Marshall Amplification V-R171P-HDA User Manual

Marshall Electronics

1910 East Maple Ave.

El Segundo, CA 90245

Tel.: [phone] • 310-333-0606

Fax: [phone]

www.LCDRacks.com

Email: [e-mail]

Marshall Electronics warranties to the first consumer, that this V-R171P-HDA 17 inch LCD rack mounted monitor will, under normal use, be free from defects in work­manship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a
warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construc­tion, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend
the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing
area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.

Product Overview

Features

Specifications

Operational Setup

Connectors

Front Panel Indicators and Controls

Menu Functions

Standard Accessories

Optional Accessories

1

2

3

4

5

6

7

8

V-R171P-HDA

V-R171P-HDA

Users Guide

Users Guide

Warranty

9

• SXGA Resolution 1280 × 1024 pixels, 1.3 million total RGB pixels produce 16.7 million colors

• Bright 300 candle luminance

• Compact design fits in EIA standard rack 8U high

• VESA 75 mount for wall, ceiling or desk top

• Automatic Gamma Correction

• 16:9 or 4:3 aspects

• 4 Preset color temperatures

• Self-powered tally system

• NTSC/PAL operation

• 170° CRT style viewing angles

• 12 VDC 4-pin XLR power connector with external power supply

• V-Mount battery adapter

1

Product Overview

The V-R171P-HDA is a rack-mounted monitor with a 17”, 5 : 4 aspect ratio active matrix LCD/TFT module. Mount­ing can also be achieved via a VESA 75 reinforced mount point on the rear of the unit. The display will produce a
high-resolution 1280H x 1024W SXGA image from a computer or display scaled video images. Component video,
Composite video or Y/C (S-video) images are displayed via a scaling chip with a separate DVI-D input for video or
computer. The unit is designed to fi t into an EIA standard 19” rack and occupies 8RU of space. For ease of opera­tion the V-R171P-HDA includes front mounted selector buttons for menu operations with On Screen Menu Display
(OSD) and “ON AIR” tally.
A U.L. Class 2 power supply is included and the unit is factory ready for rack mount installation.

2

Features

2

V-R171P-HDA

V-R171P-HDA

Users Guide

Users Guide

3

Specifications

Display (Viewing Area) 17” (13.30” × 10.64”) (337.92mm x 270.34mm)
Screen Format 4 x 5

Resolution (Dots) 1280H x 1024V
Dot Pitch 0.264 square pixel
Screen Treatment Anti-Glare and Anti-scratch Hard Coat

Brightness (in cd/m²) 300 cd/m²
Pixel Response 13ms Maximum - Black to White to Black (3ms rise, 10 ms decay)
Viewing Angle 75° to 85° From Center
Backlight CCFL 50,000 hour
Contrast Ratio 500:1
System NTSC / PAL

Inputs

1 S-Video (4 Pin Mini Din), 1 Composite (BNC), 1 SXGA (15P HD-15),
Component Video (3 BNC), DVI-D (Digital only), Power (4 Pin Male XLR),
Tally (15 Pin HD-15)

Rack Mount Dimensions 19.12”W × 13.8”H × 3.0”D (48.5cm x 35cm x 7.62cm)

Desk Top Dimensions 17”W x 13.8”H x 3.0”D (43.2cm x 35cm x 7.62cm)

Approx. Weight 12.5 lbs (5.7kg)

Power Consumption 12 VDC from included power supply (70Watt Max)

Operating Temperature 0°C to 50°C (Storage -20°C to +60°C)

4

Operational Setup

1. Unpack the V-R171P-HDA and accompanying power supply. Physically inspect for any damage that may have occurred
during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not
located within the continental united states call [phone].

2. Install in your desired location.

3. Connect required cables for signal input and output.

4. Attach battery (Optional) or power connection from power supply to the back of the unit.

5. Plug the power supply into the A.C. source

6. Turn on the V-R171P-HDA by depressing the power switch located on the front of the unit.
Refer to Page 4 picture for location of switch settings.

7. Perform input selections and screen adjustments as detailed in following sections of this document.

5

Connectors

Tally IN HD-15 Female

12 VDC from

Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Ground
Pin5- Ground
Pin6­Pin7-

in8­Pin 9­Pin10­Pin11­Pin12­Pin13­Pin14­Pin15-

power supply

4 Pin Male XLR

Pin 4 - Pos

Pin 1- Neg

Component Video

75Ω Terminated

DVI-D In

Pin1-Red IN
Pin2-Grn IN
Pin3-Blu IN
Pin4-
Pin5-
Pin6-Gnd
Pin7-Gnd
Pin8-Gnd

SXGA IN

HD-15 Female

Pin 9­Pin10­Pin11­Pin12­Pin13­Pin14-HSync
Pin15-VSync

S-Video IN

4 Pin Din (Female)

Pin1 - GND
Pin2 - GND

Composite

Video

75Ω Terminated

Pin3 – Y in
Pin4 – C in

Marshall Electronics

3

V-R171P-HDA

Users Guide

6

Front Panel Indicators and Controls

Dual Function EXIT button

(Selection Displayed lower right of screen)

1- Cycles Input selection

2- Exits OSD Menu Mode

Tally Indicators

Power On/Off selec-

tion button

Illuminates dim

red when power is

applied.
Turns bright red
when monitor is

switched on

7

Menu Functions

Note: MENU select will toggle through 5 menus, FUNCTION, PICTURE, AUDIO (NOT USED), TV-SETUP and WINDOW

On Screen Display

(OSD)

MENU Activation

Button

UP / DOWN / LEFT / RIGHT

menu selections for OSD functions

Function Menu

Use UP/DOWN/LEFT/RIGHT buttons to select function.
LANGUAGE-English, French, Spanish
AUTO ADJUST- Used for PC and DVI signals to auto fi t

image to screen.
OSD TIME-OUT - Set time in seconds (0 to 60) for OSD
to drop from screen after last button push
SLEEP TIMER- Used to automatically turn monitor off
after programmed delay

4

Use UP/DOWN/LEFT/RIGHT buttons to select function.
PSM - (Picture Status Memory) Used only with video signals.

