ACTON - ACTIVE STEREO LOUDSPEAKER
USER MANUAL
001. SAFETY INSTRUCTIONS
002. COMPLIANCE MARKS
003. LANGUAGE INDEX
005. THE ACTON
006. BOX CONTENTS
008. GENERAL DESCRIPTION
010. TURNING THE POWER ON/OFF
012. USING THE ACTON WITH
YOUR DEVICES
013. CHOOSING YOUR SOURCE
014. BLUETOOTH CONNECTION
018. CABLE CONNECTION
020. STANDBY MODES
022. ADJUSTING SOUND
023. TECHNICAL INFORMATION
024. TROUBLE SHOOTING
225. WARRANTY INFO
WWW.MARSHALLHEADPHONES.COM
If you believe your product is defective or needs servicing or
repair within the warranty period, please refer to the instructions
on http://www.marshallheadphones.com/support/warranty/
warranty-hifi-speakers.
For any questions or concerns contact:
support@marshallheadphones.com
Or join us on:
facebook.com/marshallheadphones
twitter.com/marshallhp
Marshall Headphones
C/O Zound Industries International AB,
Box 6063, 10231 Stockholm Sweden
*PLEASE NOTE: Zound Industries does not accept products shipped to our address.
Marshall is a trademark of Marshall Amplification Plc. Permission granted.
Design of product and packaging are protected intellectual properties of Marshall
Amplification Plc and Zound Industries Int. Ab. © 2014 Zound Industries. All rights reserved.
Designed in Stockholm. Produced in China.
*
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions – All the safety and operating instructions should be read before this product
is operated.
• Keep these instructions – The safety and operating instructions should be retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions – All operating and use instructions should be followed.
WARNING!
• WARNING – To reduce the risk of re or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects lled with liquids,
such as vases, shall not be placed on apparatus.
• WARNING – do not cover.
• WARNING – only use attachments/accessories specied by the manufacturer (such as the exclusive
supply adapter, battery etc).
• WARNING – the plug is the main disconnect device and should be used as such. The
disconnect device should remain readily accessible.
• WARNING – this active loudspeaker may emit high sound pressure levels.
• WARNING – do not listen too close to the active loudspeaker.
• WARNING – do not listen for an extended period of time at a high sound pressure level.
• WARNING – do not attempt to remove the active loudspeaker chassis, there are no user serviceable
parts.
• WARNING – do not plug a guitar into the WOBURN.
• WARNING – do not insert body parts or objects into the bass port for risk of injury.
• DANGER – of dropping the product.
• DANGER – of sharp corners.
MOISTURE AND HUMIDITY
• The active loudspeaker should be located in a place free from moisture and water.
• Do not use this apparatus near water. Do not expose it to rain or dripping water. Do not splash water
on it.
INSTALLATION
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
• No naked ame sources, such as lighted candles, should be placed on the active loudspeaker.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/appartus
combination to avoid injury from tip-over.
CONNECTION
• Connect the active loudspeaker according to the instructions in the manual.
• Connect the active loudspeaker only to the correct mains voltage as shown on the equipment.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
• Use only power cables of the type specied in the operating instructions or as marked on the active
loudspeaker. Do not substitute the separate power cable included with this active loudspeaker with
any other power supply – use only the power cable provided by the manufacturer.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Do not install in an area that impedes access to the power plug. Disconnecting the power plug is the
only way to completely remove power to the product and the plug must be readily accessible at all times.
CLEANING
• Clean only with dry cloth.
MAINTENANCE
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• CAUTION: These servicing instructions are for use by qualied service personnel only. To reduce
the risk of electric shock, do not perform any servicing unless you are qualied to do so.
KAGA HIGHTEC CO. LTD
3114849
COMPLIANCE MARKS
CAUTION: To prevent the risk of electric
shock, do not remove cover (or back plate).
