1
ROTARY MUCK SPREADERS
OPERATING & SAFETY INSTRUCTIONS
FOR SPARE PARTS GO TO
WWW.MARSHALL-TRAILERS.CO.UK
FOR MODELS:
MS45, MS60, MS75, MS90, MS105
CHARLES J. MARSHALL (ABERDEEN) LTD
CHAPEL WORKS, BUCKSBURN, ABERDEEN, AB21 9TL.
Telephone: 01224 722777 Fax: 01224 724034
Email: charles@marshall-trailers.co.uk
www.marshall-trailers.co.uk
2
EC DECLARATION OF CONFORMITY
WE: CHARLES J. MARSHALL (ABERDEEN) LTD
CHAPEL WORKS, BUCKSBURN, ABERDEEN, SCOTLAND, AB21 9TL.
DECLARE THAT THE PRODUCT:
MAKE: CHARLES J. MARSHALL (ABERDEEN) LTD
TYPE: MARSHALL ROTARY MUCKSPREADER
MODEL: _______________________________
SERIAL NO: ______________
CONFORMS TO THE ESSENTIAL HEALTH & SAFETY REQUIREMENTS
OF 98/37/EC MACHINERY DIRECTIVE AS AMENDED BY 2006/42/EC
DIRECTIVE.
PLACE OF ISSUE – CHAPEL WORKS, BUCKSBURN,
ABERDEEN, SCOTLAND, AB21 9TL.
NAME & TITLE OF AUTHORISED PERSON:
CHARLES R. MARSHALL
MANAGING DIRECTOR
DATE: ___________
WE ENCLOSE OUR INSTRUCTIONS FOR THE SAFE OPERATION OF
THIS MACHINE, THE WORKING OF WHICH IS FULLY UNDERSTOOD
BY THE UNDERSIGNED.
CUSTOMER’S SIGNATURE: _____________________ DATE: ___________
3
SAFETY INSTRUCTIONS
Important Safety advice!
1. STOP
2. THINK
3. CALL 01224 722777
Safety First: Please read and fully understand the contents of this
instruction manual, if you are in any doubt whatsoever of the safe
operation of this machine, please contact Charles J. Marshall (Aberdeen)
Ltd on Tel. 01224 722777.
1. Guards - Ensure all guards are securely fastened in place.
2. Maintenance - Ensure the machine and tractor is completely stopped prior to carrying
out any maintenance.
3. PTO Shaft - Safety is important, if you are in any doubt of how to fit the PTO shaft,
please contact our service department.
4. Always apply the parking brake when the Muck Spreader is to be left unhitched
from the tractor.
OPERATING INSTRUCTIONS
YOUR MARSHALL MUCKSPREADER HAS BEEN DESIGNED TO GIVE YOU LONG
AND RELIABLE SERVICE. THIS CAN BE ENSURED BY FOLLOWING THE
INSTRUCTIONS BELOW.
OPERATING
Operating the Muck Spreader – Open the hydraulically operated lid to allow for better access.
It is advisable that you do not cover the starters at either end of the main rotor shaft with solid
type muck as this will significantly increase the time the spreader will take to get started. Once
you have loaded the spreader close the hydraulic lid, if the spreader is over filled this will not
matter, simply place the hydraulic lever in the float position and when the spreader starts it will
continue closing. Start the PTO shaft at low engine revs and increase the speed until you are
satisfied with the spread rate and pattern. As the spreader continues and the flail chains get to
work it will be necessary to either increase the forward speed or decrease the rotor speed to
keep the same spread rate and pattern. When the load is discharged always reduce the engine
revs to idling prior to shutting off the PTO shaft.
1. Always disengage PTO shaft when turning.
2. Never spread with the muck spreader lid in the open position.
3. Always couple the spreader brakes and lights up every time you use the spreader
this reduces the chance of corrosion and the brake mechanism seizing due to
lack of use.
Loading...