Page 1
Page 2
MENU STRUCTURE
LENS
EXPOSURE
BACKLIGHT
WHITE
BALANCE
DAY
&
NIGHT
NR
1080 HD-SDI Camera
DC
VIDEO
MANUAL
P-IRIS
SHUTTER
SENSE-UP
BRIGHTNESS
D-WDR
DEFOG
WDR GAIN, PRIORITY
BLC
HSBLC
ATW
AWB
AWC-SET
INDOOR
OUTDOOR
MANUAL
AUTO
COLOR
B/W
EXT
2DNR
3DNR
MODE: OUTDOOR, INDOOR, LENS: ADJUST
MODE: AUTO, MANUAL
LEVEL
LIMIT
1/30~60, FLK, 1/240, 480, 1000, 2000, 5000,
10000, 50000, X2~30, AUTO
1~15AGC
AUTO (x2~x30), OFF
1~100
OFF, ON
OFF, ON
POSITION/SIZE, GRADATION, DEFAULT
GAIN, AREA, DEFAULT
AREA, DISPLAY, LEVEL,
MODE, BLACK MASK, DEFAULT
BLUE: 1~100, RED: 1~100
DELAY
N D (AGC)
N D (AGC)
BURST: ON, OFF
IR SMART: ON, OFF
IR LED: ON, OFF
IR PWM: 0~100
ON, OFF
ON, OFF
LEVEL: 0~100
START. AGC: 0~100
END. AGC: 0~100
2
Page 3
MENU STRUCTURE
SPECIAL
ADJUST
RESET
EXIT
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS-485
VERSION
SHARPNESS
MONITOR
LSC
VIDEO. OUT
RESOLUTION 1080P, 720P
PRAME RATE
FREEZE
MIRROR: MIRROR, V-FLIP, ROTATE
D-ZOOM
SMART D-ZOOM (Function disabled.)
NEG.IMAGE
DIS (Function disabled.)
SELECT: AREA
DISPLAY: ON, OFF
SENSIVITY: 0~100
MOTION VIEW: ON, OFF
DEFAULT
SELECT: AREA
DISPLAY: COLOR
COLOR
TRANS.
DEFAULT
LIVE DPC: OFF, AUTO, ON
STATIC DPC: OFF, ON
CAM ID: 0~255
ID DISPLAY: OFF, ON
BAUD RATE: 2400~38400
0~15
LCD: GAMMA, ADAPT, LEVEL, BLUE/RED GAIN
CRT: BLACK LEVEL, BLUE/RED GAIN
OFF, ON
NTSC, PAL
1080P: B-30/25P, A-30/25P, A-60/50P, 59.94I
720P: B-30/25P, 59.94P
3
1080 HD-SDI Camera
Page 4
OSD Joystick and Button
OSD
SET Used to access the menu and confirm selection.
Used to move the cursor up.
UP
DOWN
Used to move the cursor down
Used to move the cursor to left and change the value.
LEFT
RIGHT
Used to move the cursor to right and change the value.
Press SET button to access the MAIN MENU.
Select each sub-menu by using the UP, DOWN, LEFT, and RIGHT buttons.
Use the UP & DOWN buttons
to select the desired item.
1080 HD-SDI Camera
Press the SET button to select.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
Icon indicates “Press OSD Button” or “Enter Sub Menu”.
Icon indicates “Not Available”.
DC
Use the LEFT & RIGHT buttons
OFF
ATW
AUTO
to change the sub-item.
4
Page 5
LENS MANUAL, DC, VIDEO, P-IRIS
Select LENS using the UP or DOWN button.
You can change between MANUAL, DC, VIDEO, and P-IRIS using the LEFT or RIGHT button.
MANUAL: Manual Lens (Fixed focal or fixed IRIS lens)
DC: DC Auto Iris Varifocal Lens.
You can change the DC mode between INDOOR and OUTDOOR mode using the LEFT or RIGHT button.
MODE: INDOOR, OUTDOOR
ADJUST: Activates the automatic lens adjustment function.
VIDEO: Auto Iris Varifocal Lens.
