Page 1
1
VAC-HT48-POE-R
4K HDBaseT HDMI Receiver
User Manual
v.1-2
Page 2
2
Table of Contents
Introduction.................................................................................................................................…………………….....3
Features......................................................................................................................................……………………....3
Package Contents........................................................................................................................………………….......3
Specifications...........................................................................................................…………………...........................4
Connection Diagram.......................................................................................…………………….........................5
Panel Descriptions.......... ....................................................................................……………………............................6
IR Receiver………..................................................................................……………………............................6
Notice...................................................................................................................................…………………….........7
Warranty.....................................................................................................................................…………………….....7
IMPORTANT SAFETY INSTRUCTIONS:
The VAC-HT48-POE-R 4K HDBaseT HDMI Receiver has been tested for conformance to safety regulations and
requirements, and has been certified for inter national use. H owever , like all electr onic equipment, t he VAC-HT48-POER should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and
to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Page 3
3
1. Introduction
The VAC-HT48-POE-R 4K HDBaseT Receiver converts HDBaseT to HDMI and provides power & control options for local &
remote devices.
HDMI cables can only cover relatively short distances. The VAC-HT48-POE-R guarantees up to UHD 3840 x 2160p 29.97Hz
video over Cat.6a/7 cable for distances up to 100m.*
The VAC-HT48-POE-R supports HDMI uncompressed video, audio, Bi-directional IR, RS-232/485 communications. It provides
POE (13.5 Watts) power for the remote device and 12VDC / 0.9A for local acces sories.
Typical system setup:
*NOTE: Distance depends on the quality of the CAT.X cable.
2. Features
•
HDMI 1.4
•
POE (Watts TBD)
•
HDCP & EDID Transparent
•
Auto equalization
•
Uncompressed 7.1ch digital HDMI over Cat5e/6/7 cable transmission
•
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
•
Bi-directional IR path-through signal from 20KHz to 60KHz
•
Wall mounting housing design for easy and secure installation
3. Package Contents
•
1x VAC-HT48-POE-R
•
1x IR receiver
•
1x 100-240V 50/60Hz to 48VDC power adaptor with C7 power cord
•
1x 4-pin female terminal block (for RS232/485 and 12VDC accessory power output)
Page 4
4
4. Specifications
VAC-HT48-POE-R
Function
4K HDBaseT HDMI Receiver
HDMI compliance
1.4
HDCP compliance
Yes
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
1280 x 720p 50/50.94Hz
1920 x 1080i 50/59.94Hz
1920 x 1080p 50/59.94Hz
3840 x 2160 25/29.97Hz
HDMI over UTP
Cat.5e/6: up to 1920 x 1080p 59.94Hz 100m
Cat.6: up to 3840 x 2160p 29.97Hz 70m
Cat.6a/7: up to 3840 x 2160p 29.97Hz 100m
Audio support
8-channel
Equalization
Auto
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
IR pass-thru
Bi-directional
RS-232 support
Yes
RS-485 support
Yes
POE support
Yes
Input connectors
1x RJ-45
Output connectors
1x HDMI
1x 3.5mm (IR Blaster)
HDMI source control
Via IR pass through or RS232/485 control
HDMI connector
Type A [19-pin female]
Mechanical
VAC-HT48-POE-R
Housing
Metal enclosure / Wall mount
Dimensions
[L x W x H]
Model
126 x 77 x 25mm [5" x 3" x 1"]
Package
198 x 137 x 74mm [7.8" x 5.4" x 2.9"]
Carton
420 x 400 x 300mm [1'4"x 1'3" x 11.8"]
Weight
Model
215g [5.3oz]
Package
790g [1.7 lbs]
Fixedness
Wall-mounting case with screws
Power suppl y
48V 0.83 Amps DC
Power consumption
32 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
Page 5
5
5. Connection Diagram
4K HDBaseT HDMI Receiver
Page 6
6
6. Panel Descriptions
Front Panel
1. LED: Power LED, Status LED, Link LED, HDCP LED
(1) Powe r LED: Always ON = OK
(2) Status LED: Blinking = OK
(3) Link LED: Always ON = OK
(4) HDCP LED: Always ON = HDCP ON
Blinking = HDCP OFF
2. USB Type B jack for firmware updates
3. Dip Switch:
1 ON, 2 OFF: Firmware update
1 ON, 2 ON: RS232 mode
1 OFF, 2 ON: RS485 receiver
1 OFF, 2 OFF: RS485 transmitter
Rear Panel
4. Power Jack: Connect to 24V DC power supply
5. Accessory Power Out and Data conn ections (Pin
1 is left most as shown)
• Pin 1: +12VDC out
• Pin 2: TX
• Pin 3: RX
• Pin 4: Ground
6. IR Receiver: Infrared 3.5mm socket for plugging in
the extension cable of IR receiver
7. HDMI OUT: Connects to a HDMI destination with
HDMI male-male cable
8. RJ45: Plug in a Cat5e/6/7 cable that needs to be
linked to the source
7. IR Receiver
*Please note: IR cables longer than 2m (6ft) may not function properly.
Page 7
7
8. Notice
1. The transmission length is largely affected by the type of CAT5e/6/6a/7 cables, the type of HDMI sources, and the type of
HDMI display. The testing result shows solid UTP cables (usually in the form of 300m [1,000ft] bulk cables) can transmit a
lot longer signals than stranded UTP cables (usually in the form of fixed length patch cords). Shielded STP cables are
better suited than unshielded UTP cables. A solid UTP Cat-5e cable shows longer transmission range than stranded STP
Cat-6 cable. For long extension applications, solid UTP/STP cables are the only viable choice.
2. EIA/TIA-568-B termination (T568B) for CAT5e/6/6a/7 cables is recommended for better performance.
3. The quality of CAT X cables on the market may vary greatly. Reducing the number of RJ45 patches, using higher quality
cable and choosing a higher Cat X number will invariably yield better results.
9.
Warranty
Marshall Electronics warranties to the first consumer that this HDBaseT Extender KIT will, under normal use, be free from
defects in workmanship and mat erials, w hen re ceiv ed in its origin al container, for a peri od of one year from t he pur chase date.
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no
proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth
above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or
cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. No sales
personnel of the seller or any other pe rson is authoriz ed to make a ny warranties other than those describ ed above, or to extend
the duration of any warranties on behalf of Marshall Electronics, beyond the time period des cribe d abov e.
Note:
Due to constant effort to improve products and product features, specifications may change without prior notice.
Page 8
8
A division of Marshall Electronics, Inc.
20608 Madrona A v enue
Torrance, CA 90503
Phone: (310) 333-0606 / (800) 800-6608
Fax: (310) 333-0688
www.marshall-usa.com
support@marshall-usa.com
Loading...