OPERATION GUIDE
Models:
CV340 Series
CV500 Series
Please read this guide carefully before installaing and using the camera.
Please read this guide carefully before installaing and using the camera.
Please retain this guide for reference.
Please retain this guide for reference.
INFORMATION FOR USERMENU STRUCTURE MENU STRUCTURE
DC OUTDOOR, INDOOR
SMART IR ON, OFF
AUTO
B/W
3DNR
LENS
WHITE
DAY
NR
CAM TITLE
EXIT
PRIVACY
DEFECT
SHARPNESS
ADJUST
OSD
D-EFFECT
MOTION
SPECIAL
VIDEO
MANUAL
EXPOSURE
SHUTTER
AUTO
1/30sec ~ 1/50,000sec, x2~x30
AGC LOW, MIDDLE, HIGH
SENSE-UP
AUTO (x20 ~ X30)
OFF
BRIGHTNESS 1 ~ 100
D-WDR (ACCE) OFF, LOW, MIDDLE, HIGH
DEFOG OFF, LOW, MIDDLE, HIGH
BACKLIGHT
BLC
HSBLC
BALANCE
ATW
AWC-SET
OFF
LANGUAGE
INDOOR
OUTDOOR
MANUAL 1 ~ 100
DELAY
&
NIGHT
COLOR
D-->N (AGC)
N-->D (AGC)
RS485
VERSION
BURST
IR SMART
IR LED
IR PWM
EXT
MONITOR
2DNR
1080 HD-SDI Camera 2 1080 HD-SDI Camera3
LEVEL 0 ~ 100
S-LEVEL: 0 ~ 100
E-LEVEL: 0 ~ 100
RESET
LSC
NTSC/PAL
FREEZE
MIRROR
D-ZOOM
NEG.IMAGE
SELECT
DISPLAY
SENSIVITY
MOTION VIEW
DEFAULT
SELECT
DISPLAY
COLOR
DEFAULT
LIVE DPC
LEVEL
STATIC DPC
START
LEVEL
SENS-UP
SHARPNESS
LEVEL
RESOLUTION
LCD
CRT
TEXT COLOR
OUTLINE
OSD Joystick and Button
LENS
MANUAL, VIDEO, DC
Select LENS using the UP or DOWN button.
You can change between MANUAL, VIDEO and DC using the LEFT or RIGHT button.
MANUAL: Manual Lens (Fixed focal or fixed IRIS lens)
VIDEO: Auto Iris Varifocal Lens.
DC: DC Auto Iris Varifocal Lens.
You can change the DC mode between INDOOR mode and OUTDOOR mode using the LEFT
or RIGHT button.
INDOOR: Select for indoor installation.
OURDOOR: Select for outdoor installation.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
Press SET button to access the SETUP menu.
Select each sub-menu by using the UP, DOWN, LEFT, and RIGHT buttons.
Use the UP & DOWN buttons
to select the desired item.
1080 HD-SDI Camera 4 HD-SDI 1080p Camera5
Press the SET button to select.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
Icon indicates “Press OSD Button” or “Enter Sub Menu”.
Icon indicates “Not Available”.
Use the LEFT & RIGHT buttons
to change the sub-item.
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
DC LENS MODE
DC INDOOR
RETURN RET
EXPOSUREEXPOSURE SHUTTER AGC
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
SHUTTER: You can adjust the shutter speed of the lens.
You can adjust the shutter speed manually or select shutter speed mode from FLK or AUTO
mode using the LEFT or RIGHT button.
FLK: Select this when you experience picture flicker, this happen when
there is a clash with the installed lighting frequency.
AUTO: Enable AUTO to control the shutter speed automatically. If AUTO
is selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
1/30sec ~ 1/50,000sec, x2~x30: You can control shutter speed manually
using the LEFT or RIGHT button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
AGC(AUTO GAIN CONTROL): A function which controls the amplification/
gain process automatically if the illumination falls under the usable level.
You can adjust the AC level from LOW, MIDDLE, or HIGH using the LEFT and RIGHT button.
LOW: Allows automatic gain control from 5.3dB to 20dB.
MIDDLE: Allows automatic gain control from 5.3dB to 26dB.
HIGH: Allows automatic gain control from 5.3dB to 32dB.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
■ If the shutter mode is set to AUTO, carefully position the camera during installation since
the produced image might be poorly framed due to a bright light source.
