Page 1
CV343-CSB/CS Quick Start Guide
LCDracks.com
Full-HD (3G-SDI) Compact Broadcast
POV Camera (CS mount)
Precautions
Do not use the camera if fume s, smoke or a strange odor is emi tted
!
WARNING
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
CAUTIO N
from the unit, or if it seems to no t function correctly. Discon nect the
power source immediatel y and consult your supplier.
Always follow the instru ctions in the installatio n guide when
applying power. Fire and equi pment damage can occur if pow er
is applied incorrec tly. For the correct power supply, refer to the
Do not install or operate i n small, unventilated areas. He at build up
To prevent damage, do not drop th e camera or subject it to strong
shock or vibration.
If installed close to a TV, radio transmit ter, magnet, electric motor
interfere with or disto rt the image.
Whether or not the camera is use d outdoors, never point it to ward
the sun. Use caution when ope rating the camera in the vicinit y of spot
Do not use the camera in ex treme environments whe re high
temperatures or high hu midity exists. Use th e camera under
conditions where tempe ratures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is b elow 90%.
Features
· 2.5 Megapixel 1/3-inch CMOS Progressive Scan Sensor
· CS/C Mount with DC-Auto Iris (lens sold separately)
· C343-CSB: 1920x1080p59.94/29.97, 1920x1080i59.94,
1280x720p59.94/29.97fps
· CV343-CS: CV343-CS: 1920x1080p60/50/30/25,
1920x1080i60/50, 1280x720p60/50/30/25fps
· 3G/HD-SDI (BNC) & CVBS (BNC) built into rear panel
· New WDR function supports high speed & high sensitivity
to various light sources
· OSD Menu Joystick, RS-485 connectable (Pelco/Visca)
· Stepped (Red/Blue) Gain Control, Gamma, and Shutter adjust
· 12VDC
Rear Panel Video/Power Connection Specifications
【1
】 【
】
【3】
2
【1】OSD Control
【2】CVBS Out
【4】
SDICVBS
【3】SDI Out
【4】POWER LED
【5】12VDC
【6】RS-485
【7】IRIS Port
+ -
+ -
12VDC RS-485
【5】
【6】
IRIS
【7】
Manual IRIS Lens Connection
1. Please check whether lens mount type is C mount or CS mount.
2. CS mount type: Mount the lens after removing the rubber cap.
C mount type: Attach the C mount ring and mount the lens.
3. Go to the camera setup and set the LENS mode as ESC.
C mount ring
CS mount
Auto IRIS Lens Connection
1. Mount the lens as described in the manual lens connection.
2. Connect the auto IRIS lens connector to the IRIS port on the the
rear panel.
3. Go to the camera setup and set the LENS mode as DC IRIS
C mount ring
CS mount
Sensor
Optics Lens C/CS Mount, DC-IRIS
Functions
Video
Output
Control RS-485
General
CV343
Image Sensor 1/3” Progressive CMOS (Approx. 2.1 mega)
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Horizontal Resolution 1,000TVL
WDR/BLC
Back Light Comp
Exposure Auto / Manual
White Balance
Day & Night System AGC
Electronic Shutter
Functions
SDI (BNC)
CVBS (BNC) Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL
Operation Temperature -10℃ ~ 50℃
Power Input 12VDC (7VDC to 15VDC)
Power consumption Max 6W
Dimensions (W X H X D) 60 X 60 X 56mm / 2.36 X 2.36 X 2.20Inches
Net Weight Approx. 160g/0.35Lbs (Without Lens)
ensation
HLC (High Light compensation)
Auto (3,000°K~8,000°K)
ATW (1,900°K~11,000°K)
Manual
NTSC: 1/30~1/30000
PAL: 1/25~1/30000
DSS ( ~X64)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
720p@25/30
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75Ω, Unbalanced Generator(Single-Ende
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
Dimensions
IRIS Port
56
/ TDN (ICR)
SPECIFICATIONS
+ -
+ 12VDC RS-485
60
d)
SDICVBS
IRIS
60
Marshall Electronics
Page 2
HD-SDI 1080p Camera Setup: CV343-CS, CV343-CSB
SETUP SUB MENU SUB MENU DESCRIPTION
LENS
WB
CONTROL
AE CONTROL
(EXPOSURE)
BACK LIGHT
DAY/NIGHT
IMAGE
STABILIZER
IMAGE
CONTROL
DISPLAY
CONTROL
RESET Reset the camera se
EXIT Exit the setup.
