Marshall electronic V-R201P-AFHD User Manual

Maintenance

Marshall Electronics

, Inc.

Specifications (continued)

Marshall Electronics

V-R201P-AFHD

SD/HD Widescreen LCD Monitor

■

Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro­fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the
screen to avoid damaging the LCD.

■

Faceplate Dusting

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

Warranty

Marshall Electronics warranties to the first consumer that this V-R201P-AFHD LCD monitor will, under normal use, be free
from defects in workmanship and materials, when received in its original container, for a period of one year from the
purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or
construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the
periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel
failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any
other person is authorized to make any warranties other than those described above, or to extend the duration of any
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve
products and product features, specifications may change without notice.

Operating Instructions

1910 East MapleAve.

El Segundo, CA 90245

Tel: [phone] • Fax: [phone]

www.LCDRacks.com • [e-mail]

16

Contents

Specifications

Product Overview.....................................................................................................................................................3

Features ....................................................................................................................................................................3

Installation and Initial Setup ...................................................................................................................................4

Unpacking..............................................................................................................................................................4

Installation..............................................................................................................................................................4

Connections and Power-On...................................................................................................................................4

Front Panel Features ...............................................................................................................................................5

Power Button ........................................................................................................................................................5

Input Select Buttons...............................................................................................................................................5

On-Screen Menu Navigation Buttons ....................................................................................................................5

User-Definable Function Buttons...........................................................................................................................5

Image Adjustment Knobs.......................................................................................................................................5

Tally Lights.............................................................................................................................................................5

Rear Panel Features.................................................................................................................................................6

Power Input............................................................................................................................................................6

Signal Input/Output................................................................................................................................................6

Tally Interface ........................................................................................................................................................6

Mounting Holes......................................................................................................................................................6

Compatible Input Formats.......................................................................................................................................7

On-Screen Menu.......................................................................................................................................................8

STRUCTURE OVERVIEW ....................................................................................................................................8

MAIN MENU AND NAVIGATION ..........................................................................................................................8

MARKER SETUP SUBMENU ...............................................................................................................................9

16:9 Markers......................................................................................................................................................9

4:3 Markers......................................................................................................................................................10

Marker Background.........................................................................................................................................10

Center Marker..................................................................................................................................................10

VIDEO CONFIGURATION SUBMENU ...............................................................................................................11

Color Temperature Presets .............................................................................................................................11

Adjusting Color Bias........................................................................................................................................11

Adjusting Color Gain........................................................................................................................................11

Monochrome Mode..........................................................................................................................................12

Blue Only Mode...............................................................................................................................................12

Pixel-to-Pixel Mode..........................................................................................................................................12

Aspect Ratio Setting........................................................................................................................................13

Scanning Modes..............................................................................................................................................13

Delay Modes....................................................................................................................................................13

SYSTEM CONFIGURATION SUBMENU............................................................................................................14

Internal SMPTE Color Bars.............................................................................................................................14

User-Definable Function Buttons ....................................................................................................................14

Status Display..................................................................................................................................................14

Saving and Loading User Configuration Presets ............................................................................................14

■

PANEL

Screen Size 20.04” Diagonal
Display Area (h x v) 443.609 x 249.408 mm
Aspect Ratio 16:9 Native (4:3/16:9 Modes)
Pixels 1366 x RGB x 768
Color Depth 24-bit (16,777,216 Colors)
Viewing Angle 178° x 178°
Brightness 430 cd/m
Contrast Ratio 600:1
Dot Pitch (h x v) 0.108 x 0.324 mm
Pixel Pitch (h x v) 0.324 x 0.324 mm

■

VIDEO INPUT/OUTPUT

Video Input / Output

Supports SMPTE 170M, NTSC/PAL
Color sub-carrier required

S-Video (Y/C) Input / Output

Supports SMPTE 170M, NTSC/PAL

YPBPRInput / Output

Supports SMPTE 260M, 274M, 296M

HD-SDI Input / Output

Supports ITU-R BT.656, SMPTE 259M, 292M

VGA Input

Supports RGBHV, RsGsBs, RGsB, RGB CS,

DVI Input

Supports Digital Signals Only (DVI-D)
HDCP Supported

■

CONNECTORS

Video Input

Video 1 x BNC Female (75 Ω)
S-Video (Y/C) 1 x 4-Pin Mini-DIN
YPBP

R

HD-SDI 1 x BNC Female (75 Ω)
VGA 1 x HD-15 Female
DVI 1 x DVI-I 29-Pin Female

Video Output (Active Loop-Through)

Video 1 x BNC Female (75 Ω)
S-Video (Y/C) 1 x 4-Pin Mini-DIN
YPBP

R

SDI 1 x BNC Female (75 Ω)

3 x BNC Female (75 Ω)

3 x BNC Female (75 Ω)

2

■

TALLY

3 LEDs (Green, Red, Yellow). Activation requires contact
closure of pin to ground on the HD-15 connector:

Pin No. Signal

1 Green
2 Red
3 Yellow
4 Ground
5 Ground
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 N/C
12 N/C
13 N/C
14 Ground
15 Ground

■

ELECTRICAL

Power Consumption 3A @ 24VDC (72 W)
Voltage Requirement 24 VDC

V-LCD23-P-01 Power Supply:

Input 100V-240V, 2.5A, 50/60Hz
Output 18-24VDC, 7.5A, 150W Max

■

MECHANICAL

Dimensions (w x h x d): 18.69” x 12.240” x 2.09”
Rack Height: 7 RU
Additional Mounting: VESA 75 mm

(Desktop Stand Available)
Weight (Monitor Only): 12.54 lbs
Operating Temperature 32°F to 120°F (0°C to 50°C)
Storage Temperature -4°F to120°F (-20°C to 50°C)

Compliance ₠, FCC-Class A, ANSI-63.4

(Certificates on file)

RoHs Do not dispose. Return to

Manufacturer or Authorized
Recycle Facility.