P-IRIS: P-IRIS Lens
and depth of field and keeps the best image quality at different environment of light source.
You can change the mode between AUTO and MANUAL mode using the LEFT or RIGHT button.
MODE: MANUAL, AUTO
LEVEL, LIMIT: Set the level and limi of P-IRIS lens adjustment function.
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
(helps to improve the image quality with regards to iris contrast, resolution
MAIN MENU
DC
OFF
ATW
AUTO
DC LENS MODE
1. MODE INDOOR
2. ADJUST ADJUST
3. RETURN RET
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
P-IRIS
OFF
ATW
AUTO
P-IRIS MODE
1. MODE AUTO
2. LEVEL _ _ _
3. LIMIT IIIIIIIIIIIIIIII 120
4. RETURN RET
5
1080 HD-SDI Camera
Page 6
EXPOSURE SHUTTER
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG menu using
the UP or DOWN button.
SHUTTER: You can adjust the shutter speed of the lens.
You can adjust the shutter speed manually or select shutter speed mode from FLK or AUTO
mode using the LEFT or RIGHT button.
FLK: Select this when you experience picture flicker, this happen when
there is a clash with the installed lighting frequency.
AUTO: Enable AUTO to control the shutter speed automatically. If AUTO
is selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
1/60sec ~ 1/50,000sec, x2~x30: You can control shutter speed manually
using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
OFF
ATW
AUTO
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG OFF
7. RETURN RET
■ If the shutter mode is set to AUTO, carefully position the camera during installation since
the produced image might be poorly framed due to a bright light source.
■ When the SHUTTER is set to FLK mode, 1/240 ~ 50,000, or x2~x30, SENS-UP will be
disabled.
1080 HD-SDI Camera
6
Page 7
EXPOSURE AGC
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG menu using
the UP or DOWN button.
AGC(AUTO GAIN CONTROL): A function which controls the amplification/
gain process automatically if the illumination falls under the usable level.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
OFF
ATW
AUTO
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG OFF
7. RETURN RET
7
1080 HD-SDI Camera
Page 8
EXPOSURE SENS-UP
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG menu using
the UP or DOWN button.
SENS-UP: When it is in low luminance condition, the camera automatically
detects the light level and maintains a clear picture quality if this mode is activated.
You can select the sense-up mode from OFF or AUTO mode using the LEFT or RIGHT button.
OFF: Deactivates the SENS-UP function.
AUTO: Activates the SENS-UP function.
x2~x30: You can select SENS-UP level using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
OFF
ATW
AUTO
■ Ghosting in object movements may occur if the sens-up is set to higher level.
1080 HD-SDI Camera
8
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG OFF
7. RETURN RET
SENS-UP
1. SENS-UP x8
2. RETURN RET
Page 9
EXPOSURE BRIGHTNESS, D-WDR
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG menu using
the UP or DOWN button.
BRIGHTNESS: Adjust the screen brightness.
You can adjust the brightness level from 1 ~ 100 using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
OFF
ATW
AUTO
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG OFF
7. RETURN RET
■ Higher BRIGHTNESS setting may cause noise, spots, or white image.
D-WDR : DWDR(ACCE) illuminates darker areas of an image while
retaining the same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark areas.
You can select the DWDR level from OFF and ON using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
OFF
ATW
AUTO
9
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG OFF
7. RETURN RET
1080 HD-SDI Camera
Page 10
EXPOSURE DEFOG
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG menu using
the UP or DOWN button.
DEFOG: DEFOG feature will help increase visibility in extreme weather conditions,
such as fog, rain or in a very strong luminous intensity.
You can select the DEFOG level from OFF and ON using the LEFT or RIGHT button.
POS / SIZE: Adjujst the position and size of the DEFOG function.
GRADATION: Adjujst the gradation level of the DEFOG function.
