Marshall Amplification MID Bluetooth User Manual

Page 1
MID BLUETOOTH – ON EAR
USER MANUAL
h_Marshall-Mid-user-guide-160819.indd 1 2016-08-19 15:30
Page 2
MID IS A PREMIUM BLUETOOTH® aptX HEADPHONE THAT DELIVERS SUPERIOR AUDIO AND 30+ HOURS OF PLAYTIME ON A SINGLE CHARGE*. ITS CUSTOM 40MM DYNAMIC DRIVERS LEND IT A ROBUST SOUND THAT BALANCES CLARITY WITH JUST THE RIGHT AMOUNT OF BASS – PERFECT FOR THOSE WHO DEMAND THE BEST IN SOUND. THE ON-EAR DESIGN FEATURES A PLUSH HEADBAND AND 3D HINGES THAT PRODUCE AN ERGONOMIC FIT. COMPLETE WITH BLACK VINYL, SOLID METAL HINGES AND BRASS DETAILS MID IS THE EMBODIMENT OF MARSHALL IN A HEADPHONE
A. POWER BUTTON /
CONTROL KNOB
B. MICRO USB SOCKET
FOR CHARGING
C. 3.5MM INPUT/
OUTPUT SOCKET
D. LED INDICATOR
E. MICROPHONE
DEVICE LAYOUT
B
D
C
E
A
A. CONTROLS
NEXT SONG: PUSH THE CONTROL KNOB TO THE RIGHT.
ANSWER INCOMING CALL: SINGLE CLICK THE CONTROL KNOB.
PREVIOUS SONG: PUSH THE CONTROL KNOB TO THE LEFT.
REJECT OR END CALL: DOUBLE CLICK THE CONTROL KNOB.
TURN VOLUME UP: PUSH THE CONTROL KNOB UPWARD.
PLAY OR PAUSE A SONG: SINGLE CLICK THE CONTROL KNOB.
TURN VOLUME DOWN: PUSH THE CONTROL KNOB DOWNWARD.
*Calculated with randomly selected music
content playing at medium volume
001 ENGLISH
h_Marshall-Mid-user-guide-160819.indd 1 2016-08-19 15:30
Page 3
B. CHARGING
THE RED BATTERY INDICATOR STARTS BLINKING WHEN THE BATTERY LEVEL IS LOW.
1. PLUG THE INCLUDED USB CABLE INTO THE MICRO USB SOCKET ON THE HEADPHONE.
2. PLUG THE OTHER END OF THE CABLE INTO A USB POWER SOURCE. THE RED BATTERY INDICTATOR STAYS LIT WHEN CHARGING.
3. WHEN THE BATTERY IS FULLY CHARGED, THE BATTERY INDICATOR TURNS WHITE.
NOTE: CHARGE THE BATTERY BEFORE USING THE HEADPHONES THE FIRST TIME. 2 HOURS CHARGE GIVES APPROXIMATELY 8 HOURS OF PLAYBACK AT MEDIUM VOLUME.
1 32
A. POWER ON/OFF D. BLUETOOTH® PAIRING
= =
1. WHEN POWERED ON, DOUBLE CLICK THE POWER BUTTON ON THE HEADPHONES.
2. THE BLUETOOTH PAIRING INDICATOR STARTS FLASHING BLUE. ENABLE BLUETOOTH ON YOUR DEVICE. SELECT “MID” IN THE BLUETOOTH LIST AND ACCEPT PAIRING.
3. THE INDICATOR TURNS OFF WHEN THE PAIRING IS COMPLETED.
NOTE: AFTER THE INITIAL PAIRING, THE HEADPHONES WILL AUTOMATICALLY CONNECT TO THE DEVICE WHEN TURNED ON AGAIN.
1. PUSH AND HOLD THE POWER BUTTON FOR 4 SECONDS TO TURN ON.
2. PUSH AND HOLD THE POWER BUTTON FOR 4 SECONDS TO TURN OFF.
NOTE: IF NOT CONNECTED TO A SOUND SOURCE THE HEADPHONES WILL AUTOMATICALLY TURN OFF AFTER 10 MINUTES.
1 31
2
2
00:04
00:04
MID
002ENGLISH
h_Marshall-Mid-user-guide-160819.indd 2 2016-08-19 15:30
Page 4
A. PHONE FUNCTIONALITY C. SHARING
REMOVABLE EAR CUSHIONS COLLAPSIBLE
C. DETACHABLE 3.5 MM CORD
WIRELESSLY ANSWER, REJECT OR END A CALL USING THE CONTROL KNOB.
USE THE EMPTY 3.5MM SOCKET TO SHARE YOUR AUDIO.
HOLD THE EAR CUSHION AND TURN IT COUNTER-CLOCKWISE. COLLAPSIBLE DESIGN FOR EASY TRANSPORT AND STORAGE.
