area.
on become this pre-set level.
me of light condi on to confirm to chage from the day mode to the night mode.
on hold filter for the worst case of image. HIGH: Less image correc on. Low: More image correc on.
ngs to the factory defaults.
on.
cally.
on (LOW, MIDDLE, HIGH).
on (2400, 4800, 9600, 19200, 38400, 57600, 115200).
ed pixels.Set the digital zoom level for image stabilizing. (Max. 30% : x1.4 Digital Zoom)
ons caused by both hand shake or Pan/Tilt opera on.
nd clearer.
ons, such as fog, rain or in a very strong luminous intensity.
on zone and sensi vity that are pre-set with sub menu.
on.
Design and specications are subject to change without notice.
Marshall Electronics
Loading...