Select one of four choices
STANDARD- Default brightness, contrast and color.
DYNAMIC- Brightness, contrast and color adjusted for changes
in source video.
CINEMA- Brightness, contrast and color adjusted for viewing in
a darkened environment.

CUSTOM- User defi ned picture adjustment.
COLOR TONE- Select from four presets or create a user de-

fi ned color temperature.
STANDARD- 6900° Kelvin
WARM 1- 6500° Kelvin
WARM 2- 6100° Kelvin

V-R171P-HDA

Picture Menu

Users Guide

CUSTOM- User defi ned
COOL 2- 7500°Kelvin
COOL 1- 7200° Kelvin

5

Marshall Electronics

Use UP/DOWN/LEFT/RIGHT buttons to select function.
SEARCH AND TUNE FUNCTIONS ARE NOT USED ON
THE V-R171P-HDA

Use CCD functions for VIT close caption display

TV SETUP

Use UP/DOWN/LEFT/RIGHT buttons to select function.
ASPECT RATIO -

Select Fill All to place image on the entire screen.
All video images will appear distorted
Select WIDE for 16:9 Aspect
Select ZOOM 1 for 5:4 Aspect
Select ZOOM 2 for 4:3 from 16:9
PIP FUNCTIONS - Used with PC selected as source to
add a window for video input. (PIP SOURCE)

WINDOW

Resolution H Frequency

( kHz )

V Frequency

( Hz )

Pixel Frequency

( MHz )
640x400 37.861 85.08 31.5
640x350 31.469 70.087 25.175
640x350 37.861 85.08 31.5
640x480 31.469 59.94 25.175
640x480 35.000 66.667 30.24
640x480 34.940 69.884 28.513
640x480 37.861 72.809 29.765
640x480 37.500 75.0 31.5
640x480 43.269 85.008 36.0
720x400 31.469 70.087 28.322
720x400 37.927 85.039 35.5
800x600 35.156 56.25 36.0
800x600 37.879 60.317 40.0
800x600 43.764 70.02 45.513
800x600 48.077 72.188 50.0
800x600 46.875 75.0 49.5
800x600 53.674 85.061 56.25
1024x768 48.780 60.001 64.11
1024x768 48.363 60.004 65.0
1024x768 56.476 70.069 75.0
1024x768 57.703 72.039 78.476
1024x768 60.030 75.029 78.75
1024x768 68.677 84.997 94.5
1280x720 47.760 60.0 74.481
1280x768 47.700 60.0 80.136
1280x768 60.150 75.0 102.977
1280x960 60.000 60.0 102.104
1280x960 59.640 60.0 102.104
1280x1024 63.337 59.978 108.18
1280x1024 63.981 60.02 108.0
1280x1024 64.754 60.06 108.992
1280x1024 63.600 60.0 108.883

PC Formats supported from VGA and DVI connectors Video Formats Supported By Component and DVI Inputs

720x480 Interlaced 15.735 59.94 13.500

720x576 Interlace 15.735 50.0 13.595

720x480 Progressive 31.469 59.94 25.175

1280x720 Progressive 44.964 59.94 74.176

1920x1080 Interlaced 33.750 60.0 74.25

Video Formats Supported by
Composite and S-Video Inputs

720x480 Interlaced 15.735 59.94 13.500

720x576 Interlaced 15.735 50.0 13.595

8

Standard Accessories

Accessories Supplied with the V-R171P-HDA:

• Users manual

• “Brick” type 12VDC power supply with 4 Pin Female XLR connector

• “V” Mount battery adapter

• VESA 75 Mount

9

Optional Accessories

Desk Stand Use for Desk Top

Wall Mount V-LCD17-TV-WM Attaches monitor to Wall

Ceiling Mount V-LCD17-TV-CM Attaches monitor to ceiling

Power Adapter Cable V-PAC-D Use with Anton Bauer D-type connection

Power Adapter Cable V-PAC-XLR Use with Anton Bauer D-type connection

Sequential
2 channel charger

IDX-VL-2Plus Combination unit is a 2-channel sequential charger with a

built-in 60W power supply. Charges 2 ENDURA E series
batteries in fewer than 5 hours. One 10’ XLR cable included.

Sequential
4 channel charger

IDX-VL-4 Economically charges 4 ENDURA E series batteries in

under 6 hours using Full Power Charge (FPC) method

Simultaneous
4 channel charger

IDX-VL-4S

Charges 4 ENDURA E series batteries in 2.5 hours or less.

55 W Lithium Battery

IDX-E7S

V-Mount battery pack with 3 LED power Indicator

55 W Lithium Battery
with Power Link

IDX-E7 V-Mount Battery Pack with PowerLink includes accurate

Power Status Display and supports Digi-View

82 W Lithium Battery IDX-E10S V-Mount battery pack with 3 LED power Indicator.

82 W Lithium Battery
with Power Link

IDX-E10

V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View

Analog to Digital
Converter

BC-0909-AD Converts analog Composite, YC, or Component video to

HDSDI/SDI

Digital to Analog
Converter

BC-0909-DA Converts SDI/HDSDI to analog Composite, YC, or

Component video

Cleaning Wipes V-HWP-K Package of 10 non-toxic, antistatic, alcohol and ammonia

free cleaning wipes.