IF YOU ARE LOW ON POWER, SIMPLY PLUG IN THE DOUBLE-ENDED CORD WITH BUILT IN MICROPHONE AND REMOTE. COMPATIBLE WITH ANY MUSIC PLAYER THAT ACCEPTS A 3.5 MM PLUG.
MICROPHONE:
THE BUILT-IN MICROPHONE ALLOWS YOU TO TAKE CALLS OR RECORD VOICE MEMOS THROUGH YOUR DEVICE.
REMOTE:
CLICK ONCE TO ANSWER INCOMING CALLS OR HANG UP, AS WELL AS TO PLAY AND PAUSE YOUR MUSIC. CLICK TWICE TO FAST FORWARD YOUR MUSIC. CLICK THREE TIMES TO REWIND.
003 ENGLISH
h_Marshall-Mid-user-guide-160819.indd 3 2016-08-19 15:30
Page 5
TECHNICAL INFO
TRANSDUCER:
• 40 MM, DYNAMIC
IMPEDANCE:
• 32 OHM
FREQUENCY RANGE:
• 10 Hz-20 kHz
SENSITIVITY:
• 100 mV @ 1 kHz = 95 dB SPL
NOT POWERING ON
NOT CHARGING
NOT PAIRING
NO SOUND
POOR SOUND QUALITY
CHARGE THE HEADPHONES USING THE USB CABLE.
MAKE SURE THE USB POWER SOURCE IS SWITCHED ON.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE OR OBSTRUCTION. MAKE SURE THE HEADPHONES ARE NOT CONNECTED TO A DIFFERENT SOUND SOURCE WHEN ENTERING
THE PAIRING MODE. DISABLE AND ENABLE BLUETOOTH COMMUNICATION ON YOUR SOUND SOURCE.
MAKE SURE THE HEADPHONES ARE ON AND CONNECTED. MAKE SURE THE SOUND SOURCE IS PLAYING.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE OR OBSTRUCTION
TROUBLESHOOTING
004ENGLISH
h_Marshall-Mid-user-guide-160819.indd 4 2016-08-19 15:30
Page 6
WARNINGS
Contains small parts which may be a choking hazard.
Not suitable for children under age three.
• Set a low volume setting before using the headphones.
• Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods.
• Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or others.
• Do not drop, sit on, or allow the headphone to be immersed in water.
• Keep away from fire, water, and high voltage equipment.
• Do not modify, disassemble, open, drop, crush, puncture, shred the headphone or heat above 140°F (60°C).
• Do not short-circuit the included battery or its cells.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. This product was produced after Jan 1 2006.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Marshall is a trademark of Marshall Amplification Plc. Permission granted. Design of product and packaging are intellectual properties of Zound Industries International Ab.
© 2016 Zound Industries. All rights reserved. Produced in China. Zound Industries International AB makes no claims of compatibility of the microphone and remote with any mobile device. For use with cellphone using 3.5 mm plug unprotected two-way standard. Zound Industries International AB • Centralplan 15 • 111 20 Stockholm • Sweden
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license.
USER GUIDE
IMPORTANT SAFETY INSTRUCTIONS
005 ENGLISH
h_Marshall-Mid-user-guide-160819.indd 5 2016-08-19 15:30
Page 7
C
AUTIONS
Using these headphones limits your ability to hear noises around you,
regardless of listening volume. Please use caution when using these
headphones.
Do not drop,
sit on, or allow the headphones to be immersed in water.
The pads tha
t accompany these headphones may
deteriora
te over time. Please make sure to use suitable pads on the headphones at all times.
FCC WARNING
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from tha
t to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC WARNING
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. This Class B digital apparatus complies with Canadian ICES-003.
ADMINISTRATIVE REGULATIONS ON LOW POWER RADIO WAVES RADIATED DEVICES WARNING:
ARTICLE 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. ARTICLE 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
Hereby, Zound Industries International AB, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive R&TTE 1999/5/EC and the RoHS directive 2011/65/EU. For the declaration of conformity, please visit the following website: http://www
.marshallheadphones.com
F
or any questions or concerns contact
support@marshallheadphones.com
Zound IndustriesInterna
tional AB • Centralplan 15 • 111 20 Stockholm • Sweden
h_Marshall-Mid-user-guide-160819.indd 6 2016-08-19 15:30
This enquioment should be installed and operated with mininum distance 20mm with your body.
This equipment should be installed and operated with minimum distance 20mm between the radiator& your body. Note: This
Page 8
VERTISSEMENT IC
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Note
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Page 9
WWW.MARSHALLHEADPHONES.COM
h_Marshall-Mid-user-guide-160819.indd 85 2016-08-19 15:34
Loading...