■ If the gain control (AGC) of EXPOSURE mode is set to OFF, SENS-UP mode is accordingly
set to ‘- - -‘.
■ When the SHUTTER is set to MANUAL or FLK mode, SENS-UP will be disabled.
1080 HD-SDI Camera 6 1080 HD-SDI Camera7
EXPOSUREEXPOSURE SENS-UP BRIGHTNESS
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
SENS-UP: When it is in low luminance condition, the camera automatically
detects the light level and maintains a clear picture quality if this mode is activated.
You can select the sense-up mode from OFF or AUTO mode using the LEFT or RIGHT button.
OFF: Deactivates the SENS-UP function.
AUTO: Activates the SENS-UP function.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
SENS-UP
SENS-UP x8
RETURN RET
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
BRIGHTNESS: Adjust the screen brightness.
You can adjust the brightness level from 1 ~ 100 using the LEFT or RIGHT button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
■ Ghosting in object movements may occur if the sens-up is set to higher level.
1080 HD-SDI Camera 8 1080 HD-SDI Camera9
■ Higher BRIGHTNESS setting may cause noise, spots, or white image.
EXPOSURE DWDR(ACCE), DEFOG
BACKLIGHT
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
DWDR(ACCE) : DWDR(ACCE) illuminates darker areas of an image while
retaining the same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark areas.
You can select the DWDR level from OFF, LOW ,MIDDDLE, or HIGH using the LEFT or
RIGHT button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
DEFOG: DEFOG feature will help increase visibility in extreme weather conditions,
such as fog, rain or in a very strong luminous intensity.
You can select the DEFOG level from OFF, LOW MIDDLE, or HIGH using the LEFT or
RIGHT button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
BACKLIGHT: BACKLIGHT will help distinguish an object in front of the strong
background lighting.
You can select the BACKLIGHT mode from OFF, BLC, or HSBLC using the LEFT or RIGHT button.
OFF: Disable BACKLIGHT mode.
BLC: Enables a user to select a desired area on a picture and view that
area more clearly.
GAIN: Adjust level of the BLC function.
You can select the GAIN level from LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
AREA: Select the area to be enhanced.
You can select the BLC area using the UP, DOWM, LEFT or RIGHT button.
DEFAULT: Set the BLC setting value as default.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
BLC
GAIN MIDDLE
AREA
DEFAULT
RETURN RET
BACKLIGHT
SHUTTER AUTO
AGC HIGH
SENS-UP AUTO
BRIGHTNESS ------45
DWDR(ACCE) OFF
DEFOG OFF
BACKLIGHT BLC
RETURN RET
POSITION
1080 HD-SDI Camera 10 1080 HD-SDI Camera11
EXPOSURE BACKLIGHT
WHITE BALANCE
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
HSBLC: If the scene contains extremely bright light areas such as; from
car headlight, the light can mask out much of the on-screen detail.
SELECT: Select the area to be enhanced (AREA1, AREA2, AREA3, AREA4)
You can select the BLC area using UP, DOWM, LEFT or RIGHT button.
DISPLAY: Display the zone or not and adjust the size and position.
Select ON using LEFT and RIGHT button and press SET button to display
the HSBLC area zone.
POSITOIN: Adjust the position.
You can adjust HSBLC area position UP, DOWN, LEFT or RIGHT button.
SIZE : Adjust the size.
You can adjust HSBLC area size sing UP, DOWN, LEFT or RIGHT button.
LEVEL: Adjust level of the HLC function.
MODE: Select the HSBLC mode from NIGHT and ALL DAY.
BLACK MASK: Enable/Disable BLACK MASK function.
DEFAULT: Set the HSBLC setting value as default.
HSBLC
SELECT AREA1
DISPLAY ON
LEVEL ------45
MODE ALL DAY
BLACK MASK ON
DEFAULT
RETURN RET
■ Because there can be a difference in the effectiveness of HSBLC according to the amount of light area
in the screen, optimize the installation angle for the best HSBLC performance.
■ HSBLC is only activated in low luminance condition if a bright area exceeds a designated size.
■ HSBLC is not activated in day light or when bright light is not present at night.
POSITION
Select WHITE BALANCE using the UP or DOWN button.
You can change the white balance mode between ATW, AWC-SET, INDOOR, or OUTDOOR
using the LEFT or RIGHT button.
