Marshall Electronics BC-0909-AD User Manual

Marshall Electronics

BC-0909-AD Universal Digital Converter Users Guide

Product Overview

1

7

The BC-0909-AD is a Universal Digital converter for analog HD (SMPTE-274M) YprPb to HDSDI or analog composite,
Y/C, or YUV to SDI with support of 480i, 576i, 720P, 1080P, and 1080i formats. The Analog to Digital conversion in
this module employs 12 bit sampling and 10 bit processing with 4x over sampling and an adaptive filter process.

2

Features

7

• Converts analog high definition Y-Pr-Pb (SOY) to HDSDI

• Converts analog composite (NTSC/PAL) to SDI

• Converts Y/C (S-Video) to SDI

• Converts analog component YUV (Y/R-Y/B-Y) to SDI

• Rotary switch for input signal type

• 10-bit processing with 4x over sampling

Electrical Specifications

3

7

Signal Input HD-15 (Analog component YPrPb that conforms to SMPTE-170M/274M/296M, or

Y/C that conforms to SMPTE-170M) via included RGB-5HD15-6 Break out cable.
BNC for analog composite that conforms to SMPTE-170M.

720 x 480-59.97i, 60i

Screen Formats

Signal Output BNC for HDSDI/SDI
Output Standards SMPTE-259M for SDI

System Sample Frequency
Dynamic gain/phase <0.4% / 0.4°
Y/C delay <2%/2°
Frequency Response -0.9db
Signal to Noise <57db
Differential gain/phase <0.5% / <0.7°
Input Cable length 1000ft (300m)

720 x 576-50i
1280 x 720-25p, 29.97p, 30p, 50p, 59.94p, 60p
1920 x 1080 - 23.98p, 23.98psF, 24p, 24psF, 25p, 29.97p, 30p, 50i, 59.94i, 60i

SMPTE-292M for HDSDI
110Mhz

4

Mechanical Specifications

7

Dimensions 4.75”W x 3.75”D x 1.0”H (120.65mm x 95.25mm x 25.4mm)
Approx. Weight 0.55 lbs
Power required 6V D.C. supplied from external supply

5

7

Included Accessories

•Power Supply (Class 2, (Model V-PS6-12A)

•RGB-5HD15-6 Break out cable

•Users Guide

•Wall Mount Brackets

•Foot Pads for desktop or stacking

6

7

Optional Accessories

A. 2 Module Rack Mount Kit (Model V-CRM2)
B. 3 Module Rack Mount Kit (Model V-CRM3)

A.

B.

Desktop Stand (Model V-CB1)

1910 East Maple Ave. El Segundo, CA 90245 • Tel.: [phone] • Fax:[phone] • www.LCDRacks.com • Email: [e-mail]

BC-0909-AD Universal Digital Converter Users Guide

Operational Setup

7

7

1. Unpack the BC-0909-AD and accompanying V-PS6-1.2A power supply. Physically inspect for any damage that may have occurred during ship­ping. Also verify there is a small package with mounting accessories. Should there be any damage, immediately contact Marshall Electronics at
800-800-6608. If you are not located within the continental united states call [phone].

2. Install in your desired location. If wall mounting is required, attach the mounting brackets by removing the Phillips head screws on the sides,
closest to the rear of the unit. (See Below) Only one screw per side should be removed.
Use the same screw to attach the bracket with the flange facing away from the side and parallel to the front of the BC-0909-AD metal case. The
flange has two holes. For desktop use, apply the supplied rubber pads.

3. Connect required cables for signal input and output.
Please note that power must be applied to the BC-0909-AD
for the HDSDI/SDI outputs to be activated. All BNC connectors

should be rated for 75Ω.

3. Plug the V-PS6-1.2A power supply into the A.C. source

4. Attach twist lock power connection from V-PS6-1.2A
power supply to the back of the unit.

5. Turn on the BC-0909-AD by depressing the power
switch located on the front of the unit.
Refer to section 6 picture for location of switch settings.

8

Input Connectors

7

Bracket Installation

Feet Installation

Table 1

Analog Signals Input

See Table 1

Composite Input

HDSDI or SDI out

9

Switch Settings & Indicators

7

6 VDC from

V-PS6-1.2A
power supply
Left Pin - Pos

Right Pin- Neg

Signal

Type

Pin1 Pr R-Y C
Pin2 Y Y Y
Pin3 Pb B-Y
Pin4

Pin5

Pin6 Ground Ground Ground
Pin7 Ground Ground Ground
Pin8 Ground Ground

Pin9

HD Analog

color difference

YPbPr

SD Analog color

difference
Y, R-Y, B-Y

S-Video

Y/C

10

Input Signal Format

7

Input Signal Format

Custom - not available
Composite Auto - Composite NTSC/PAL input, SDI output
S-Video Auto - S-Video (YC) NTSC/PAL input, SDI output
YPrPb Auto - Analog component HD input (1080i, 1080p, or 720p), HDSDI output

525i:60 - Analog component NTSC input, SDI output
625i:50 - Analog component PAL input, SDI output
720p:60 - Analog component 720p 60Hz input, HDSDI output
720p:50 - Analog component 720p 50Hz input, HDSDI output
720p:30 - Analog component 720p 30Hz input, HDSDI output
720p:25 - Analog component 720p 25Hz input, HDSDI output

11

Warranty

7

Marshall Electronics warranties to the rst consumer, that this BC-0909-AD Digital to Analog Converter will, under normal use be free from defects in workmanship and

materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a
warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.

This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modications in design or construction,

voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the
duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specications may change without notice.

1910 East Maple Ave. El Segundo, CA 90245 • Tel.: [phone] • Fax:[phone] • www.LCDRacks.com • Email: [e-mail]

Power On/Off indicator

1080i:60 - Analog component 1080i 60Hz input, HDSDI output
1080i:50 - Analog component 1080i 50Hz input, HDSDI output
1080PsF - Analog component 1080PsF 24Hz input, HDSDI output
1080p:30 - Analog component 1080p 30Hz input, HDSDI output
1080p:25 - Analog component 1080p 25Hz input, HDSDI output
1080p:24 - Analog component 1080p 24Hz input, HDSDI output

HD-15

BNC Breakout

Red

Green

Blue

Ground
Ground
Ground

07/13/2006