Marshall Amplification CV6-DH Installation Manual

Broadcast A/V Division

CV6XX-DH

Outdoor Dome Housing

Installation Instructions

CV6XX-DH Installation Instructions

Table of Contents

1. Warning

2. Installation Instructions

3. Assembly of Cables

4. Wall Mount Bracket and Dome Housing Installation

5. Appendix

Safeguards

Warranty

03

04

05

06

09

10

11

1. Warning

WARNING

WARNING

To reduce the risks of an electric shock, do not expose inside of this unit to rain or
moisture.

Installation on a rainy day may also cause fog around the capsule.

Installation

Installation should be done by qualified installer only and should conform to all local
codes.

Ensure strength of Supporting Dome Housing Unit

The unit must be properly and securely mounted to a supporting structure capable
of sustaining the weight of the unit. Recommend use 3/8” stainless screws x four (4).

Do Not Change or Modify

You are cautioned that any changes or modifications not expressly informed by these
instructions could void your warranty and ability to properly operate this equipment.

Basic Operating Environment Conditions

This product is designed to function under normal outdoor -20°C (-4°F) ~ +50°C
(122°F) conditions. Operation in constant high temperatures over +50°C (122°F) and
over 90% humidity is not advised, and may void your warranty.

For use in conditions -20°C (-4°F) or below, it is recommended to install an additional
heater and +50°C (122°F) or above it is recommended to install two fans and a
sunshield.

Operating temperature and humidity of camera varies from camera to camera. For
use with non-Marshall cameras, check with the manufacturer prior to use.

Fasten wires tightly.

Attention:

Please keep any loose wires away from the fan or heater.

www.marshall-usa.com2 3