DEFAULT: Reset the DEFOG function.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DEFOG
1. POS / SIZE
2. GRADATION OFF
3. DEFAULT
4. RETURN RET
1080 HD-SDI Camera
DC
OFF
ATW
AUTO
EXPOSURE
1. SHUTTER AUTO
2. AGC IIIIIIIIIIIIIII15
3. SENS-UP AUTO
4. BRIGHTNESS IIIIIIIIIIIIIII25
5. D-WDR OFF
6. DEFOG ON
7. RETURN RET
POSITION
10
Page 11
BACKLIGHT BLC
Select BACKLIGHT using the UP or DOWN button.
You can select OFF, BLC, or HSBLC menu using the LEFT or RIGHT button.
BLC: Enables a user to select a desired area on a picture and view that
area more clearly.
GAIN: Adjust level of the BLC function.
You can select the GAIN level from LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
AREA: Select the area to be enhanced.
You can select the BLC area using the UP, DOWM, LEFT or RIGHT button.
DEFAULT: Set the BLC setting value as default.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
BLC
1. GAIN MIDDLE
2. AREA
3. DEFAULT
4. RETURN RET
■
BACKLIGHT
function will help distinguish an object in front of the strong background lighting.
DC
BLC
ATW
AUTO
1. GAIN LOW
2. AREA
3. DEFAULT
4. RETURN RET
11
BLC
POSITION
1080 HD-SDI Camera
Page 12
BACKLIGHT HSBLC
HSBLC: If the scene contains extremely bright light areas such as; from
car headlight, the light can mask out much of the on-screen detail.
SELECT: Select the area to be enhanced (AREA1, AREA2, AREA3, AREA4)
DISPLAY: Display the zone or not and adjust the size and position.
POSITOIN: Adjust the position.
SIZE : Adjust the size.
LEVEL: Adjust level of the HLC function.
MODE: Select the HSBLC mode from NIGHT and ALL DAY.
BLACK MASK: Enable/Disable BLACK MASK function.
DEFAULT: Set the HSBLC setting value as default.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
HSBLC
ATW
AUTO
HSBLC
1. SELECT AREA1
2. DISPLAY ON
3. LEVEL IIIIIIIIIIIIIIII20
4. MODE ALL DAY
5. BLACK MASK ON
6. DEFAULT
7. RETURN RET
HSBLC
1. SELECT AREA
2. DISPLAY ON
3. LEVEL IIIIIIIIIIIIIIII20
4. MODE ALL DAY
5. BLACK MASK ON
6. DEFAULT
7. RETURN RET
POSITION
■ Because there can be a difference in the effectiveness of HSBLC according to the amount of light area
in the screen, optimize the installation angle for the best HSBLC performance.
■ HSBLC is only activated in low luminance condition if a bright area exceeds a designated size.
■ HSBLC is not activated in day light or when bright light is not present at night.
1080 HD-SDI Camera
12
Page 13
WHTE BALANCE
Select WHITE BALANCE using the UP or DOWN button.
You can change the white balance mode between ATW, AWC SET, INDOOR, OUTDOOR, AWB,
or MANUAL using the LEFT or RIGHT button.
ATW (Auto Trace White Balance): continuously adjusts camera color balance in
accordance with any change in color temperature. compensates for color temperature
changes within the range of 2000K to 10000K.
AWC SET: The white balance is automatically adjusted in a specific luminance
environment. To find the optimal luminance level for the current environment, point
the camera towards a shoot of white paper and press the SET button.
INDOOR: Select this when the color temperature is between 4,500˚K and 8,500˚K.
OUTDOOR: Select this when the color temperature is between 1,700˚K and 11,000˚K.
(Ex. sodium light inclusion)
AWB (Auto White Balance): controls the automatic adjustment of the light source’s
color temperature.
MANUAL: Select this to fine-tune White Balance manually.
You can adjust the blue and red tone level manually.
BLUE: Adjust the blue tone of the image. (0~100)
RED: Adjust the red tone of the image. (0~100)
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
MANUAL
AUTO
MANUAL WB
1. BLUE IIIIIIIIIIIII50
2. RED IIIIIIIIIIIII50
3. RETURN RET
■ Set White Balance first by using the ATW or AWB mode. After that switch to MANUAL mode,
■ White Balance may not work properly under the following conditions. In this case, select the AWC mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes
dramatically, the White Balance operation may become unstable.