ATW: Select this when the color temperature is between 2,400˚K and 11,000˚K.
(Ex. A fluorescent lamp)
AWC SET: The white balance is automatically adjusted in a specific luminance
environment. To find the optimal luminance level for the current environment, point
the camera towards a shoot of white paper and press the SET button.
INDOOR: Select this when the color temperature is between 4,500˚K and 8,500˚K.
OUTDOOR: Select this when the color temperature is between 1,700˚K and 11,000˚K.
(Ex. sodium light inclusion)
MANUAL: Select this to fine-tune White Balance manually.
You can adjust the blue and red tone level manually.
BLUE: Adjust the blue tone of the image. (0~100)
RED: Adjust the red tone of the image. (0~100)
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
■ Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode,
■ White Balance may not work properly under the following conditions. In this case select the AWC mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes
dramatically, the White Balance operation may become unstable.
1080 HD-SDI Camera 12 1080 HD-SDI Camera13
DAY & NIGHT COLOR, B/W
DAY & NIGHT AUTO, EXT
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.
BURST: Determines whether to transmit the burst signal or not .
IR SMART: Decrease screen saturation of objects within a short range.
LEVEL: Adjust level of the IR SMART function.
AREA: Select the area to activate the IR SMART.
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.
IR LED: Enable/Disable IR LEDs.
IR PWM: Adjust the IR LEDs output level.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
DAY & NIGHTIGHT
BURST ON
IR SMART ON
IR LED ON
IR PWM ------40
RETURN RET
IR SMART
LEVEL --------40
AREA
ETURN RET
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
AUTO: The mode is switched to COLOR in a normal environment, but switched
to B/W mode when ambient illumination is low.
You can select and adjust DELAY, D N, and N D using the LEFT or RIGHT button.
DELAY: You can select day/night switching delay time from. (0s ~ 60s)
D N (AGC): Adjust the brightness of the lighting where the mode switch
occurs from day to night.
N D (AGC): Adjust the brightness of the lighting where the mode switch
occurs from night to day.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
■ EXT function is disabled.
DAY & NIGHT AUTO
DELAY ---------5
D N (AGC) --------75
N D (AGC) --------35
RETURN RET
1080 HD-SDI Camera 14 1080 HD-SDI Camera15
NR (Noise Reduction) 2DNR, 3DNR
SPECIAL CAM TITLE
Select NR (NOISE REDUCTION) using the UP or DOWN button
You can move the menu from 2DNR, 3DNR, LEVEL, and SMART IR and set each menu using
the LEFT or RIGHT button.
2DNR: Reducing noise in the brightness of the image.
3DNR: Reducing noise causing by movement.
- S-LEVEL: Set the start level of 3DNR function.
- E -LEVEL: Set the end level of 3DNR function.
LEVEL: Adjust noise reduction level.
SMART NR: Activates & Deactivates 2DNR & 3DNR Automatically depends with
environment.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
■ When adjusting the noise reduction level in the NR mode, remember that the higher the level set,
the more the noise level will be reduced, as will the brightness of the image.
2D & 3D NR
2DNR ON
3DNR ON
LEVEL --------70
SMART NR ON
RETURN RET
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
CAM TITLE: If you enter a title, the title will appear on the monitor.
You can input the camera title from the virtual keyboard using the LEFT, RIGHT, UP, DOWN, and
SET button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ▶ → ← ↑ ↓ ( )
¯ - _ ■ / = & : ~ , .
→ ← CLR P OS END
- - - - - - - - - - - - - - -
1080 HD-SDI Camera 16 1080 HD-SDI Camera17
SPECIAL D-EFFECT
SPECIAL MOTION
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
D-EFFECT
You can select the digital effect mode from FREEZE, MIRROR, D-ZOOM, and NEG.IMAGE
AUTO
10
using the UP or DOWN button.
FREEZE: You can stop the image or reactivate it.
Select ON to freeze the image using the LEFT or RIGHT button.
MIRROR: You can adjust or rotate the picture vertically and or horizontally.
You can select the mirroring effect mode from MIRROR, V-FLIP, and ROTATE using the
LEFT or RIGHT button.
D-ZOOM: You can use a digital zoom of x1 ~ x64.
Select ON using LEFT and RIGHT button and press SET button to display the DIGITAL
ZOOM menu .