There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
This appliance may not be treated as regular
household waste. Management of WEEE (Waste
Electrical and Electronic Equipment) is applicable in member states of the European Union and
other European countries with individual national
policies on the management of WEEE. If you need
more information on the collection, reuse and recycling systems, please contact your local or regional waste administration facility.
Japan PSE Mark. The product complies with
the following standards J60065 (H23), ARIB
STD T-66 Ver.3.6, J55013 (H22).
This product conforms to ANSI/UL Std.
60065 and is Certified to CAN/CSA Std.
C22.2 No. 60065.
The product complies with the following European
directives: the electromagnetic compatibility directive
2004/108/EC. The low voltage directive 2006/95/EC.
This equipment is a Class II or a doubleinsulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
The content of this document is for information purposes only. Zound Industries reserves the right to
change information without prior notifications and at any time.
002.
ENGLISH
SECTIONS
LANGUAGE INDEX
PAGE
001. SAFETY INSTRUCTIONS
002. COMPLIANCE MARKS
003. LANGUAGE INDEX
005. THE ACTON
006. BOX CONTENTS
008. GENERAL DESCRIPTION
010. TURNING THE POWER ON/OFF
012. USING THE ACTON WITH
YOUR DEVICES
FRENCH - FRANÇAIS
PAGE 029
JAPANESE -
PAGE 057
GERMAN - DEUTSCH
PAGE 085
SPANISH - ESPAÑOL
PAGE 113
ITALIAN - ITALIANO
PAGE 141
SIMPLIFIED CHINESE - 简体中文
PAGE 169
日本語
013. CHOOSING YOUR SOURCE
014. BLUETOOTH CONNECTION
018. CABLE CONNECTION
020. STANDBY MODES
022. ADJUSTING SOUND
023. TECHNICAL INFORMATION
024. TROUBLE SHOOTING
225. WARRANTY INFO
TRADITIONAL CHINESE - 繁體中文
PAGE 197
ACTON
THIS UNIT MIGHT LOOK SMALL IN STATURE, BUT DON’T LET THAT FOOL
YOU. THE ACTON IS AN IMPRESSIVE AND COMPACT ACTIVE STEREO
SPEAKER THAT’S PACKING SOME SERIOUS POWER INTO ITS STOUT FRAME.
A NIMBLE AND VERSATILE WORKHORSE, IT JOINS THE MARSHALL FAMILY
WITH A VENGEANCE, CARRYING ON A LONG STANDING TRADITION OF LOUD.
WHEN IT COME TO LOOKS, THE ACTON HAS INHERITED ALL THE FAMILY
TRAITS; BOASTING THAT CLASSIC AND DURABLE VINTAGE DESIGN, AND
ICONIC SCRIPT LOGO THAT IS SO DISTINCTLY MARSHALL. COMPLETING
THE ULTIMATE SETUP IN YOUR KITCHEN, BEDROOM, OR OFFICE, THIS PINT
SIZED SPEAKER WILL BRING STYLE AND SOUND TO EVEN THE SMALLEST
OF SPACES. CONNECT IT WIRELESSLY VIA BLUETOOTH OR SIMPLY USE THE
COIL CORD THAT’S INCLUDED TO YOUR PHONE USING 3.5MM AUXILIARY
INPUT. ACTON’S CUSTOM ANALOGUE CONTROLS ALLOW YOU TO FINE TUNE
YOUR SOUND TO JUST THE WAY YOU DESIRE.
THE ACTON IS A FORCE TO BE RECKONED WITH. WITH A WELL BALANCED
AUDIO BOASTING A CLEAR MIDRANGE AND EXTENDED HIGHS, IT GIVES AN
EXPERIENCE THAT IS BOTH ARTICULATE AND PRONOUNCED. THE ACTON’S
POWERFUL DEEP BASS SEEMS TO DEFY THE LAWS OF NATURE FOR IT’S
SMALL SIZE. IT IS THESE HIFI QUALITIES PACKED INTO A CLASSICALLY
DESIGNED AND COMPACT FRAME THAT SET THE ACTON APART, POSITIONED
TO TAKE ON EVEN THE LARGEST OF COMPETITORS
BOX CONTENTS
001. USER MANUAL & WARRANTY INFORMATION
002. DOUBLE-ENDED COIL CORD WITH 3.5MM STEREO PLUGS TO
CONNECT TO YOUR MUSIC PLAYER
003. POWER CORD
004. MARSHALL ACTON ACTIVE STEREO LOUDSPEAKER
006.
