Installation and Initial Setup..................................................................................................................................................................................................................5
Connections and Power-On, and Initial Setup.............................................................................................................................................................. 5
Top and Front Panel Features...............................................................................................................................................................................................................6
Power Button ...............................................................................................................................................................................................................6
Menu Navigation Buttons.............................................................................................................................................................................................6
User-Definable Function Buttons.................................................................................................................................................................................. 6
LED Tally.....................................................................................................................................................................................................................6
HD-SDI Input and Output.............................................................................................................................................................................................7
Power Input..................................................................................................................................................................................................................7
RS-422/485 Serial Interface.........................................................................................................................................................................................7
MAIN MENU AND NAVIGATION.................................................................................................................................................................................9
Center Marker.......................................................................................................................................................................................................11
VIDEO CONFIGURATION SUBMENU....................................................................................................................................................................... 12
Aspect Ratio Settings............................................................................................................................................................................................13
SYSTEM CONFIGURATION SUBMENU................................................................................................................................................................... 15
User-Definable Function Buttons ..........................................................................................................................................................................15
Saving and Loading User Presets......................................................................................................................................................................... 15
Software Version Display......................................................................................................................................................................................15
Status Display.......................................................................................................................................................................................................16
LED Tally.............................................................................................................................................................................................................. 18
Anc. Time Code....................................................................................................................................................................................................18
IMD Group #......................................................................................................................................................................................................... 20
SERVICE SUBMENU.................................................................................................................................................................................................21
The V-R231-IMD-HDSDI is a full resolution 23” LCD monitor with an HD-SDI input and In-Monitor Display functionality – a
cost-effective "all-in-one" solution for post-production houses, broadcasters, and mobile units. This fully integrated
approach eliminates the need for additional or separate Under Monitor Displays and allows UMD information and tallies to
be displayed directly within a Marshall flat panel monitor. A variety of features are readily available including on-screen
Video Time Code, three-color "Soft" Tallies, Audio Presence Indicator, and a new RotoMenu™ feature that allows fast,
direct, and easy menu navigation.
The V-R231-IMD-HDSDI integrates easily with existing Tally systems and controllers, including Image Video, TSL, and
MEI protocols. This low profile unit benefits from low weight and power consumption when compared to similar CRT
products and separate Under Monitor Display configurations. The V-R231-IMD-HDSDI is a perfect solution for video
applications and systems.
The V-R231-IMD-HDSDI offers a single HDSDI/SDI input with active loop-through capability. Additional features include
ultra-wide viewing angles, adjustment settings memory, frame markers, Pixel-to-Pixel mode, Blue Only mode, and userdefinable function buttons. The V-R231-IMD-HDSDI can also be used as a standalone display with HD-SDI loop-through.
Features
■
1920 x 1200 Full Resolution 23” Panel
The V-R231-IMD-HDSDI features an all-digital TFT-MegaPixel active matrix LCD system with 1920x1200 native
resolution. The LCD panel features a brightness of 400 cd/m2 and a 700:1 contrast ratio making it ideal in a variety of
environments and lighting conditions.
■
In-Monitor Display
In-Monitor Display allows on-screen text and tally indication, controlled locally or remotely via a variety of industry
standard protocols.
■
OSD Features
Embedded time code and an embedded audio presence indicator can be displayed on the screen in a variety of
configurations.
■
Advanced Features
Aspect ratio settings, blue-only mode, and monochrome mode are a few of the advanced features allowing the VR231-IMD-HDSDI to be at home in any broadcast environment. Pixel-to-Pixel mode also allows native display of any
incoming image format.
■
Flexible Screen Markers
A variety of screen markers in both 4:3 and 16:9 modes allow accurate monitoring of the different aspect ratios used in
broadcast environments.
■
User-Definable Function Buttons
Two user-definable function buttons allow quick access to numerous settings and features including aspect ratio,
screen markers, monochrome mode, color temperature, and more.
4
Installation and Initial Setup
■
Unpacking
Carefully unpack the V-R231-IMD-HDSDI monitor and verify that the following items are included:
• V-R231-IMD-HDSDI Monitor
• V-PS24-7.5 Power Supply with 4-Pin XLR Connector
• Operating Instructions
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,
immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States,
call +1 (310) 333-0606.
■
Installation
The V-R231-IMD-HDSDI monitor provides VESA standard 75 mm and 100 mm hole patterns for attachment to VESA
mounts supporting at least 15 lbs. Adequate ventilation is required when installed to prevent possible damage to the
monitor’s internal components.
The V-R231-IMD-HDSDI can be configured as a desktop monitor with an optional stand (Marshall Part No.
