Marshall 1959SLP, 1987X, 2245 ‘JTM45’, 1962 ‘Bluesbreaker’ Owner`s Manual

Owners Manual

1959SLP

1987X

2245 ‘JTM45’

1962 ‘Bluesbreaker’

21

From the Chairman

I would like to personally thank you for selecting one

of my vintage re-issue amplifiers.

The Marshall reputation has been built upon many
things, but our longevity comes mainly as a result of
the continual relevance of the concepts behind the
design and build of our amplifiers. Added to this are
solid workmanship, reliability, stylish looks, and above
all – great tone. The continual fascination and love that
many guitarists show for our vintage amplification is a
testament to just how relevant and important these
models still are today.

The amp you have just acquired was originally
launched in the 1960s. A time when the face and
sound of popular music was rapidly changing and
players were constantly pushing back the musical
boundaries. Each of these amps was there at the
beginning of this music revolution and all played their
part. From Pete Townshend, Eric Clapton and Jimi
Hendrix, to Jeff Beck and Paul Kossoff, the list of great
‘tone’ players who pioneered the use of the natural
distortion from these amps, reads like a who’s who of
guitar players.

Our re-issues of these models are as faithful as
possible to the originals in terms of looks and tone.
Hand-crafted in the UK these superb units feature
finger-jointed cabinets of birch plywood, hand-welded
chassis’s, hand-wired potentiometers and valve bases
and the highest quality PCBs and componentry.

I would like to wish you every success with your new
amplifier and welcome you to the family of great
players who use the classic Marshall tone.

WARNING! - Important safety instructions

WARNING: THIS APPARATUS MUST BE EARTHED!

A PLEASE read this instruction manual carefully before switching on.
B ALWAYS use the supplied mains lead, if a replacement is required please contact your authorised

Marshall Dealer.

CNEVER attempt to bypass the fuses or fit ones of the incorrect value.
D DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
E Refer all servicing to qualified service personnel including replacement of fuses and valves. Servicing is

required when the apparatus has been damaged in any way, such as when the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.

FNEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the

apparatus.

G ALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
HPROTECT the power cord from being walked on or pinched particularly at plugs, convenience receptacles and

at the point where they exit from the apparatus.

I DO NOT switch the amplifier on without a loudspeaker connected.
J ENSURE that any extension cabinets used are of the correct impedance.

➲

Note: This equipment has been tested and found to comply with the requirements of the EMC directive

(Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U.

➲

EUROPE ONLY - Note: The Peak Inrush current for the 1987X is 26 amps.

The Peak Inrush current for the 1959SLP is 38 amps.
The Peak Inrush current for the 1962 (Bluesbreaker) is 26 amps.
The Peak Inrush current for the 2245 (JTM45) is 26 amps.

➲

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance may

void the users authority to operate the equipment.

➲

Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the
1987X, 1959SLP, 1962 (Bluesbreaker) and the 2245 (JTM45) are of a high quality screened type. These should
not exceed 10 metres in length.
Always use a non-screened Marshall approved speaker lead when connecting an extension cabinet to these units.

➲

WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!

USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS

KEEP THESE INSTRUCTIONS !

ENGLISH

ENGLISH

!