ACTON
CAUTION: LIFT ACTIVE
LOUDSPEAKER FROM BOTTOM.
DO NOT LIFT BY PROTECTIVE
BAG FOR RISK OF DROPPING
THE PRODUCT.
GENERAL DESCRIPTION
001. INPUT FOR 3.5MM
STEREO PLUG
002. LED LIGHT SOURCE INDICATORS
003. VOLUME
004. BASS
005. TREBLE
006. PAIR BUTTON
007. SOURCE/WAKE BUTTON
008. POWER SWITCH
009. STANDBY MODE SWITCH
(POWERSAVER MODE AND
STANDARD MODE)
010. BACK PLATE
011. BASS PORT
012. POWER JACK
013. POWER CORD
008.
011.
NOTE: DATE CODE
AND SERIAL NUMBER STICKER
LOCATED HERE.
ACTON
010.
012. 013. 012. 013.
TURNING THE POWER ON/OFF
001. INSERT THE POWER CORD INTO THE POWER JACK.
002. CONNECT THE CORRECT POWER CORD TO THE WALL SOCKET.
001.
002.
NOTE: DEPENDING ON YOUR
REGION, A POWER CORD WITH AN
APPROPRIATE PLUG IS SUPPLIED.
001. 002.
010.
ACTON
003. TO TURN THE ACTIVE LOUDSPEAKER ON, SWITCH THE ON/OFF
SWITCH. THE LED LIGHT INDICATOR WILL FLASH RED ON THE
SOURCE MARKED AS BLUETOOTH.
004. TO TURN THE ACTIVE LOUDSPEAKER OFF, SWITCH THE ON/OFF
SWITCH. THE LED INDICATOR WILL TURN OFF.
USING THE ACTON WITH YOUR DEVICES
THE ACTON IS A LOUDSPEAKER CREATED FOR TODAY’S WORLD. WITH
MULTIPLE CONNECTION SOURCES, THERE ARE TWO OF WAYS TO CONNECT
TO YOUR SPEAKER, WHETHER VIA YOUR PHONE, TABLET, LAPTOP OR
WIRELESSLY VIA BLUETOOTH®. BELOW YOU WILL FIND MORE DETAILS
ABOUT THE CONNECTION SOURCES, IN TWO CATEGORIES:
• WIRELESS CONNECTION VIA BLUETOOTH
• CONNECTION VIA THE 3.5MM STEREO PLUG
CAUTION: MAKE SURE THAT
THE VOLUME IS SET TO LOW
ON BOTH THE ACTIVE LOUDSPEAKER AND THE MUSIC
PLAYER WHEN YOU START PLAYING MUSIC.
012.
CHOOSING YOUR SOURCE
001. PUSH THE SOURCE/WAKE BUTTON TO CHOOSE YOUR SOURCE AND/OR
TO SWITCH BETWEEN CONNECTED SOURCES.
002. A LIT LED LIGHT INDICATES WHICH SOURCE YOU HAVE SELECTED.
ORDER OF CONNECTIONS (FROM TOP TO BOTTOM):
• BLUETOOTH
• INPUT - 3.5MM STEREO PLUG
002.