Specifications.........................................................................................................................................................15

Maintenance............................................................................................................................................................16

Warranty..................................................................................................................................................................16

Power Input

2-Pin Conxall Twist-Lock Female

Tally Interface

HD-15 Female

2

15

On-Screen Menu (continued)

SYSTEM CONFIGURATION SUBMENU

Video Configuration Submenu

■

Internal SMPTE Color Bars

Use to display internally generated SMPTE split-field color bars.

■

User-Definable Function Buttons

Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor.
The following options are available for each button:

Product Overview

The V-R201P-AFHD is a 20” widescreen high definition LCD monitor featuring our completely digital TFT-MegaPixel™
active matrix LCD platform. Available as a rack mount display or with a desktop stand, this monitor is an ideal lightweight
replacement for CRTs used in all broadcast and professional video applications. When rack mounted the V-R201P-AFHD
is ideal for video wall applications, occupying only 7 RU. Emulation of SMPTE-C/EBU color and adjustable color
temperature enable the most precise color representation possible. Our proprietary digital signal processing features 10­bit A/D conversion of all analog signals, with 4X over-sampling and 5-line super-adaptive 2D comb filtering of composite
signals. De-interlacing is performed using our HyperProcess™ algorithm with motion adaptive interpolation. Multi-format
compatibility accommodates virtually all video formats including NTSC/PAL, 480i/p, 720p, and 1080i/p standards. VGA
and DVI inputs accept VESA standards allowing the display to be used as a computer monitor. Advanced features include
aspect ratio settings, a variety of screen markers, underscan mode, blue-only mode, monochrome mode, H/V delay, and
Pixel-to-Pixel mode.

Features

■

High-Resolution 20” Panel

The V-R201P-AFHD features an all-digital TFT-MegaPixel™ active matrix LCD system with 3.15 million pixels. The
LCD panel features a brightness of 430 cd/m2, 600:1 contrast ratio, and a 178° all-around viewing angle making the
display ideal in a variety of environments and lighting conditions.

• DELAY Enable and rotate amongst delay modes.

• RATIO Toggle between 4:3 and 16:9 aspect ratios.

• BACK Rotate amongst marker backgrounds.

• CENTER Enable/disable center marker.

• MARKER Enable and rotate amongst marker settings (choices depend on aspect ratio setting).

• MONO Enable/disable monochrome mode.

• CTEMP Rotate amongst color temperature settings.

• PTP Enable/disable Pixel-to-Pixel mode.

FUNCTION 1 is set to RATIO by default.
FUNCTION 2 is set to PTP by default.

■

Status Display

Use to enable on-screen display of input/format status in the upper-left corner of the screen.

■

Saving and Loading User Configuration Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All
monitor settings on the monitor are saved, including the image adjustment knob settings.

• Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded
by selecting MFG. (Factory defaults cannot be overwritten.)

• Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

■

Multi-Format Compatibility

With a variety of analog and digital inputs, the V-R201P-AFHD accommodates virtually all video formats. Input types
include Composite Video, S-Video, YPbPr, SDI, VGA, and DVI with HDCP. Accepted formats include NTSC/PAL,
480i/p, 576i/p, 720p, 1035i, and 1080i/p standards, as well as VESA PC formats through SXGA (1280 x 1024).

■

End-to-End Digital Signal Processing

Analog signals are digitized using an advanced 10-bit process with 4x over-sampling, 5-line super-adaptive 2D comb
filtering, and exacting color space conversion. Video is scaled to fit on the screen in the highest possible resolution
using a state-of-the-art LSI that incorporates precision gamma correction and our HyperProcess™ motion adaptive
interpolation for interlaced images.

■

ColorMatch™ Conversion with Color Temperature Adjustment

Emulation of SMPTE-C/EBU color space allows the V-R201P-AFHD to replace any broadcast CRT monitor. Settings
include D55, D65 and D95. Bias and Gain adjustment for each color enables precise color matching and white
balance.

■

Advanced Features

Aspect ratio settings, underscan mode, blue-only mode, monochrome mode, and H/V delay are a few of the advanced
features making the V-R201P-AFHD at home in any broadcast environment. Pixel-to-Pixel mode also allows native
display of any incoming image format.

■

Flexible Screen Markers

A variety of screen markers in both 4:3 and 16:9 modes allow accurate monitoring of the different aspect ratios used in
broadcast environments.

■

User-Assigned Function Buttons

Two user-assignable function buttons on the front-panel allow quick access to numerous settings and features
including aspect ratio, screen markers, monochrome mode, color temperature, delay mode, and more.

14

3