13
1080 HD-SDI Camera
Page 14
DAY & NIGHT COLOR, B/W
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.
BURST: Determines whether to transmit the burst signal or not .
IR SMART: Decrease screen saturation of objects within a short range.
LEVEL: Adjust level of the IR SMART function.
AREA: Select the area to activate the IR SMART.
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.
IR LED: Enable/Disable IR LEDs.
IR PWM: Adjust the IR LEDs output level.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
IR SMART
1. LEVEL IIIIIIIIIIIIIIII 5
2. AREA
3. RETURN RET
DC
HSBLC
ATW
B/W
DAY & NIGHT
1. BURST OFF
2. IR SMART ON
3. IR LED ON
4. IR PWM IIIIIIIIIIIIIIII O
5. RETURN RET
POSITION
1080 HD-SDI Camera
14
Page 15
DAY & NIGHT
AUTO, EXT
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
AUTO: The mode is switched to COLOR in a normal environment, but switched
to B/W mode when ambient illumination is low.
DELAY: You can select day/night switching delay time from. (0s ~ 60s)
D N (AGC): Adjust the brightness of the lighting where the mode switch
occurs from day to night.
N D (AGC): Adjust the brightness of the lighting where the mode switch
occurs from night to day.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
D & N AUTO
1. DELAY IIIIIIIIIIIII 3
2. D N (AGC) IIIIIIIIIIIII 69
3. N D (AGC) IIIIIIIIIIIII 55
4. RETURN RET
EXT: Control the image modes of Color and B/W when an external controller is
synchronized via the D&N IN In port.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
ATW
EXT
DC
BLC
1. DELAY IIIIIIIIIIIII 3
2. EXT ACTIVITY LOW
4. RETURN RET
EXT
15
1080 HD-SDI Camera
Page 16
NR (Noise Reduction) 2 DNR, 3 DNR
Select NR (NOISE REDUCTION) using the UP or DOWN button
You can move the menu from 2DNR and 3DNR and set each menu using the LEFT or RIGHT
button.
2DNR: Reducing noise in the brightness of the image.
3DNR: Reducing noise causing by movement.
SMART NR: Automatically activates 3DNR according to environment and preset.
SENSITIVITY: Adjust the sencivity of 3DNR level.
LEVEL: Adjust 3DNR level.
START. AGC: Set the start level of 3DNR function.
END. AGC: Set the end level of 3DNR function.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
HSBLC
ATW
B/W
2D & 3D NR
1. 2 DNR ON
2. 3 DNR ON
3. RETURN RET
3 DNR
1. SMART NR ON
2. LEVEL IIIIIIIIIIIIIIIIIII 80
3. START. AGC IIIIIIIIIIIIIIIIIII 0
4. END. AGC IIIIIIIIIIIIIIIIIII 100
RETURN RET
■ When adjusting the noise reduction level in the NR mode, remember that the higher the level set,
the more the noise level will be reduced, as will the brightness of the image.
1080 HD-SDI Camera
16
3 D SMART NR
1. SENSITIVITY IIIIIIIIIIIIIIIIIII 80
2. RETURN RET
Page 17
SPECIAL
CAM TITLE
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
CAM TITLE: If you enter a title, the title will appear on the monitor.
You can input the camera title from the virtual keyboard using the LEFT, RIGHT, UP, DOWN, and
SET button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
SPECIAL
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ▶ → ← ↑ ↓ ( )
¯ - _ ■ / = & : ~ , .
→ ← CLR P OS END
- - - - - - - - - - - - - - -
17
1080 HD-SDI Camera
Page 18
SPECIAL D-EFFECT
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
D-EFFECT
You can select the digital effect mode from FREEZE, MIRROR, D-ZOOM, and NEG.IMAGE
using the UP or DOWN button.
FREEZE: You can stop the image or reactivate it.
MIRROR: You can adjust or rotate the picture vertically and or horizontally.
You can select MIRROR, V-FLIP, and ROTATE using the LEFT or RIGHT button.