CONNECTING VIA BLUETOOTH
WITH THE HELP OF BLUETOOTH TECHNOLOGY, BLUETOOTH-COMPATIBLE
DEVICES CAN EASILY BE CONNECTED TO EACH OTHER OVER A SHORT
WIRELESS CONNECTION. USE YOUR BLUETOOTH-ENABLED SMARTPHONE,
TABLET OR COMPUTER TO STREAM MUSIC DIRECTLY TO YOUR ACTON
WITH NO WIRES ATTACHED. USE YOUR NEWLY FOUND FREEDOM TO MOVE
AROUND WITH ALL YOUR MUSIC AT YOUR FINGERTIPS. FOLLOW THESE
STEPS TO CONNECT YOUR ACTON WIRELESSLY TO YOUR BLUETOOTH
DEVICE.
001. TURN THE ACTON ACTIVE STERO LOUDSPEAKER ON (SEE PAGE 012.).
002. SELECT BLUETOOTH AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE BLUETOOTH LED IS LIT.
003. ACTIVATE THE BLUETOOTH FUNCTIONALITY ON YOUR DEVICE
(SMARTPHONE, TABLET, COMPUTER).
004. PRESS THE PAIR BUTTON. THE LED LIGHT ON THE ACTON WILL
START TO FLASH RAPIDLY IN RED.
005. ON YOUR DEVICE, SELECT THE ACTON SPEAKER FROM
YOUR LIST. THE LED LIGHT ON THE SPEAKER WILL TURN TO A
STEADY RED.
006. YOU ARE NOW READY TO PLAY YOUR MUSIC WIRELESSLY VIA THE
ACTON SPEAKER.
NOTES:
• YOU ONLY NEED TO PAIR YOUR SMARTPHONE/TABLET/COMPUTER WITH THE AC-
TON ONCE, AFTER WHICH THE DEVICE WILL BE INCLUDED IN THE LIST OF YOUR
BLUETOOTH DEVICES.
• WHEN PAIRING A NEW DEVICE, PRESS THE PAIR BUTTON AGAIN, AND REPEAT
STEPS ABOVE.
• UP TO SIX DEVICES CAN BE STORED IN THE SPEAKER’S MEMORY.
014.
CONNECTING VIA BLUETOOTH
002.
004.
005.
003.
005.
LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PRESSING SOURCE/WAKE
ON THE SPEAKER. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING RED
LIGHT IF NO DEVICE IS CONNECTED, AND A SOLID RED LIGHT IF A DEVICE
IS CONNECTED. ACTON SPEAKER WILL NOW AUTOMATICALLY SEARCH FOR
PAIRED DEVICES FOR 3 MINUTES, AND THE LED WILL RAPIDLY FLASH RED
DURING THE SEARCH. THE ACTON SPEAKER WILL LOCATE DEVICES WITHIN
RANGE THAT HAVE PREVIOUSLY BEEN CONNECTED AND WILL CONNECT
THEM AUTOMATICALLY. IF NO DEVICES ARE LOCATED WITHIN THREE MINUTES, THE ACTON SPEAKER WILL REVERT TO STANDBY STATUS (EITHER
POWERSAVER MODE OR STANDARD MODE, DEPENDING ON WHICH OPTION
YOU CHOOSE. THERE IS MORE INFORMATION ON MODES IN THE STANDBY
MODES SECTION ON PAGE 020.). IF THE PAIR BUTTON IS PRESSED WHILE
BLUETOOTH IS SELECTED AS THE AUDIO SOURCE, THE ACTON LOUDSPEAKER WILL PERFORM A NEW SEARCH FOR THREE MINUTES AFTERWARDS, DURING WHICH TIME, THE LED LIGHT WILL RAPIDLY FLASH RED.
016.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE ACTON LOUDSPEAKER
IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT.
• IF A SEVENTH DEVICE IS CONNECTED, DEVICE A WILL NO LONGER BE MEMORISED.
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN
START ACTON LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.
