Page 1
V-R1041DP-TE / V-R1042DP-TE
User’s
Guide
10
Switch Settings, Adjustments and Indicators
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
www.LCDRacks.com
Email: sales@lcdracks.com
Tally Lights
Power
RATIO: Each push of the button switches
between 4:3 and 16:9 modes
MARK (16:9 mode only):
Each push of the button switches
between 16:9 standard, 4:3 marker
(shaded), and 4:3 marker (cropped)
11
Warranty
Marshall Electronics warranties to the first consumer, that this V-R1041DP-TE / V-R1042DP-TE portable monitor will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and
parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications
in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties
other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period
described above.
Due to constant effort to improve products and product features, specifications may change without notice.
Brightness, Color,
and Contrast controls
Standard 4:3 Marker (Shaded) 4:3 Marker (Cropped)
RATIO Settings
4:3 Mode 16:9 Mode
MARK Settings (16:9 Mode Only)
12/14/2006
V-R1041DP-TE / V-R1042DP-TE
User’s
Guide
Product Overview
Standard Accessories
Optional Accessories
Electrical Specifications
Mechanical Specifications
Faceplate Cleaning
Operational Setup
Input Connectors
Switch Settings, Adjustments and Indicators
Features
Warranty
1
2
3
4
5
6
7
8
9
10
11
Page 2
1
V-R1041DP-TE / V-R1042DP-TE
User’s Guide
Product Overview
The V-R1041DP-TE / V-R1042DP-TE is a direct replacement for 8 and 9-inch CRTs used in broadcast and professional video applica-
tions. This cost-effective model features our award-winning all-digital TFT-Megapixel™ LCD panel with 2.4 million pixels, along with
our HyperProcess™ de-interlacing algorithm producing the smoothest motion available on a TFT LCD. Video is scaled to fi t on the
screen in the highest possible resolution utilizing a state-of-the-art LSI with 6x6 pixel interpolation, precision gamma correction, and
Match Color Conversion™ to produce the highest quality images available.
2
Features
TFT-MegaPixel™ Display
1024x768 Dots (2.4 Million Pixels)
SD/HD SDI Input SMPTE 259M-C, 292M / ITU-R BT.601; 1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60, 59.94;
Durable metal enclosure Protection for all connections and controls with strategically placed ventilation for use in harsh envi-
Protective Screen Cover Optical grade polycarbonate screen cover with Antirefl ective/Antiglare coating
HyperProcess™ Display interlaced images without smearing or sacrifi cing of temporal resolution with our proprietary
MatchColor Conversion™ Factory programmed to closely match typical SMPTE/CIE color metric and color temperature specifi -
OSD On screen display of Format and Ratio
50,000 hour backlight life Backlights are the most common failure on a TFT/LCD monitor. This backlight system has an MTBF
Tally 2 LEDs (Green, Red) per monitor
3
Standard Accessories
All signals remain completely digital to provide the most exact images available.
720p/60,59.94,50,30,29.97,25
ronments
interpolation algorithms. Images are then displayed at a sample rate equal to the frame rate.
cations. This model is adjusted for D-65 color temperature and 72% SMPTE color gamut
of 5 years and uses specially designed lamps to provide brighter images.
Accessories Supplied with the V-R1041DP-TE / V-R1042DP-TE
• User’s manual
• “Brick” type 12VDC power supply with 2-pin twist-lock connector
4
Optional Accessories
Articulating Arm V-MG11043 Attach monitor to 1/3” mounting hole
Recommended Anti-Static Cleaners and Polishes
210 Plastic Cleaner & Polish and 210 Plus Cleaner
Sumner Laboratories
186 Lincoln Street
Boston, MA 02111
617-542-8656 / Fax: 617-482-9001
Crystalclean
Discovery Plastics
3700 Western Way, NE
Millersburg, OR 97231
541-926-2900 / Fax: 541-967-8441
www.discoveryplastics.com
Scotch-Brite High Performance Cloth
3M Stationery & Offi ce Supplies Div.
3M Center
St. Paul, MN 55144-1000
877-362-5684
Fax: 651-733-0382
www.mmm.com
The Simco Industrial Static Control
An Illinois Tool Works Co.