D-ZOOM: You can use a digital zoom of X 1 ~ X 62.
Select ON using LEFT and RIGHT button and press SET button to display the DIGITAL
ZOOM menu .
NEG. IMAGE: You can flip the color on screen.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
SPECIAL
AUTO
10
1. FREEZE OFF
2. MIRRIOR OFF
3. D-ZOOM ON
4. SMART-D-ZOOM - - -
5. NEG. IMAGE OFF
6. DIS - - -
7. RETURN RET
1080 HD-SDI Camera
D-EFFECT
D-ZOOM
1. D-ZOOM X 2 . 2
2. PAN & TILT - - -
3. DEFAULT
4. RETURN RET
18
Page 19
SPECIAL
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
MOTION: This product has a feature that allows you to observe the object movement,
and display <MOTION> indicator on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, SENSIVITY, MOTION VIEW, \
and DEFAULT using the UP or DOWN button.
SELECT AREA: You can select up to 3 motion detection areas.
You can select the motion detection area using the LEFT or RIGHT button.
DISPLAY: Adjust the size and position of the selected area.
Select ON using LEFT and RIGHT button and press SET button to display the motion zone.
- POSITOIN: Adjust the position.
- SIZE: Adjust the size.
SENSITIVITY: Adjust the sensitivity of the motion detection.
You can select the motion detection zone color using the LEFT or RIGHT button.
MOTION VIEW: You can select ON to display the motion detection.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
SPECIAL
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION ON
4. PRIVACY OFF
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
MOTION
1. SELECT AREA 1
MOTION
2. DISPLAY ON
3. SENSITIVITY IIIIIIIIIIIII 31
4. MOTION VIEW OFF
5. DEFAULT
6. RETURN RET
19
POSITION
1080 HD-SDI Camera
Page 20
SPECIAL PRIVACY
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
PRIVACY: Task an area you want to hide on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, COLOR, TRANS., and DEFAULT
using the UP or DOWN button.
SELECT: You can select up to 8 PRIVACY areas.
You can select the privacy area using the LEFT or RIGHT button.
DISPLAY: Adjust the size and position of the selected area.
You can select privacy area menu from OFF, INV., MOSAIC, COLOR using the LEFT or
RIGHT button and press SET button to display the privacy zone.
- POSITOIN: Adjust the position
- SIZE: Adjust the size.
COLOR: Determine area color. You can select 16 different colors.
You can select privacy area color from 0 to 15 using the LEFT or RIGHT button.
TRANS.: Adjust the transparancy of the selected pravacy area.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
SPECIAL
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION OFF
4. PRIVACY ON
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
OFF
OFF
1. SELECT AREA 1
2. DISPLAY COLOR
3. COLOR 2
4. TRANS. 3
5. DEFAULT
6. RETURN RET
1080 HD-SDI Camera
PRIVACY
POSITION
20
Page 21
SPECIAL
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
LANGUAGE, RS485
LANGUAGE: You can select the menu language according to your requirements.
You can select the language from ENG, JPN, CHN1, CHN2, KOR, GER, FRA, ITA, SPA, POL, RUS,
POR, NED, TUR, HEB, and ARB using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
RS-485: Using RS-485 communication, the camera menu can be accessed using
System Controller or the DVR (Other Equipment).
CAM ID: You can select a camera ID from 0 to 254.
You can select the camera ID using the LEFT or RIGHT button.
ID DISPLAY:
BAUD RATE: You can select a baud rate.
Select ON to display the camera ID.
DC
BLC
ATW
AUTO
SPECIAL
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION ON
4. PRIVACY OFF
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
SPECIAL
1. CAMERA TITLE ON
2. D-EFFECT
3. MOTION ON
4. PRIVACY OFF
5. LANGUAGE ENG
6. DEFECT
7. RS485
8. VERSION 131021
9. RETURN RET
RS 485
1. CAM ID 1
2. ID DISPLAY OFF
3. BAUD RATE 19200
4. RETURN RET
21
1080 HD-SDI Camera
Page 22
SPECIAL DEFECT
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
DEFECT: Dead pixels consist of two types: static dead pixel and dynamic dead pixel.