BLUETOOTH AUTO CONNECTION
IF A DEVICE IS MOVED OUTSIDE THE RANGE OF THE ACTON SPEAKER
(APPROXIMATELY 10 METRES WITHOUT OBSTACLES), THAT DEVICE IS
THEN DISCONNECTED. THE DEVICE IS AUTOMATICALLY CONNECTED AGAIN
WHEN IT IS MOVED BACK WITHIN RANGE. THE ACTON SPEAKER STORES
UP TO SIX DEVICES AND ALWAYS STARTS SEARCHING FOR THE LAST
DEVICE THAT HAS BEEN CONNECTED. IF THE ACTON SPEAKER HAS BEEN
CONNECTED TO DEVICES A–B–C–D–E–F IN THAT ORDER, DEVICE F IS
GIVEN FIRST PRIORITY, WHILE DEVICE A IS GIVEN LAST PRIORITY. EVERY
TIME THE ACTON STARTS UP, IT WILL PERFORM AN AUTO CONNECTION OF
DEVICES WITHIN ITS RANGE.
CONNECTING SOURCES BY CABLE
THERE IS ANOTHER WAY TO CONNECT TO YOUR ACTON – THE OLD
FASHIONED WAY, USING SPEAKER WIRES AND THE 3.5MM INPUT.
• INPUT: 3.5MM STEREO PLUG
USE THE DOUBLE-ENDED COIL CORD WITH 3.5MM PLUGS TO
CONNECT TO AUDIO SOURCES THAT HAVE AUDIO OUTPUT SUCH AS
A MOBILE TELEPHONE, IPHONE/IPAD/IPOD, MP3 PLAYER, OR
AIRPORT EXPRESS.
018.
INPUT: 3.5MM STEREO PLUG
001. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE INPUT
LABELLED INPUT 1 ON THE LOUDSPEAKER.
002. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE MUSIC PLAYER.
003. SELECT INPUT 1 AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE INPUT 1 LED IS LIT (SEE PAGE 015.).
001.
003.
STANDBY MODES
ON THE BACK OF YOUR ACTON, YOU WILL FIND A SWITCH THAT ALLOWS
YOU TO CHOOSE BETWEEN TWO DIFFERENT STANDBY MODES: POWERSAVER OR STANDARD.
EUROPEAN UNION REGULATION STATES THAT ELECTRONIC DEVICES
MAY ONLY HAVE 0.5W POWER CONSUMPTION IN STANDBY MODE (THE
EUROPEAN DIRECTIVE ON ENERGY RELATED PRODUCTS, OR ERP). THIS
IS WHY THE ACTON’S FACTORY DEFAULT SETTING IS THE POWERSAVER
MODE, BECAUSE THE POWERSAVER MODE SAVES MORE ENERGY THAN
THE STANDARD MODE.
AS THE NAME IMPLIES, USING THIS SETTING SAVES POWER. WHEN YOU
STOP PLAYING MUSIC, THE ACTON WILL GO INTO A LOW-POWER STATE
AFTER 20 MINUTES. POWERSAVER MODE CAN BE DISABLED IF YOU WANT
ACTON TO START AUTOMATICALLY AND STAY VISIBLE ON YOUR LIST OF
BLUETOOTH DEVICES AFTER 20 MINUTES. TO DISABLE POWERSAVER,
SIMPLY CHANGE THE SWITCH TO STANDARD MODE.
001. 002.
020.
POWERSAVER & STANDARD
001. POWERSAVER STANDBY MODE: THE ACTON WILL GO TO POWER
SAVING STANDBY MODE AFTER 20 MINUTES OF NOT RECEIVING A
SOUND SIGNAL. IF YOU HAVE CHOSEN TO USE THE POWERSAVER
STANDBY MODE, THE ACTON WILL NOT WAKE UP AUTOMATI-
CALLY WHEN YOU BEGIN PLAYING MUSIC AND WILL NOT SHOW UP
AS AN AVAILABLE DEVICE IN YOUR BLUETOOTH LIST AFTER IT HAS
GONE INTO THIS LOW-POWER STATE. TO ACTIVATE ACTON AND
PLAY MUSIC FROM ANY SOURCE AFTER THE UNIT HAS GONE TO
STANDBY MODE, PRESS THE WAKE BUTTON ONCE. THIS WILL BRING
THE ACTON BACK TO LIFE AND READY TO PLAY AGAIN.