NEG. IMAGE: You can flip the color on screen.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
D-EFFECT
FREEZE OFF
MIRROR OFF
D-ZOOM OFF
NEG. IMAGE OFF
RETURN RET
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
MOTION: This product has a feature that allows you to observe the object movement,
and display <MOTION> indicator on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, SENSIVITY, MOTION VIEW, \
and DEFAULT using the UP or DOWN button.
SELECT AREA: You can select up to 3 motion detection areas.
You can select the motion detection area using the LEFT or RIGHT button.
DISPLAY: Adjust the size and position of the selected area.
Select ON using LEFT and RIGHT button and press SET button to display the motion zone.
- POSITOIN: Adjust the position.
You can adjust the motion detection zone using the UP, DOWN, LEFT or RIGHT button.
- SIZE: Adjust the size.
You can adjust the motion detection size using the UP, DOWN, LEFT or RIGHT button.
SENSITIVITY: Adjust the sensitivity of the motion detection.
You can select the motion detection zone color using the LEFT or RIGHT button.
MOTION VIEW
You can select ON to display the motion detection.
DEFAULT: Set the etting value as default.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
MOTION
SELECT AREA1
DISPLAY ON
SENSIVITY ------48
MOTION VIEW ON
RETURN RET
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
POSITION
1080 HD-SDI Camera 18 1080 HD-SDI Camera19
SPECIAL LANGUAGESPECIAL PRIVACY
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
PRIVACY: Task an area you want to hide on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, COLOR, and DEFAULT using the
UP or DOWN button.
SELECT AREA: You can select up to 8 PRIVACY areas.
You can select the privacy area using the LEFT or RIGHT button.
DISPLAY: Adjust the size and position of the selected area.
Select ON using LEFT and RIGHT button and press SET button to display the privacy zone.
- POSITOIN: Adjust the position.
You can adjust the privacy zone using the UP, DOWN, LEFT or RIGHT button.
- SIZE: Adjust the size.
You can adjust the privacy size using the UP, DOWN, LEFT or RIGHT button.
COLOR: Determine area color. You can select 16 different colors.
You can select privacy area color using the LEFT or RIGHT button.
DEFAULT: Set the PRIVACY setting value as default.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
MOTION
SELECT AREA1
DISPLAY ON
COLOR 1
DEFAULT
RETURN RET
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
OFF
OFF
POSITION
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button
LANGUAGE: You can select the menu language according to your requirements.
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the
LEFT or RIGHT button.
RS-485: Using RS-485 communication, the camera menu can be accessed using
System Controller or the DVR (Other Equipment).
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the LEFT
or RIGHT button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
■ RS-485 function is disabled.
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
1080 HD-SDI Camera 20 1080 HD-SDI Camera21
SPECIAL DEFECT
ADJUST SHARPNESS
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
DEFECT: Sensors could have defects for something wrong in the process of their
storage or manufacturing process. Such defects are called dead pixels, which
consist of two types: static dead pixel and dynamic dead pixel. The first can be
found from the beginning while the second is found over time after using sensors
for a certain period of time. Dynamic dead pixels may not be visible on the screen
of ordinary illumination. However, they can be made visible by amplifying the
analog/digital gain. Dead pixel correction (DPC) corrects such defects.
You can select the defect correction mode from LIVE DPC and STATIC DPC using the UP or
DOWN button.
LIVE DPC: Auto Dead pixel correction
LEVEL: Level of Auto Dead pixel correction
STATIC DPC: Manual Dead pixel correction
START: Start Dead pixel correction
LEVEL: Level of Manual Dead pixel correction
SENS-UP: Display Sens-Up Value
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SPECIAL
CAM TITLE OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 0C0C00
RETURN RET
DEFECT
LIVE DPC ON
LEVEL --------30
STATIC DPC ON
START
LEVEL --------40
SENS-UP
RETURN RET
OFF
OFF
NTSC
1080P
ON
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
SHARPNESS: As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
You can select the sharpness mode from SHARPNESS, LEVEL, and resolution using the UP or
DOWN button.
SHARPNESS: Select ON to activate the SHARPNESS function.
LEVEL: Adjust the level of the sharpness.
RESOLUTION: Select ON to increase the image quality.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
ADJUST
SHARPNESS
MONITOR LCD
OSD
LSC OFF
NTSC/PAL NTSC
RETURN RET
SHARPNESS
SHARPNESS ON
LEVEL ----50
RESOLUTION ON
1080 HD-SDI Camera 22 1080 HD-SDI Camera23
SPECIAL CAM TITLEADJUST MONITOR
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
MONITOR: Choose the appropriate setting for your monitor.