The first can be found from the beginning while the second is found over time after
using sensors for a certain period of time. Dynamic dead pixels may not be visible on
the screen of ordinary illumination. However, they can be made visible by amplifying
the analog/digital gain. Dead pixel correction (DPC) corrects such defects.
You can select the defect correction mode from LIVE DPC and STATIC DPC using the UP or DOWN button.
LIVE DPC: Auto Dead pixel correction
LEVEL: Level of Auto Dead pixel correction
STATIC DPC: Manual Dead pixel correction
START: Start Dead pixel correction
LEVEL: Level of Manual Dead pixel correction
SENS-UP: Select Sens-Up Value
AGC: Select Sens-Up Value
1. LIVE DPC ON
2. STATIC DPC ON
3. RETURN RET
DEFECT
LIVE DPC
1. LEVEL IIIIIIIIIIIIIIIIII 80
2. RETURN RET
OFF
OFF
1. LIVE DPC ON
2. STATIC DPC ON
3. RETURN RET
1080 HD-SDI Camera
DEFECT
STATIC DPC
1. START
2. LEVEL IIIIIIIIIIIIIIIIII 10
3. SENS - UP X 8
4. AGC IIIIIIIIIIIIIIIIII 8
5. RETURN RET
22
Page 23
ADJUST
SHARPNESS, LSC, VIDEO OUT
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, LSC, VIDEO. OUT,
RECOLUTION, and FRAME RATE using the UP or DOWN button.
SHARPNESS: As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
You can adjust the SHARPNESS level using the RIGHT or LEFT button.
LSC: Lens shading compensation.
Select ON to activate the brightness compensation on the corner of lens.
You can select the LSC function from OFF and ON using the RIGHT or LEFT button.
VIDEO. OUT: Select video type from NTSC or PAL.
You can select the VIDEO OUT mode from NTSC and PAL using the RIGHT or LEFT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
23
1. SHARPNESS IIIIIIIIIIIIIII 10
2. MONITOR CRT
3. LSC OFF
4. VIDEO OUT NTSC
5. RESOLUTION 1080P
6. FRAME RATE B-30 / 25P
7. RETURN RET
1080 HD-SDI Camera
ADJUST
Page 24
ADJUST
MONITOR
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, LSC, VIDEO. OUT,
RECOLUTION, and FRAME RATE using the UP or DOWN button.
MONITOR: Choose the appropriate setting for your monitor.
You can select the monitor mode from LCD or CRT using the LEFT or RIGHT button.
LCD: Select this menu item when using an LCD monitor.
- GAMMA: Select and adjust the gamma level.
- ADAPT. LEVEL: Adjust the adaption level.
- BLUE GAIN: Adjust the Blue gain level.
- RED GAIN: Adjust the Red gain level.
CRT: Select this menu item when using an CRT monitor.
- BLACK: Adjust the contrast level.
- BLUE: Adjust the Blue gain level.
- RED: Adjust the Red gain level.
1. SHARPNESS IIIIIIIIIIIIIII 10
2. MONITOR LCD
3. LSC OFF
4. VIDEO OUT NTSC
5. RESOLUTION 1080P
6. PRAME RATE B-30 / 25P
7. RETURN RET
1. SHARPNESS IIIIIIIIIIIIIII 10
2. MONITOR CRT
3. LSC OFF
4. VIDEO OUT NTSC
5. RESOLUTION 1080P
6. PRAME RATE B-30 / 25P
7. RETURN RET
1080 HD-SDI Camera
ADJUST
ADJUST
1. GAMMA USER
2. ADAPT. LEVEL IIIIIIIIIIIIII 100
3. BLUE GAIN IIIIIIIIIIIIII 65
4. RED GAIN IIIIIIIIIIIIII 65
5. RETURN RET
1. BLACK LEVEL IIIIIIIIIIIIII + 0
2. BLUE GAIN IIIIIIIIIIIIII + 0
3. RED GAIN IIIIIIIIIIIIII + 0
4. RETURN RET
24
LCD
CRT
Page 25
ADJUST
RESOLUTION, PRAME RATE
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, LSC, VIDEO. OUT,
RECOLUTION, and FRAME RATE using the UP or DOWN button.