ESC IRIS is fixed. Shu
DC IRIS Controls exposure automa
AUTO Color temperature is automa
ATW
PUSH
MANUAL
BRIGHTNESS 0~20 Adjust the screen brightness. The bright control func
AGC LIMIT 0~20
SHUTTER
DSS (SENS-UP) OFF, x2~64 When luminance condi
BACK LIGHT
ACE LOW, MIDDLE, HIGH Brightness correc
ECLIPSE
AUTO
COLOR The camera keeps color mode constantly.
NIGHT The camera keeps black/white mode constantly.
RANGE 10%, 20%, 30%
FILTER LOW, MIDDLE, HIGH Select the level of correc
AUTO C OFF, HALF, FULL
COLOR LEVEL 0~20 Adjust the color level value for a fine color tune.
SHARPNESS 0~20 Adjust the sharpness of the image. As you increase this value, the picture outline becomes stronger and clearer.
MIRROR Video output is rotated horizontally.
FLIP Video output is rotated ver
D-ZOOM 1.0X ~ 16.0X Enlarge digitally the video output up to 16X.
DEF
OG
DNR OFF, LOW, MIDDLE, HIGH This feature will reduce the video noise at low ambient light.
MOTION This feature will observe the object movement by mo
SHADING This feature will correct the inconsistent brightness level in the image.
GAMMA This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).
FRAME RATE Change video output format.
CAM VERSION Display the firmware version of the camera.
CAM TITLE The camera
PRIVACY Mask an area you want to hide on the screen with sub menu.
CAM ID 0~255 Select the camera ID number for RS-485 communica
BAUDRATE Set the baudrate of RS-485 communica
LANGUAGE Select the menu language.
COLOR TEMPERATURE Select color temperature from LOW, MIDDLE, or HIGH.
RED GAIN Adjust the Red tone level manually. Adjust the red tone of the image (0~20).
BLUE GAIN Adjust the Blue tone level manually. Adjust the Blue tone of the image (0~20).
AUTO Shu
MANUAL Shu
FLICKERLESS Use this func
WDR Enable user to view both object and background more clearly when background is too bright. (LOW, MIDDLE, HIGH).
BLC Enable a back light compensa
SPOT Enables a user to select a desired area on a picture and view that area more clearly when background is too bright.
LEVEL Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).
COLOR Select the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)
ANTI-SAT.
AGC LEVEL
AGC MARGIN Set the margin between Day →Night switching level and Night →Day switching level.
DWELL TIME Select the checking
AUTO This feature will help increase visibility in extreme weather condi
MANUAL Set the level of defoging func
nuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within
Con
the range of 1,900K to 11,000K.
Color temperature will be manually adjusted by pushing the OSD bu
obtain the op
on which controls the amplifica on/gain process automa cally if the illumina on falls under the usable level. Camera raises up gain to
A func
selected gain limit when dark condi
er controls exposure automa cally when IRIS is manual. Shu er control has the exposure control priority
er speed is fixed. The exposure control priority is given to other resources.
Adjust the an
by the IR or light in Night mode.
The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumina
This level is threshold for switching day to night. It is same as the exposure gain level.
This func
The image will be digitally zoomed in to compensate the shi
OFF: Disable the auto centering func
FULL: The camera will correct the blurness due to vibra
HALF: The camera will correct the blurness due to vibra
on will reduce image blurriness due to vibra ons caused by hand shake or Pan/Tilt opera on.
er controls exposure automa cally if shu er is set as auto.
mum result.
on when you experience picture flicker, this happens when there is a conflict with the installed ligh ng frequency.
-satura on level manually. This feature will reduce the satura on phenomenon in which part of the camera receiving the light affected
tle can be entered and it will appear over the video output.
cally.
cally adjusted to 3,000°K ~ 8,000°K
on. Place the white paper in front of the camera when OSD bu on is pressed to
on adjusts gain and iris, to keep a brightness level.
ons.
on is low, DSS can adjust the picture quality by maintaining the light level. Minimum slow shu er limit is down to x64.
on feature.
on of the dark image area.
on become this pre-set level.
me of light condi on to confirm to chage from the day mode to the night mode.
on hold filter for the worst case of image. HIGH: Less image correc on. Low: More image correc on.
on.
cally.
on (LOW, MIDDLE, HIGH).
on (2400, 4800, 9600, 19200, 38400, 57600, 115200).
ngs to the factory defaults.
ed pixels.Set the digital zoom level for image stabilizing. (Max. 30% : x1.4 Digital Zoom)
ons caused by both hand shake or Pan/Tilt opera on.
ons caused by hand shake.
ons, such as fog, rain or in a very strong luminous intensity.
on zone and sensi vity that are pre-set with sub menu.
on.
Design and specications are subject to change without notice.
Marshall Electronics
Loading...