2257 North Penn Road
Hatfi eld, PA 19440-1998
800-203-3419
215-822-2171
Fax: 215-822-3795
www.simco.biz
8
Operational Setup
20/20 Plastic-Cleaner
Craftics, Inc.
PO Box 91930
Albuquerque, NM 87199
(505) 338-0005
Plexus Plastic Cleaner
Plexus
638 Lindero Canyon Rd. #371
Agoura, CA 91301
800-405-6495
Fax: 818-879-0697
NOVUS #1 Plastic Clean and Shine
NOVUS, Inc.
12800 Highway 13 South, Suite 500
Savage, MN 55378
800-548-6872 ext.451
Fax: 952-946-0435
Exair Corporation
1250 Century Circle North
Cincinnati, OH 45246-3309
513-671-3322
Fax : 513-671-3363
www.exair.com
1. Unpack the V-R1041DP-TE / V-R1042DP-TE and accompanying power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are
not located within the continental united states call +1 310-333-0606.
2. The V-R1042DP-TE can be mounted in an standard EIA 19-inch rack. The rack ears on both the V-R1041DP-TE and VR1042DP-TE can alternately be used as a table-top stand.
3. Connect required cables for signal input and output. Please note that power must be applied to the V-R1041DP-TE /
V-R1042DP-TE for the video output to be activated. All BNC connectors should be rated for 75Ω.
4. Plug the V-PS12-5V-1 power supply into an A.C. source. Attach the 2-pin twist-lock power connector to the back of the monitor.
Please note that DC power can be supplied directly to the monitor from a variety of sources, such as a battery adapter or vehicle
power. In operation, the V-R1041DP-TE / V-R1042DP-TE will draw approx. 1. amp.
Attach 2-pin twist-lock power connector from VPS12-5V-1 power supply to the back of the unit.
5. Turn on the V-R1041DP-TE / V-R1042DP-TE by pressing the power switch located on the front of the unit.
Mount for IDX Batteries V-R65-BA
Sun Hood V-H10M
Power Adapter Cable V-PAC-D Use with Anton Bauer D-type connection
Power Adapter Cable V-PAC-XLR Use with 4 Pin XLR connections
Use with V-Mount batteries
Use for outdoor viewing or
in brightly-lit areas
V-R1041DP-TE / V-R1042DP-TE
2
User’s Guide
9
Input Connectors
Tally Pinout (HD-15)
Pin No. Signal
1 Green (Monitor 1)
2 Red (Monitor 1)
3 N/C
4 Ground
5 Ground
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 Green (Monitor 2)
12 Red (Monitor (2)
13 N/C
14 Ground
15 Ground
* Tally lamps active when connected to ground
12VDC Power Input
Marshall Electronics
HDSDI Input/Output
(Active output requires monitor
to be powered)
5
Page 3
Optional Accessories (continued)
Battery Adapter
Sequential 2 channel charger
Sequential 4 channel charger
Simultaneous 4 channel charger
55 W Lithium Battery IDX-E7S V-Mount battery pack with 3 LED power Indicator
V-DV-PWR1
IDX-VL-2Plus
IDX-VL-4
IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less
Uses 2 Sony DVCam/HDV FP-Type batteries.
When used with monitor power supply, can charge batteries
plus operate monitor
2-channel sequential charger with a built-in 60W power supply. Charges 2 ENDURA E series batteries in fewer than 5
hours. One 10’ XLR cable included. Weighs only 2 lbs
Economically charges 4 ENDURA E series batteries in
under 6 hours using Full Power Charge (FPC) method
55 W Lithium Battery
with Power Link
82 W Lithium Battery IDX-E10S V-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
with Power Link
Analog to Digital Converter BC-0909-AD Converts composite, Y/C, or YPbPr signals to HDSDI
Set of 3 Tripod Mount Brackets
with screws
IDX-E7
IDX-E10
V-LCD70TMB-02
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
Fits all single screen 7.0", 8.4", 10.4" and V-R65P-HD
monitors. Mounting plate can be installed to any side of
monitor enclosure. Compatible with most 1/4-20 threaded
mounting devices.