002. STANDARD STANDBY MODE: THE ACTON WILL GO INTO STANDBY
MODE AFTER 20 MINUTES OF NOT RECEIVING A SOUND SIGNAL.
IF YOU HAVE CHOSEN TO USE THE STANDARD STANDBY MODE, THE
ACTON WILL AUTOMATICALLY ‘WAKE UP’ WHEN THE LAST
SOURCE IS PLAYED. FOR EXAMPLE, IF A SOURCE CONNECTED WITH
A CABLE BEGINS TO PLAY, THE SPEAKER WAKES UP AUTOMATICALLY
WHEN THAT SOURCE IS SELECTED. IF A BLUETOOTH DEVICE WAS
USED AS THE LAST SOURCE, SIMPLY TOUCHING THE LATEST
BLUETOOTH DEVICE TO HAVE BEEN USED WILL WAKE THE ACTON
UP AUTOMATICALLY. IF YOU WANT TO PLAY ANOTHER BLUETOOTH
DEVICE INSTEAD OF THE LAST ONE USED, PRESS THE WAKE BUTTON
ONCE TO PLAY MUSIC AGAIN.
ADJUSTING THE VOLUME/BASS/TREBLE
TURN THE KNOB TO ADJUST THE:
001. VOLUME
002. BASS
003. TREBLE
022.
TECHNICAL INFORMATION
SOUND SPECIFICATION
• ACTIVE STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM
• BASS AND TREBLE TONE CONTROLS
• CLASS D AMPLIFIER: 2X8W+1X25W
• WOOFER: 1X 4”
• TWEETER: 2X 3/4”, FERROFLUID COOLED
• MAX SPL: 100DB SPL @ 1M
(GROUND PLANE 300HZ, 1%THD)
• FREQUENCY RANGE: 50- 20.000HZ
• CROSSOVER FREQUENCY: 4200HZ
CONNECTIVITY
• BLUETOOTH: STANDARD V4.0
• INPUT 1 - 3.5MM: 1X
TECHNICAL INFORMATION
• MAINS INPUT VOLTAGE: 100-240VAC/70W
• ABSOLUTE MIN/MAX: 90-264VAC
• MAINS FREQUENCY: 50-60Hz
• MAX PEAK POWER CONSUMPTION: 70W
• TWO STANDBY MODES: POWERSAVER MODE (0,40W)
AND STANDARD MODE (3,5W)
• MAX POWER OUTPUT: 50W RMS
• WEIGHT: 3.00KG
• SIZE: 265 X 160 X 150MM
NOTE: THE FRONT FRET IS NOT REMOVEABLE. THIS ILLUSTRATION INTENDS TO
SHOW THE INTERNAL SPEAKER LAYOUT. DO NOT ATTEMPT TO REMOVE THE
FRONT FRET FOR RISK OF DAMAGING YOUR ACTIVE LOUDSPEAKER.
TROUBLE SHOOTING
PROBLEM CAUSE
THE ACTIVE LOUDSPEAKER WILL NOT
TURN ON.
THE SOUND IS WEAK
OR THERE IS NO
SOUND AT ALL.
THE SOUND IS
DISTORTED.
SHARP CRACKLING/
CLICKING ON STRONG
PASSAGES/TRANSIENTS.
ERRATIC PERFORMANCE.
The power cord is not plugged into a
working wall socket or not plugged into
the power jack on the back of the active
loudspeaker.
The 3.5mm cord/input cable/signal cable is
not correctly connected to either the active
loudspeaker or the music player.
The volume level is too low on the active
loudspeaker.
The volume level is too low on the music
player.
The volume level is too high.
The original sound le (mp3) is of poor quality.
Excessive playback volume.
Too much bass/treble boost.