RESOLUTION: Select the resolution from 1080P or 720P.
You can select the RESOLUTION fron 1080P and 720P using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
1. SHARPNESS IIIIIIIIIIIIIII 10
2. MONITOR CRT
3. LSC ON
4. VIDEO OUT NTSC
5. RESOLUTION 1080P
6. FRAME RATE B-30 / 25P
7. RETURN RET
ADJUST
FRAME RATE: Select the frame rate.
B-30/25P, A-30/25P, A-60/50P, 59.94I (RESOLUTION is set as 1080P)
You can select the FRAME RATE using the LEFT or RIGHT button.
B-30/25P, 59.94P (RESOLUTION is set as 720P)
You can select the FRAME RATE using the LEFT or RIGHT button.
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
BLC
ATW
AUTO
1. SHARPNESS IIIIIIIIIIIIIII 10
2. MONITOR CRT
3. LSC ON
4. VIDEO OUT NTSC
5. RESOLUTION 1080P
6. FRAME RATE B-30 / 25P
7. RETURN RET
25
ADJUST
1080 HD-SDI Camera
Page 26
RESET
Select RESET using the UP or DOWN button.
RESET: Reset the camera settings to the factory defaults.
You can reset the camera setting using the SET button.
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
MAIN MENU
DC
BLC
ATW
AUTO
1. FACTORY RESET
2. RETURN RET
RESET
1080 HD-SDI Camera
26
Page 27
TROUBLE SHOOTING
PROBLEM SOUTION
Check that the power cord and line co nnection b etween the camera and
monitor are prop erly connected.
Check that vi deo cable is connected with the Analog BNC (Yellow).
When the cam era’s HD-SDI BNC outp ut is directly connected to the
Nothing appears on th e screen.
The image on the screen is dim.
The image on t he sc reen is dim, when
the LED is on.
The LEDs are r eflected over the
dome or cover.
The image on the screen is dark.
The camera is not working
properly, and the surface of th e
camera is hot.
The SENS-UP function does not
work.
The Motion Detection function
does not work.
Color is no t correct. Check the s etting of WHITE BAL SET UP menu .
The screen flickers continually.
monitor’ s BNC termi nal: Ma ke sure the monitor supports HD-SDI signal input.
When the cam era’s HD-SDI BNC outp ut is connected to t
sure the DVR supports HD-SDI signal input.
HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Mak e sure the converter’s HD-SDI input f ormat
Is lens stained with d irt? Clean yo ur lens with soft, clean clo th.
Set the monitor to the proper condition.
If the camera is exposed to very strong light, change the cam era p osition.
Re-ad just the back-
Check if the LEDs are s haded and reflected by the camera ring, camera base, or other
objects near the camera.
Check if the LEDs are s haded and reflected by the camera ring, camera base, or other obje
cts near t he ca mera.
Adjust the contrast feature o f t he m o
If there is an intermediate device, set 75Ω properly; Check the termination.
Check that yo u have prop erly connected the camera to an a ppropriate
power source.
Check that AG C of EXPOSURE SETUP menu is ‘OFF’.
Check that MOTION DET of SPECIAL SETUP m enu
Ensure the cam era is not pointing towards the sun.
Is the camera frami ng the sun or other bright light source?
If there is an intermediate device, set 75OΩ properly; Check the termination.
HD-SDI video may not appear to be normal if distance exceeds the
maximum transfer rable distance.
When a BNC cabl
e adaptor is used to combine two or more BNC cables
for distri buted HD-SDI vid eo t ransfer, make sure the impedance of the
adapt or is 75Ω. Ot herwise, it may cause s horter tra nsfer distance or
broke n vid eo transfer.
nitor.
he DVR: Mak e
is ‘OFF’.
27
1080 HD-SDI Camera
Page 28
Loading...