Cleaning Wipes V-HWP-K
Package of 10 non-toxic, antistatic, alcohol and ammonia
free cleaning wipes.
Marshall Electronics
3
Page 4
Electrical Specifi cations
V-R1041DP-TE / V-R1042DP-TE
User’s Guide
5
Display (Viewing Area) 10.4 Inch diagonal (211.2mm W x 158.4mm H)
Screen Aspect Native 4:3, Switchable to 16:9
Resolution (RGB Dots) 1024HxRGx768V (2.4 Million Pixels)
Viewing Angles 170°H x 170°V
Contrast Ratio 400:1
Dot Pitch 0.206mm square pixel
Pixel Response 13ms rise /12ms fall
Brightness 400 cd/m²
Backlight Field Replaceable CCFL (50,000 hour half life)
Screen Treatments Anti Reflection, Anti Glare, Hard Coat
Protective Screen 0.118” (3mm) thick Optical Grade Polycarbonate with Anti-Glare and Anti-Abrasion
coatings. (600 Cheesecloth mil-M-13508C)
Estimated MTBF 5 years of 24/7 operation
Inputs 1 SDI/HDSDI input per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC;
1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60,59.94; 720p/60,59.94,50,30,29.97,25
Active Outputs 1 SDI/HDSDI output per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC
Tally 2 LEDs (Green, Red) per monitor; female HD-15 connector
Color temperature D65 (6500° Kelvin)
Color Gamut SMPTE-C/EBU
Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required 10.4 to 16.8 VDC
Power Consumption 18 watt nominal for V-R1041DP-TE, 36 watt nominal for V-R1042DP-TE
Operating Temperature 32°F to 120°F (0°C to 50°C)
Storage Temperature -4°F to 120°F (-20°C to 50°C)
Compliance
RoHS WEEE/Environmental Do not dispose. Return to Manufacturer or Authorized Recycle Facility
V-PS12-5V-1 Power Supply 14-10 VDC (Universal Voltage 5.0Amps max - UL Class 2 supply included)
₠, FCC-Class A, ANSI-63.4 (Certificates on file)
Mechanical Specifi cation
6
V-R1041DP-TE V-R1042DP-TE V-PS12-5V-1 Power Supply
Dimensions (W x H x D)
(Main body only)
Approx. Weight 3.95 lbs 6.95 lbs 0.65 lbs
Faceplate Cleaning
7
Faceplate Cleaning
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fi ber
cloth. Do not use paper towels. Paper towel fi bers are coarse and may scratch the surface of the Polycarbonate faceplate.
Paper towels may also leave streaks on the surface. Antistatic and fi ngerprint resistant cleaning agents are recommended.
Wash protective cover with a solution of mild soap or detergent and lukewarm water. Use a clean soft cloth, applying only light pressure. Rinse with clean water and dry by blotting with a damp cloth or chamois. Grease, oil or tar may be removed with a good grade
of hexane, aliphatic naphtha, or kerosene. These solvents may be obtained at a paint or hardware store and should be used in accordance with manufacturer’s recommendations.
DO NOT USE: window cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, benzene,
alcohol, carbon tetrachloride, or lacquer thinner. These can scratch the sheet’s surface and/or weaken the sheet causing
small surface cracks called “crazing.”
Faceplate Dusting
Dust with a soft, damp cloth or chamois. Dry or gritty cloths may cause surface scratches and create a static electric charge on the
surface. Neutralizing static electricity effects by using recommended cleaning and polishing practice.
Faceplate Polishing
Protect and maintain surface gloss by occasional polishing with a good plastic cleaner and polish. Apply a thin, even coat with a soft
clean cloth and polish lightly with cotton fl annel. Then wipe with a damp cloth to help eliminate electrostatic charges that can attract
dust particles.
Marking on the Faceplate
Use SHARPEE or equivalent marker. Clean as per instructions with an ammonia free cleaning agent.
10.25” x 8.56” x 1.60” 18.69” x 8.56” x 1.60” 4.13” x 2.50” x 1.25”
V-R1041DP-TE / V-R1042DP-TE
4
User’s Guide
Loading...