You can select the monitor mode from LCD or CRT using the LEFT or RIGHT button.
LCD: Select this menu item when using an LCD monitor.
You can select the sub-menu using the UP or DOWM button.
- GAMMA: Select and adjust the gamma level.
- BLUE: Adjust blue the gain level.
- RED: Adjust red the gain level.
CRT: Select this menu item when using an CRT monitor.
You can select the sub-menu using the UP or DOWM button.
- BLACK: Adjust the contrast level.
- BLUE: Adjust blue the gain level.
- RED: Adjust red the gain level.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
LCD
GAMMA AUTO
BLUE GAIN IIIIIIIII 50
RED GAIN IIIIIIIII 50
RETURN RET
ADJUST
SHARPNESS
MONITOR LCD
OSD
LSC OFF
NTSC/PAL NTSC
RETURN RET
CRT
BLACK LEVEL IIIIIIIII +0
BLUE GAIN IIIIIIIII 50
RED GAIN IIIIIIIII 50
RETURN RET
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
OSD: You can adjust style of font.
LSC: Lens shading compensation. Select ON to activate the brightness
compensation on the corner of lens.
NTSC/PAL: Select video type from NTSC or PAL.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
ADJUST
SHARPNESS
MONITOR LCD
OSD
LSC OFF
NTSC/PAL NTSC
RETURN RET
ADJUST
SHARPNESS
MONITOR LCD
OSD
LSC OFF
NTSC/PAL NTSC
RETURN RET
ADJUST
SHARPNESS
MONITOR LCD
OSD
LSC OFF
NTSC/PAL NTSC
RETURN RET
1080 HD-SDI Camera 24 1080 HD-SDI Camera25
N
●
●
●
●
●
T
●
●
●
●
T
t
●
T
d
●
e
T
●
●
T
p
c
●
T
w
●
T
d
●
C
●
T
●
●
●
●
●
RESET
TROUBLE SHOOTING
Select RESET using the UP or DOWN button.
RESET: Reset the camera settings to the factory defaults.
You can reset the camera setting using the SET button.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
PROBLEM SOUTION
Check that the power cord and line connection between the camera and
monitor are properly connected.
Check that video cable is connected with the Analog BNC (Yello w).
When the camera’ s HD-SDI BNC output is directly connected to the
othing appears on the screen.
he image on the screen is dim.
he image on the screen is dim, when
he LED is on.
he LEDs are reflect ed over the
ome or cover.
he image on the screen is dark.
he camera is not working
roperly, and the surface of the
amera is hot.
he SENS-UP function does not
ork.
he Motion Detection function
oes not work.
olor is not correct.
he screen flickers continually.
monitor’s BNC terminal : Make sure the monitor supports HD-SDI signal input.
When the camera’ s HD-SDI BNC output is connected to the DVR: Make
sure the DVR supports HD-SDI sig nal input.
HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Make sure the converter’s HD-SDI input format
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor to the pro per condition.
If the camera is exposed to very strong light, change the camera position.
Re-ad just the back-
Check if the LEDs are shaded and reflected by the camera ring, camera base, or other
objects near the camera.
Check if the LEDs are shaded and reflected by the camera ring, camera base, or other obj
cts near the camera.
Adjust the contras t feature of the monitor.
If there is an intermedia te device, set 75Ω properly; Check the termination.
Check that you have pro perly connected the camera to an appropriate
power source.
Check that AGC of EXPOSU RE SETUP menu is ‘OFF’.
Check that MOTIO N DET of SPECIAL SETUP menu is ‘OFF’.
Check the setti ng of WHITE BAL SETUP menu .
Ensure the camera is not pointing towards the sun.
Is the camera framing the sun or other bright light source?
If there is an intermedia te device, set 75OΩ properly; Check the termination.
HD-SDI video may not appear to be normal if distance exceeds the
maximum transfer rable distance.
When a BNC cable adapt or is used to combine two or more BNC cables
for distributed HD-SDI video transfer, make sure the impedance of the
adapt or is 75Ω. Otherwise, it may cause shorter transfer distance or
broken video transfer.
1080 HD-SDI Camera 26 1080 HD-SDI Camera27
Loading...