
1080 HD-SDI Weatherproof Miniature Came ra
CV225-M (Signal type: 1080i/p 60 or 1080i/p 30)
CV225-MB (Signal type: 1080i/p 59.94)
NAME and CONNECTION SPECIFICATIONS
Image Sensor 1/3” Progressive CMOS (Approx. 2.5 mega)
Scanning System 16:9 Progressive
Effective Pixel 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Horizontal Resolution 1,000TVL
Optics Lens Fixed HD lens
HLC (High Light compensation)
Day & Night System AGC / TDN (ICR)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
800mVp-p, 75Ω, unbalanced generator(single-ended)
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
SDI (BNC)
RS-485
Video
Output
Control
Sensor
Functions
Back Light Compensation
White Balance
Electronic Shutter
Functions
OSD Control
RS-485
12VDC
SDI Out
OSD Control
CV226 Quick Start Guide
Lipstick HD Camera with 3GSDI www.marshall-usa.com
Do not use the camera if fumes, smoke or a strange odor is emitted
!
WARNING
CAUTION
CAUTION
from the unit, or if it seems to not function correctly. Disconnect the
power source immediately and consult your supplier.
Always follow the instructions in the installation guide when
applying power. Fire and equipment damage can occur if power
is applied incorrectly. For the correct power supply, refer to the
Do not install or operate in small, unventilated areas. Heat build up
CAUTION
CAUTION
CAUTION
CAUTION
To prevent damage, do not drop the camera or subject it to strong
shock or vibration.
If installed close to a TV, radio transmitter, magnet, electric motor
interfere with or distort the image.
Whether or not the camera is used outdoors, never point it toward
the sun. Use caution when operating the camera in the vicinity of spot
Do not use the camera in extreme environments where high
temperatures or high humidity exists. Use the camera under
conditions where temperatures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is below 90%.
Features
Full-sized 3G/HDSDI (BNC) output
2.5 Megapixel (1/2.86") sensor (4:2:2 color)
10-foot (3 meter) breakout cable with BNC (3GSDI), RS485 remote adjust,
and locking 12V power
Interchangeable M12 lens with IP67 cap includes stock 3.6mm lens (72°H.
AOV)
IP67-rated weatherproof housing; submerge in water up to 10-feet for several
hours
Full-HD resolutions: 1920 x 1080p, 1920 x 1080i and 1280 x 720p
Frame rates: 60, 59.94, 50, 30, 29.97, 25, 24, 23.98 fps
Remote adjustable through RS485 (Visca) or OSD menu joystick
CV-RCP-V2 Touchscreen RCP compatible and free Camera Control Software
option
Wide range of picture adjustment settings including white balance, color, gain
control, pedestal (blacks), white clip, exposure, gamma, and more
Sensor
Optics Lens M12 3.6mm
CV226 Specifications
Image Sensor
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1944(H) x 1212 (V)
Min. Illumination
Horizontal
Resolution
Back Light
Compensation
Connectors
Exposure
Functions
Video
Outputs
DIMENSIONS
CV226 Dimensions
62.5
Control
19.5
19.5
Interface
General
White Balance Auto / ATW / Manual / Push
Electronic Shutter 1/1 ~ 1/30000
Functions
SDI
RS485
Operation
Temperature
Power Input 12VDC (7VDC to 15VDC)
Power
Consumption
1/2.86" Progressive CMOS
(Approx. 2.4 Mega)
0.2Lux(Day), 0.1Lux(Night),
0.005Lux(DSS on)
1000TVL
WDR, BLC, Spot
Auto / Manual Shutter /
Flickerless
Privacy Mask, Image Mirror/
Flip, DNR, D-Zoom, Defog, DIS
(Digital Image Stabilizer)
SMPTE 292M (1.485Gbps):
1920x1080p @25, 29.97, 30 fps
/ 1920x1080i @50, 59.94, 60
fps / 1280x720p @25, 29.97,
30, 50, 59.94, 60 fps
SMPTE 424M(2.97Gbps):
1920x1080p @ 50, 59.94, 60
fps
800mVp-p, 75Ω, unbalanced
generator (single-ended)
Sony VISCA protocol
8 bits data, 1 stop bit, no parity,
2400 ~ 115200 bps
-10 C ~ 50 C
Max 6W
Marshall Electronics