Clipping when the amplifier runs out of
power.
Interference from another source or
electronic device.
024.
ACTON
ACTION
Plug the power cord into a working wall socket and plug the connector
into the power jack on the back of the active loudspeaker.
Unplug and re-plug the 3.5mm cord/input cable/signal cable into
both the active loudspeaker and the music player.
Turn up the volume on the active loudspeaker.
Turn up the volume on the music player.
Turn down the volume.
Try another sound file (mp3) or music player.
Turn down playback level on the volume knob or reduce the sound
level on the music player.
Turn down the volume control on the control panel and/or music
player. Reduce the bass boost on the control panel or excessive bass
boost/eq on the music player.
Turn down the volume on the speaker or on the music player.
Reduce the bass boost.
Move the active loudspeaker to another spot or turn off or move
other electronic devices.
BLUETOOTH TROUBLE SHOOTING
PROBLEM CAUSE
BLUETOOTH WILL NOT
CONNECT.
BLUETOOTH
CONNECTION DOES
NOT WORK AS WELL
AS IT SHOULD.
THE SOUND QUALITY
IS POOR WHEN
CONNECTED THROUGH
BLUETOOTH.
BLUETOOTH
CONNECTION IS
BROKEN OR
DISRUPTED.
THE ACTON
LOUDSPEAKER
CANNOT FIND A
BLUETOOTH
CONNECTION.
Acton is too far away from your device
during the pairing process.
You may be in an area with poor reception.
The greater the distance between the Acton and the Bluetooth device, the poorer
the sound quality will be.
The Bluetooth connection only works
when it is near the device. The connection
is automatically broken if the Bluetooth
device moves outside of the area. The
connection may even be affected due to
obstacles such as walls or doors.
The loudspeaker cannot search or connect
correctly in the following cases:
• If there is a strong electric field
surrounding the Acton.
• If the Bluetooth device is turned off, not
available or does not function as it should.
• Please note that items such as, for
example, microwave ovens, wireless network adapters, fluorescent lights and gas
cookers use the same frequency range as
the Bluetooth device, which could lead to
electrical disturbances.
026.
ACTON
ACTION
Place the Acton closer to the Bluetooth device during the pairing
process.
Move to an area with better reception to improve Bluetooth connectivity.
Move the Acton closer to the Bluetooth device. If the distance
exceeds the Bluetooth device’s wireless range, the connection will
be lost.
Ensure that the Acton is placed near the Bluetooth device, and unobstructed by obstacles such as walls or doors.
Please ensure that there is no electrical interference surrounding the
Acton, that your Bluetooth device is on and working properly.
NOTES:
• A BLUETOOTH DEVICE COULD CAUSE SOUND-RELATED OR TECHNICAL FAULTS,
DEPENDING ON USE, IN THE FOLLOWING CASES:
- WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/
TRANSMITTING SYSTEM FOR THE BLUETOOTH DEVICE OR THE ACTON LOUDSPEAKER.
- ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
- EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME
FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS
AND WIRELESS NETWORKS.
• THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
• YOU DO NOT NEED TO ENTER THE PIN CODE (PASSWORD) WHEN CONNECTING THE
BLUETOOTH DEVICE TO ACTON SPEAKER. IF THE WINDOW FOR ENTERING THE PIN
CODE IS DISPLAYED, YOU SHOULD ENTER <0000>.
• YOU CANNOT CONNECT TO A BLUETOOTH DEVICE THAT ONLY SUPPORTS THE HF
(HANDS FREE) AREA FUNCTION.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device."
This equipment should be installed and operated with a minumum distance of 20 cm
between the radiator and your body.
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement."
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le
radiateur et votre corps.
Apple TV, Airport Express, iPhone, iPod, iPod Classic, iPod Nano, iPod Shuffle, iPod Touch,
iPad and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.
© 2014 CSR plc and its group companies.
WWW.MARSHALLHEADPHONES.COM
Loading...