V-ST23-32).
V-R231-IMD-HDSDI with optional desktop stand
(Marshall Part Number V-ST23-32)
■
Connections, Power-On and Initial Setup
Plug the V-PS24-7.5 power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the 4-pin XLR connector
to the back of the monitor.
V-R231-IMD-HDSDI for the active loop-though output to be activated.) The monitor defaults to ‘ON’ when power is
supplied. Video will automatically be detected and displayed on the screen.
For IMD setup details, see IMD Configuration Submenu on page 19.
Connect the required cables for video signal input and output. (Power must be applied to the
5
Top and Front Panel Features
Power Button
Turn the monitor off or on by pressing the power
button. In the ON state, the LED above the power
button will illuminate green.
Menu Navigation Buttons
Use the Menu, ↑, ↓, and Select buttons to display
and navigate the on-screen menu (See Main Menu
and Navigation – Page 9).
User-Definable Function Buttons
Two user-definable function buttons can be used for
direct access to various settings. Functions are
assigned using the on-screen menu (See User-
Definable Function Buttons – Page 15).
RotoMenu™ Knob
The RotoMenu™ knob is alternate means of
accessing and navigating the main menu, using only
a single control.
Image Adjustment Knobs
Use the image adjustment knobs to adjust color
saturation, brightness and contrast of the image.
The status of each image adjustment parameter is
shown on the bottom left of the screen, with values
ranging from 0 to 100. Pressing each knob resets
the corresponding adjustment to its default setting
(50).
LED Tally
Three LED tally lights (yellow, red, green) are
available above the screen. Each tally light can be
controlled from a variety of sources (See Tally Source – Page 21).
6
Rear Panel Features
HD-SDI Input and Output
The V-R231-IMD-HDSDI has one HD-SDI input and
one active loop-through output. Note: No more than 4 screens should be connected in one loop.
RS-422/485 Serial Interface
The RS-422/485 ports are used to remotely control
the IMD or all V-R231-IMD-HDSDI features, using a
variety of industry standard protocols. (Note:
Connector/pin-out may need to be adapted
depending on protocol and controlling device
used. See pin-out details on page 22.) Only one
connection to either port is needed to control the
monitor. The second port can be used to loop
multiple monitors in the same bus.
Desktop Mounting Slots
These slots are used when attaching the monitor to
the optional desktop stand.
See page 5 for details.
Tally Interface (HD-15)
Both LED tally and OSD tally can be activated via
the HD-15 connector by connecting the
corresponding pin to ground. A variety of external
devices can be used to perform the contact closure.
No additional power should be supplied to the HD15 port. See pin-out details on page 22.
Power Input
Connect the 12VDC input to the 2-Pin twist lock
power input connector. Power can be supplied from
the included power supply, or from a variety of DC
sources supplying at least 3.0 Amps at 12 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
VESA 75mm and 100mm Hole Patterns
VESA-standard 75 mm and 100 mm hole patterns
are provided to accommodate a variety of custom
mounting options.
7
Compatible Input Formats
The following SDI standards are supported by the V-R231-IMD-HDSDI:
Off, 95%, 93%, 90%, 88%, 80%, 1.85:1, 2.35:1, 4:3, 14:9, 13:9
Off, 95%, 93%, 90%, 88%, 80%
Off, 50% Gray, Black
Off, On
55K, 65K, 93K, Linear
Off, On
Off, On
Off, On
4:3, Scaled 4:3, 16:9, Full Screen
Blue, Red, Green, White, Black
RGB = 000 - 255 (8 unit steps)
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio
Monitor, Aspect Ratio, Pixel to Pixel, CTemp/Gamma, Blue Only, Monochrome
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio
Monitor, Aspect Ratio, Pixel to Pixel, CTemp/Gamma, Blue Only, Monochrome
Mfg, User 1, User 2, User 3, User 4, User 5, User 6
User 1, User 2, User 3, User 4, User 5, User 6
(Main board firmware version number displayed)
(Keypad firmware version number displayed)
(CPLD firmware version number displayed)
Off, On
Off, On
Off, RGY, RG, GR, IMD
Off, On
Off, LTC, VITC
Off, On
Marshall, Image Video, TSL v4.0, Marshall-IV
000-255
001-254
User Defined (16 chars max.)
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Center, Right, Left
Red, Green, Yellow
User Defined (16 chars max.)
Standard, Image Video HW, Image Video 422, Standard + IV422, TSL/Marshall 422
T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1-
Rx, Tx
P, F, O
Rec, Exe
CRC, Err
R, E
000:000 1010111
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.